Safety & Warnings
Read all instructions before using the appliance and retain for reference.
- Unplug the monitor before cleaning it with a slightly damp, clean cloth.
- Wiping the screen once it has been turned off with a dry microfiber cloth is recommended.
- Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
- This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
- Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
- Do not insert any objects or spray any liquids into the vents.
- Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
- Unplug the monitor if it is not going to be used for an extended period.
- Do not place heavy objects on the monitor, its power cord or any connected cables.
- Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
Overview
Monitor Controls
| 1 |  |
Menu Button: Press to display the OSD menu or enter sub-menus. |
| 2 |  |
Down Button: Press to move down in the menus. |
| 3 |  |
Up Button: Press to move up in the menus. |
| 4 |  |
Exit Button: Press to exit. |
| 5 |  |
Power Button: Press to turn the monitor on/off. |
| 6 | LED Indicator: Change colours to indicate status. | |
Monitor Ports
| 7 | Audio Output: Insert one end of the Audio cable into the computer’s audio output to receive the audio signals from your monitor. |
| 8 |
HDMI Connector: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor's HDMI port. |
| 9 | DP Connector: Insert one end of the DP cable into the computer's DP output and connect the other end of the monitor's DP port. |
| 10 | Power Connector: Insert the power cable to supply power to the monitor. |
Assembly Instructions
Stand
Note: Keep the foam underneath the monitor before attaching the stand.
1. Open the package, take out the product with foam still attached and gently place it on a desktop or table.
2. Take out the bracket and base and lock them together with a screw.
3. Take off the upper foam, lock the assembled base with a screw on the back shell fixed base bracket.
4. Take out the bracket decorative cover from the accessory bag and install it into the bracket fixing hole.
5. Use both hands to stand the assembled machine on a flat desktop.
Note: Do not directly press and hold the LCD screen with your hand during assembly to prevent the screen from breaking.
Wall Mounting
1. Open the carton, remove the foam, remove the upper foam and remove the decorative cover of the shaft.
2. Lock the two 27.5mm VESA screws in the upper two holes on the rear of the monitor and the two 17mm VESA screws in the lower two holes.
3. Your monitor is now ready to be attached to a wall-mounting bracket. To avoid damage, please do not pinch the screen during bracket installation.
Connectivity
Power Cable
Connect the included power cable to the power connector and then plug the other end into a power outlet.
Earphones
Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices not included.
HDMI
In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer.
DP
In order for the monitor to receive DP signal from the computer, use the DP cable to connect the monitor to the computer.
Operation
Note: Insert one end of the DP cable into your PC's graphics card. An HDMI cable may also be used. An HDMI cable is not included.
1. Connect the other end of the cable to the corresponding connector on your monitor.
2. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.
3. Locate the power button on the monitor and press it to turn the monitor on.
FreeSync
The feature itself is off by default when setting 100Hz refresh rate. In order to use this feature, please note you must have hardware with FreeSync capability, a Displayport cable and the latest graphics drivers. To use this feature, connect your computer and monitor with a Displayport cable. After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu. See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source, no horizontal or vertical signal has been detected. Please ensure your computer is on and all video cables are fully inserted and/or connected.
Working Process
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on the screen after turning on the monitor and pressing the button.
|
When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc. |
1. Press any one of the buttons (, , , , ) to activate the navigation window.
2. Press 
to enter the OSD menu.
3. Press or to browse functions.
- Highlight the desired function, then press to enter the sub-menu.
- Press or to browse sub-menus, then press to highlight the desired function.
- Press or to highlight an option, then press to confirm the settings and exit the current screen.
4. Press 
to exit the current screen.
List of Functions
|
Main Menu |
Sub-Menu |
Options |
Description |
|
BRIGHTNESS |
Brightness |
0~100 |
Adjust display brightness |
|
Contrast |
0~100 |
Adjust display contrast |
|
|
ECO |
Standard, Game, RTS, FPS, Movie, Text |
Set visual mode |
|
|
DCR |
On |
Turn on DCR function |
|
|
Off |
Turn off DCR function |
||
|
IMAGE |
Aspect |
Wide, Auto, 4:3 |
Set aspect ratio |
|
COLOR TEMP. |
Color temp. |
Warm, User, Cool, |
Adjust colour temperature |
|
Red |
0~100 |
Customize RGB components |
|
|
Green |
0~100 |
||
|
Blue |
0~100 |
||
|
OSD SETTING |
Language |
English, Espanol, |
Set OSD language |
|
OSD H. POS. |
0-100 |
Adjust the OSD horizontal position |
|
|
OSDV.POS. |
0-100 |
Adjust the OSD vertical position |
|
|
OSD Timer |
0~60 |
Set how long the OSD remains open after non-use |
|
|
Transparency |
0-100 |
Set the OSD overall transparency |
|
|
RESET |
Reset |
N/A |
Reset monitor configurations |
|
MISC |
Signal source |
HDMI, DP |
Display the input signal |
|
Volume |
0-100 |
Adjust audio volume |
|
|
Low blue ray |
0-100 |
Set blue light filtering level |
|
|
Over driver |
High, Middle, Low, Off |
Set overdrive function |
|
|
LED effect |
Off, Normal, Flicker |
Set LED rear display modes |
|
|
FreeSync |
On, Off |
Turn on/off FreeSync |
, Francais, 
, Portugues, Deutsch, Turkce, 
,
ECO Modes and Game-plus Switching
1. Press any one of the buttons (, , , , ) to activate the navigation window.
2. Press to switch Game-plus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.
3. Press to switch ECO modes. These modes include Standard, Text, Movie, Game, FPS and RTS modes and can be used to optimize settings according to your activity. Standard mode is suitable for most activities.
Specifications
|
Screen Size |
29" |
|
Aspect Ratio |
21:9 |
|
Backlight |
E-LED |
|
Brightness |
300cd/m2 |
|
Panel |
VA |
|
Resolution |
2560x1080 |
|
Refresh Rate |
100Hz |
|
Response Time |
5ms(GTG) |
|
Viewing Angle |
≥178°(H)/ ≥178°(V) |
|
Contrast Ratio |
3000:1 |
|
VESA Mounting |
75x75 |
|
Colours |
16.7M |
|
AMD FreeSync |
YES |
|
Signal Inpt |
DP*1, HDMI1.4*2 |
|
Power |
DC 12V-4. 0A |
|
Audio |
|
|
Speakers |
NO |
|
Audio Out |
YES |
|
Accessories |
|
|
Adapter |
YES |
|
DP Cable |
YES |
|
Additional Functions |
|
|
Low Blue Light |
YES |
|
Flicker-Free |
YES |
|
Physical Dimensions |
|
|
Dimensions (w / Stand) |
693.26 x 186.58 x 410.52(mm) |
|
Dimensions (w / o Stand) |
693.26 x 115.66 x 318.82(mm) |
|
Net Weight |
4.17kg |
|
Gross Weight |
6.15kg |
In the Box
 |
 |
||
| A | Monitor | E | PM4x12mm Screws(x3) |
 |
 |
||
| B | Stand Stem | F | VESA connectors |
 |
 |
||
| C | Stand Base | G | Power Adapter |
 |
 |
||
| D | Bracket trim cover | H | DP cable |
 |
|||
| I | User Guide | ||