Kogan Solar Powered String LED Light (200 LED, Warm White, 21.9m) - (KASFL200WWB) - Manual – Kogan.com Help Centre

Safety & Warnings

This product is not a toy. Ensure it is kept away from children under 3 years old.
This product contains small parts which may pose a choking hazard.
Do not allow children to play with this product as it contains sharp parts.
Keep away from fire or other sources of heat.
Avoid dipping the batteries and power cable into water.
Some condensation may form inside the unit or solar panel in cold conditions. This is normal and not a cause for concern.
The light bulbs are not replaceable, do not attempt to replace any bulb. The LED bulb’s life is over 20,000 hours.

Remove the product from the package and ensure all parts are in good condition.
Attach the solar panel to the cradle on the anchor spike.
Turn the ON/OFF switch to the ON position.
Use the Mode button to cycle through the 8 lighting modes.
Install the light in a suitable position where it does not pose a hazard of any kind.
Ensure the ground where the spike is to be installed is will support the light.

The light is designed for outdoor use only. Place it in an open location where it can receive direct sunlight.
Avoid installing the unit under shadows of buildings, trees and walls.
The unit is designed to illuminate in dark conditions and may not operate if other sources of strong light reflection on the panel. Avoid streetlights and floodlights that impact the PIR sensor.