Step 1
When you start up your TV for the first time, you will enter the Setup Wizard. Press OK to continue.
Step 2
The first step is to set your preferred language. Using the arrow keys, navigate to your preferred language and confirm with the OK button.
Step 3
The device is a Smart TV and therefore, uses data and connects to the internet when applicable. Please read the End-User License Agreement and select Accept if you are ready to proceed.
Step 4
The TV will enter the WiFi setup page. If you are ready to setup WiFi, navigate to your network and press OK.
Step 5
Select the password box, and the onscreen keyboard will come up. Input your WiFi networks password.
Step 6
If you would like to setup Netflix at this stage, select Start Netflix. Enter your Netflix credentials to proceed. Otherwise, select Skip to continue to the next step.
Step 7
You can now tune your TV to receive Digital TV. It is highly recommended that you complete this step during the setup process, but if you cannot, it can be completed later through the TV's settings.
If you do not wish to scan for channels, select No and skip steps 8 and 9.
If you would like to scan for channels, ensure your TV is connected to an antenna port with a strong signal, and then select Yes.
Step 8
The Auto Tuning settings should be the same as shown below.
Step 9
Once you have updated all of the settings as shown, navigate to the bottom to select Start.