Safety & Warnings
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- When the appliance is not in use and before cleaning, unplug the appliance from the outlet firstly.
- The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
- Never attempt to repair the chair. The chair must be repaired by a Kogan technician or a qualified service technician.
- Never disassemble, modify, repair or transform the chair, to prevent serious injury, death or property damage.
Operating Environment
- Do not use the massage chair outdoors.
- Do not use or store the chair in a wet place, such as a bathroom to avoid electric shock, fire, malfunction or mould.
- Do not use near smoke, heat or fire, such as stoves, electric heaters and so on.
- Do not let children use the device alone, or those who cannot safely operate the chair.
- Do not let children near the massage chair unsupervised, or allow them to play on it. The device is not a toy and could cause electric shock or injury if used incorrectly.
- Always turn off the power after use to prevent injuries.
- When not in use, unplug the power plug, so as to avoid dust or moisture caused by insulation aging.
- To prevent electric shock, use a properly grounded outlet, and do not use with any other devices on the outlet. Consult an electrician if you are unsure if your house is properly grounded.
- Do not slide or drag the chair over easily damaged flowing or surfaces.
If you are experiencing any of the following, consult a doctor before use:
- Patients with malignant tumours or malignant abscesses.
- Pregnant women, or during puerperal or menstrual period.
- High fever.
- Suffering from acute illness.
- Suffering from osteoporosis.
- Perceptual disorders.
- Anemia.
- Using a pacemaker.
- Spine abnormality.
- Receiving medical treatment or are in physical discomfort.
- Legs have serious blood circulation issues.
- People sensitive to heat.
Never allow anyone to use the chair who:
- Is suffering an illness and has not consulted a doctor.
- Does not have the ability, experience or knowledge to use the product safely.
Safety Warnings
- Use time is limited to 30 minutes. Some parts are time-limited to 5 minutes or less. Using the chair for a very long time can cause muscle pain and neuralgia. The total use time in a day should be limited to 30 minutes or less.
- Do not use it immediately after a meal in order to avoid discomfort. When feeling physical discomfort, immediately stop using and consult a doctor.
- When using, take off any jewellery or loose items, to avoid accidents or injuries.
- Confirm the location of the massage balls and then slowly sit down, so as to avoid accidents or injuries.
- When you put down your feet, keep the area clear. Make sure there are no, people, especially children, small animals or items below your legs to avoid injury.
- When the devices massages the head area, pay attention to the action of massage the ball, do not force it.
- Do not fall asleep during use.
- Before and during use, do not use medical supplies, cosmetics, creams or lotions on the product or on the body.
- Do not put your hand inside of the fuselage when the machine is working.
- Do not sit or step on the controller.
- Do not throw or kick the controller.
Overview
Chair
Controller
Installation
1. Ensure that the chair is placed in a location with plenty of space.
2. In order to prevent damage to the ground, please put a carpet under the massage chair.
3. Before inserting the plug, make sure that all the operating buttons, including the main power switch, are off.
4. Insert the plug into the socket, turn on the power switch.
Operation
Starting the Chair
- Flick the switch on the massage chair back to the on position to turn the chair on. The display screen will light up. The massage chair will enter standby mode.
- Press the power button on the controller. The machine will turn on, and the LCD will display shoulder adjustment.
- The massage chair is ready to adjust the shoulder height. The up or down key on the controller is to adjust the height of the massage head. After three seconds, it will enter the automatic massage program.
- Automatic mode: Press the Auto button to activate automatic mode, then press the up and down keys. Select the required automatic massage program (easy massage, fatigue recovery. improve soreness, sleep patterns).
- Manual program: In the manual program mode, press the up and down buttons to select the massage method and speed. Press the left or right button to select the corresponding:
- Massage method:
- Pat
- Knead and Pat
- Knead and Rap
- Knead
- Shiatsu
- Tap
- The massage speed:
- Slow
- Middle
- Fast
- The massage width:
- Wide
- Medium
- Narrow
- The massage position:
- Fixed point
- Whole-body
- Shoulder
- Waist
- Massage method:
- Other functions: In the other functions mode, press up or down to select the corresponding functions: Roller switch, Roller speed, Heating switch, Vibration. First, choose Roller switch, press the left or right button, select to turn on or turn off the roller speed: Slow, Middle, Fast, Heating, and Vibration.
- Settings: In the menu setting mode press the up and down key to select the boot time and language. Choose boot time by pressing left or right key to set massage definite time, five minutes for a grade, total six grades, Choose language English.
- Press and hold “
” or “
” to adjust the height of the massage chair.
- Press“
” to activate zero gravity mode.
- The device has an auto-reset function. When this activates the massage program will end, and the massage chair will automatically reset. If you want to stop at any time, press the power button to make the chair reset.
- Automatic mode: Press the Auto button to activate automatic mode, then press the up and down keys. Select the required automatic massage program (easy massage, fatigue recovery. improve soreness, sleep patterns).
Modes | ||
Automatic mode | Press the auto button to enter the automatic program of the menu interface. There are four automatic massage modes. | Easy massage |
Fatigue recovery | ||
Soreness improved | ||
Sleep mode | ||
Manual mode |
Enter the manual program on the menu page |
Massage method:
|
Massage speed:
|
||
Adjust the position of the massage ball head w Width:
|
||
Massage position:
|
||
Roller switch: Turn the roller massage on or off |
||
Roller speed. Select the speed of roller feet massage:
|
||
Heating switch: Choose to turn on the back heating or turn off |
||
Vibration switch: Choose to turn on the buttocks vibration or turn off |
Buttons
![]() |
Press and hold to make the backrest rise. |
![]() |
Press and hold to make the backrest descend. |
![]() |
Press to activate Zero Gravity massage mode. |
![]() |
Turns the heating function on or off. |
![]() |
Press to turn seat vibration on or off. |
![]() |
Choose between four automatic modes. |
Button Display Instructions
![]() |
Power button Press the button to start shoulder adjustment, press the up or down button to adjust the position of the massage head. After three seconds, it will enter into automatic mode. |
![]() |
Press the menu button to enter the interface, press the up and down buttons to select the automatic program, airbag program, manual program, and other functions and settings. |
Switch Mode
During the automatic mode, you can switch to another automatic mode with the auto button or manual mode. In automatic mode, you can also turn the chair on or off, increase or decrease the pressure, or adjust the heating or roller. The flashing icon in the LCD screen is the current massage program.
During manual mode, you can also change the mode during use. Use the corresponding buttons.
Specifications
Power | 100W |
Voltage | 220V-240V |
Frequency | 50Hz-60Hz |
Working time | 15-30min |
Cleaning and Care
Daily Maintenance:
- The massage chair should be placed in a clean, dry place.
- Avoid storing in direct sunlight or high temperature to prevent leather discolouration or stripping.
- If you do not use it for a long time, please cover with a cloth.
- To clean the massage chair, make sure it is closed and unplug the power cord.
- Do not use organic cleaning agents that may cause the leather to age or peel.
- Wipe the remote control with a dry cloth to avoid moisture entering the electronic parts.
- If the power cord or plug is damaged, it must be replaced by a Kogan service technician or another qualified service technician.