Safety & Warnings
- Do not attempt to use this product if the cable or plug is damaged or defective. If it suffers damage or malfunction, stop using it immediately and contact Kogan.com.
- Ensure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over.
App Installation
Download the “Kogan Smarter Home” app from the Play Store (Android) or App Store (iOS).
Register SmarterHome™ Account
If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS.
To register:
1. Tap to enter registration page.
2. The system will automatically recognise your country/area. You can also select your country code manually. Enter your mobile phone number/email address and tap “Next”.
If you choose the mobile phone number option, then enter the verification code sent to you by SMS. Set a password as prompted and press “Confirm” to finish your registration.
3. Create a profile on the next page to define your location and room.
Add a Device by Scanning QR Code
1. Power the camera on.
2. Make sure Wi-Fi is available and your phone is connected to the internet.
3. Open the Kogan SmarterHome app and tap “Add Device” or “+” in the upper right to add a new device through the network.
4. Select “Camera” on the next screen.
5. Ensure the camera is waiting to be paired (making short beeps), if not, press the reset button for around 5 seconds until it does and then tap “next step”.
6. Select Wi-Fi network (note: network must be 2.4GHz band), enter the password and tap “Confirm”.
7. Read the instructions on the screen then tap “Continue”.
8. Scan the device with QR code, after the prompt is heard, tap “I Heard a Prompt” and wait for the device to be paired.
9. After successfully configuring the device, the device will be shown on the home page. Tap to enter its control page.
Google Home
Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device.
1. Select “Menu” and then “Home Control”.
2. In the “Home Control” screen, select the + icon in the bottom right.
3. A list will appear showing actions and a search function to access more apps: from here, install the SmarterHome™ app.
 |
 |
 |
|
Login to App |
Add Device |
Select Device |
4. Log into your SmarterHome™ account with your email address or mobile number.
5. Once linked, it will show the devices linked to your account: you can assign them to rooms. You will be prompted to authorise apps to sync.
6. Click “Done” and then it will give you a list of commands available.
7. When successfully linked, you will see it on your “Home Control” screen at the bottom of the app screen. You can now control your Kogan SmarterHome™ devices through Google Home.
 |
 |
 |
|
Set Up New Device |
Add and Manage Device |
|
 |
 |
|
Assign Room |
Update Home Control |
Alexa
Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device.
1. Select “Menu” and then “Skills”.
2. Search for the app and enable it.
3. Log into your SmarterHome™ account with your email address or mobile number.
4. Select “Discover Devices” and the app will begin searching.
5. When successfully linked, you will see a list of connected Kogan SmarterHome™ devices. You can now control your Kogan SmarterHome™ devices through Alexa with your voice.
 |
 |
 |
|
Alexa Account Setup |
Search App in All Skills |
Enable App |
 |
 |
 |
|
Login to App |
Discover Devices |
Setup Device |
Operation
The camera provides a live video feed and motion control through the app.
The camera should be reset in a new network environment. Long press the reset for 5 seconds to perform a factory reset.
The use of a high-speed Micro SD card (8GB–64GB) is recommended to store recorded footage and to support important functions such as firmware upgrades.
The device will sound a warning prompt in it detects an abnormality in operation (for example, if the network is disconnected).
Note:
Do not install the camera in environments with lots of metal.
Specifications
|
Resolution |
2.0MP |
|
Video Compression |
H.264 High Profile |
|
Image Enhancement |
Digital White Dynamic 3D Noise Reduction |
|
Network Encryption |
WEP/WPA/WPA2 Encryption |
|
Power Input |
5V/2A |
|
Network Standard |
2.4G 802.11 b/g/n |
In The Box
 |
 |
 |
 |
|
Smart Camera |
Screw Accessories package |
USB Power Cord |
Power Adaptor |