Safety and Warnings
Note:
Ensure you have read and fully understand the instructions for this device. Failure to do so could cause damage or serious harm.
- When you start training with this product, please consider your physical condition, train properly and regularly to ensure that you have enough physical strength to train. Wrong or excessive training will not help your health.
- This product is not suitable for children. Children can use the product, but only under the supervision of adults. The device is not a toy.
- Only people who have a good understanding of the product and are very healthy should use the device.
- This product is suitable for home use, not suitable for professional training and testing, or medical purposes. If the cable is damaged, it must be replaced by Kogan or a qualified service person in order to avoid danger.
- Please check all parts before use. And make sure the screws and nuts are tightened.
- When running on a treadmill, wear comfortable tight clothes to avoid clothes being caught by the machine. Do not let children or pets to play around the treadmill to avoid accidents.
- Place the treadmill on a smooth, clean, level surface. Make sure there are no sharp objects nearby. Do not use it near water and heat sources.
- Please keep your hands away from all moving parts. Do not place your hands and feet in the gap below the running belt.
- The treadmill must have only one user at a time.
- Make sure the screws and bolts are tightened after the treadmill is assembled.
- If the product is not in use, store the machine in a safe place to prevent the danger caused by children and those who are not suitable for using the treadmill.
- In an emergency, quickly pull down the safety switch and step on the left and right side of the treadmill.
- Place the treadmill properly before use. The left and right handrails need one-metre of safety gap, and the back needs two metres. There should be no items in the safety gap.
- Only use accessories provided with the machine, or authorised for use by Kogan.
- The product is a domestic grade product with a maximum user weight of 100kgs.
Important Notes
- Place the treadmill in a place where the plug can be plugged into the socket.
- Plug the device into a socket and ensure it is not loose.
- Ensure the socket has been installed professionally.
- If the plug and socket are not compatible, do not change the plug by yourself. Ask an electrician to handle it.
- Only use a supply voltage of 240V.
- Do not let the power cord touch the running belt roller, and do not use a damaged plug.
- Unplug the plug from the socket before cleaning and maintenance.
- WARNING: if the plug is not pulled out, it may lead to personal injury and equipment damage.
- Please check each part carefully before use.
- Do not use this product outdoors, in high humidity and in the sun.
- Turn off the machine and remove the plug when you are finished using it.
- For your safety, the power plug of the machine must be grounded.
Overview
Installation
No |
Name |
Qty |
No |
Name |
Qty |
1 |
Linking Slider Connecting Tube |
1 |
2 |
Left Column |
1 |
3 |
Right Column |
1 |
4 |
Main Frame |
1 |
5 |
Digital Watch Holder |
1 |
6 |
Left Foot Combination |
1 |
7 |
Right Foot Combination |
1 |
8 |
Left Linkage Combination |
1 |
9 |
Right Linkage Combination |
1 |
10 |
Frame Folding Support Frame |
1 |
11 |
Motor Base |
1 |
12 |
Left Handrail Fixing Aluminium Parts |
1 |
13 |
Right Handrail Fixing Aluminium Parts |
1 |
14 |
Left Aluminium Frame |
1 |
15 |
Right Aluminium Frame |
1 |
16 |
Running Board |
1 |
17 |
Front Roller |
1 |
18 |
Rear Roller |
1 |
19 |
Aluminium Slide |
2 |
20 |
Gas Spring |
1 |
21 |
Foot Switch Pressure Spring ∮8* ∮ 1*13.5 White Zinc Plating |
4 |
22 |
Foot Switch Pressure Spring ∮8* ∮1*40 White Zinc Plating |
2 |
23 |
Safety Lock Iron |
1 |
24 |
L-Shaped Hexagon Wrench 6mm |
1 |
25 |
Cross Open-End Wrench ∮5 10-13-14-15-17 Plating White Zinc |
1 |
26 |
Tube Bushing |
1 |
27 |
Running Belt |
1 |
28 |
Belt |
1 |
29 |
Running Board Cushion ∮25*H22*M8 |
8 |
30 |
Cushion ∮ 23*H25*M8 |
2 |
31 |
Frame Mat |
2 |
32 |
Aluminium Frame Wire Plug |
1 |
33 |
Pipeline Plug |
1 |
34 |
Silicone Oil Tank |
1 |
35 |
Oil Pot Silicone Tube |
1 |
36 |
Motor |
1 |
37 |
Magnetic Ring |
1 |
38 |
Power Line |
1 |
39 |
Concave Socket |
1 |
40 |
Overload Protector |
1 |
41 |
Switch |
1 |
42 |
AC Branch Cable |
1 |
43 |
AC Connecting Wire (Black) |
1 |
44 |
AC Connecting Wire (Red) |
1 |
45 |
Grounding Wire |
1 |
46 |
Safety Lock |
1 |
47 |
Digital Watch Core |
1 |
48 |
Lower Communication Line 1, 200mm |
1 |
49 |
Lower Communication Line 2, 200mm |
1 |
50 |
Upper Communication Line 500mm |
1 |
51 |
Safety Lock Line 150mm |
1 |
52 |
Speed Switch Line 200mm |
1 |
53 |
Adapter Plate |
1 |
54 |
Remote Control |
1 |
55 |
Controller |
1 |
56 |
Speaker |
2 |
57 |
Magnetic Steel |
1 |
58 |
Motor Top Cover |
1 |
59 |
Motor Bottom Cover |
1 |
60 |
Motor Left Cover |
1 |
61 |
Motor Right Cover |
1 |
62 |
Motor Top Cover Front Foot Pad |
2 |
63 |
Pedal Trim |
2 |
64 |
Pedal |
2 |
65 |
Left Rear Corner |
1 |
66 |
Right Rear Corner |
1 |
67 |
Rear Corner Insert |
2 |
68 |
Left Sidebar |
1 |
69 |
Right Sidebar |
1 |
70 |
Rack Rear Foot Pad |
2 |
71 |
Frame Side Cover |
2 |
72 |
Frame Side Cover Pipe Plug |
2 |
73 |
Lower End Pipe Plug |
2 |
74 |
Lower End Screw Cap |
2 |
75 |
Slider |
2 |
76 |
Meter Upper Cover |
1 |
77 |
Meter Bottom Cover |
1 |
78 |
Mobile Phone Holder |
1 |
79 |
Aluminium Frame Screw Cover |
2 |
80 |
Movement Roller |
2 |
81 |
Side Buckle ∮6.2*∮12*T1.5 (White) |
8 |
82 |
Plastic Gasket ∮8* ∮17.5*T2.5 (White) |
4 |
83 |
Plastic Gasket |
2 |
84 |
R Type Clamp |
3 |
85 |
Oil Cap |
1 |
86 |
Mat Φ8-16*T1.5 |
14 |
87 |
Spring Pad Φ8-14*T2.0 |
2 |
88 |
Corrugated Pad |
4 |
89 |
Cross Screw M4*10 With Spring Pad And Mat |
1 |
90 |
Locknut M6 |
2 |
91 |
Locknut M8 |
13 |
92 |
Half-Round Screw M6*10 |
4 |
93 |
Half-Round Screw M6*20 |
2 |
94 |
Half-Round Screw M8*20 |
2 |
95 |
Half-Round Screw M8*45 |
8 |
96 |
Half-Round Screw M8*105 |
1 |
97 |
Hexagon Socket Head Cap Screw M8*30 |
1 |
98 |
Hexagon Socket Head Cap Screw M8*30 |
1 |
99 |
Hexagon Socket Head Cap Screw M8*60 |
3 |
100 |
Flat Head Socket Cap Screw M6*15 |
16 |
101 |
Flat Head Socket Cap Screw M8*20 |
4 |
102 |
Flat Head Socket Cap Screw M8*25 |
8 |
103 |
Flat Head Socket Cap Screw M8*10 |
8 |
104 |
Flat Head Socket Cap Screw M8*15 |
4 |
105 |
Cross Flat Self-Tapping Screw ST3.0*10 |
2 |
106 |
Cross Flat Self-Tapping Screw ST4.0*10 Φ8 |
13 |
107 |
Cross Flat Self-Tapping Screw ST4.0*16 Φ8 |
4 |
108 |
Cross Recessed Raised Countersunk Head Tapping Screw ST4.2*16 Φ8 |
10 |
109 |
Cross Recessed Raised Countersunk Head Tapping Screw ST4.2*16 Φ10 |
17 |
110 |
Cross Recessed Raised Countersunk Head Tapping Screw ST4.2*16 Φ10 |
4 |
111 |
Manual |
1 |
112 |
Silicone Oil |
2 |
113 |
Sticker |
1 |
114 |
Inside Column |
2 |
The main structure of the treadmill you purchased has already been assembled in the factory. It can simply be used when plugged in. The following steps show how to use the handrails and how to fold and unfold them.
1. Lift the treadmill out of the box and place it on a level surface. Make sure there is a 50cm open space behind and in front of the treadmill to fold and place the power cord. etc.
2. Put your feet on the footswitch and pull up the handrails with your hands until the footswitch hooks handrail.
3. As shown below, the tail of the treadmill can be raised with both hands to move forward and backward, which is only suitable for short-distance movement within the room.
4. Turn on the power, turn on the switch and turn on the treadmill and enjoy the exercise.
Folding the Treadmill Vertical
First, fold the handlebar into the running platform, then grab the tail of the running platform with both hands and lift it up.
Note: Unplug the power cord when folding.
The treadmill is laid flat: Grab the tail of the treadmill with both hands, gently put it on the ground and follow the installation steps.
Operation
Operating Instructions in Manual Normal Mode
When using the treadmill, only use a grounded power socket.
- Place the treadmill horizontally on the ground.
- Turn on the power, turn on the power switch. The power switch indicator lights up and the buzzer will sound once.
- Check if there is any abnormal data on the screen. Stand on the anti-skid board before clicking the start button to prevent accidental falls.
- Attach the safety lock to the safety lock position on the panel, clip the safety clip on your clothes and then enter the manual normal mode.
- Press the start button, the electronic watch window will display: 3 - 2 - 1, the buzzer will sound and then the motor will start.
- The starting speed is 1.0km/h. You can press the speed +, - keys to adjust the speed and select the appropriate speed for your needs.
- The folding handlebars are for walking mode, with a speed range of 1.0 - 6.0km/h.
Note: In this mode, please unplug the security lock and start the machine.
- Expand the handlebar to enter running mode, the speed range is 1.0 - 12km/h.
Note: In this mode, please put the security lock and start the machine.
Bluetooth Speaker Connection:
Connection method
- Check your Mobile phone connection network - Wi-Fi, 3G or 4G.
- Turn on your mobile phones Bluetooth and search for the Treadmill Bluetooth connection. The Bluetooth name is ZLJ.
- After the Bluetooth is connected, you will hear “Bluetooth connected successfully”.
- You can now enjoy the Bluetooth speaker.
Important Notes for Operation
- Do not press start, and then jump onto the running belt whilst it is moving. Instead, stand on the running belt and turn on the treadmill.
- Do not start the treadmill in quick mode.
- Do not start running without a safety lock.
Window display:
"SPEED" Window:
Displays the current speed. The speed range is 1.0-12.0km/h. When the countdown starts and "3", "2" and "1" are displayed.
TIME ± Window
Display’s exercise time from 0:00-99:59. When the time is 99:59, the treadmill speed steady decreases until it stops running.
Countdown mode will decrease the time until it is zero. When the countdown reaches 0:00, the treadmills speed will steadily decrease until it stops running. It will then enter standby after stopping completely.
DIS±Window
Displays the distance travelled from 0.00-99.90. After the distance is maxed out, it will begin counting down to zero. When the countdown reaches 0, the treadmill speed steadily decreases until it stops running. The treadmill will go into standby after stopping completely.
“CAL” Window:
Display’s the calories expended. The positive count starts from 0.0-999.0, and it will begin again after maxing out.
When the count is reversed, it decreases from the set value until it reaches 0. When the countdown reaches 0, the treadmill speed steadily decreases until it stops running. The treadmill will go into standby after stopping completely.
Remote Button Function
- “□” is the start/stop button: This button can be used to stop the treadmill from running state and reset to zero during exercise. Use this button also as the start button when the power is on and the safety lock in its position.
- “+" is the speed increasing button: Adjust the speed after the treadmill starts, its adjustment range is 0.1km/time and it continues to increase when it is held for more than 1 second.
- “-” is the speed decreasing button: Adjust the speed after the treadmill starts, the adjustment range is 0.1km/time and continues to decrease when it is held for more than 1 second.
Quick Start Mode (Manual Mode):
- Turn on the power switch.
- Press “□”, the system will enter into a 3-second countdown, the buzzer sound will be heard and the speed window will display the countdown. After the 3 seconds countdown, the treadmill will start running at 1.0km/h.
- After starting, you can use the "Acceleration" and "Deceleration" buttons to adjust the speed of the treadmill as needed.
Operation During Exercise:
- Pressing the "-" button will slow down the speed of the treadmill.
- Press the “+” button to increase the running speed of the treadmill.
- Press the “□” button to slow down the running speed until it stops running.
APP Guide Operation
- Download YPOO treadmill APP: Please enter YPOO in Apple APP Store or Google Play. Then you can download the treadmill app freely.
- Create your Account: Enter the necessary information to create your sport account.
- Select Training Plan: Select a training plan and create a customised plan on the app, then you can control your treadmill from your smartphone remotely and do your customised exercise!
Note:
- You can choose your local language and set your local language. You can choose English, Chinese or Korean.
- This app will protect your privacy and will not collect any personal information.
Numerical display range:
Setting parameters |
Start |
Default |
Setting range |
Display Range |
Time (min: sec) |
0:00 |
- |
- |
0:00-99:59 |
Incline (%) |
- |
- |
- |
- |
Speed (km/h) |
1.0 |
1.0 |
1.0-12.0 |
1.0-12.0 |
Distance (km) |
0:00 |
- |
- |
0.00-99.90 |
Heart rate (/MIN) |
- |
N/A |
N/A |
- |
Calorie (Kcal) |
0.0 |
- |
- |
0.0-999.0 |
Treadmill shutdown instructions:
The treadmill can be turned off at any time by turning off the power switch so that it does not damage the treadmill.
Walk and running mode change:
When pulling up the treadmill handrail, check whether the safety lock is in position. The treadmill speed range is 1.0-12.0km in this mode. It is the running mode.
When pulling down the treadmill handrail, take down the safety lock. The treadmill speed range is 1.0-6.0km. It is the walk mode.
Error
E02 |
Overvoltage protection |
E03 |
Over-current protection |
E04 |
Motor open-circuit |
E06 |
Communication error |
E07 |
Insert the security lock |
EOC |
Burst protection |
Cleaning and Care
Once the treadmill has been run on for 50km cumulatively (about 3 months), maintenance is needed. Put the lubricating oil (about one third each time) squeezed into the silicone oil valve and then the running belt will automatically be lubricated.
Tips:
- Do not use sandpaper or solvents to clean the treadmill.
- The controller part of the treadmill should not be exposed directly to the sun or moisture to avoid damage.
- Please check and tighten all accessories of the treadmill frequently. Damaged parts must be replaced immediately, contact Kogan support.
Running belt adjustment
Adjusting the running belt has two functions: Tightening adjustment and running belt centre position adjustment. The running belt has been adjusted at the factory. However, after use, the running belt will be stretched or deviated from the centre plate and cause damage to the running belt trim strip and the rear cover by friction. It is normal for the running belt to be stretched during use. When the running belt is slippery or not smooth during use, you can improve it by adjusting the tightness of the belt.
How to adjust the running belt?
- Insert the 6mm Allen key into the adjusting screw on the left side of the running belt and rotate the wrench clockwise 1/4 to adjust the rear roller to tighten the running belt.
- Repeat step 1 to adjust the right screw. Check that the adjustment screw rotates the same distance so that the rear roller is adjusted parallel to the frame.
- Repeat steps 1 and 2 until the running belt does not slip.
Note: The running belt can't be adjusted too tightly, which will break the running belt and increase the pressure of the front and rear rollers, causing problems such as roller bearing damage and abnormal noise. If you want to reduce the tension of the running belt, turn the Allen key counterclockwise. Check that the left and right sides are rotated to the same distance.
Adjusting the running belt to the middle position
When using the treadmill, the pressure on the running belt is unbalanced because the two feet exert different forces when running, which causes the belt to deviate from the centre. This deviation is normal. When no one is on the running belt, it will return to the centre. If it does not return to the centre, you will need to adjust the belt back to the centre.
- Make sure there is no load on the belt and adjust the speed to 6km/h.
- Observe the distance from the running belt to the left and right border.
- If the running belt deviates to the left side, turn the left screw clockwise 1/4 with an Allen key.
- If the running belt deviates to the right side, turn the right screw clockwise 1/4 with an Allen key.
- If the running belt is still not in the centre, repeat the above steps until it is adjusted to the centre.
- After adjusting the running belt to the middle, adjust the speed to 1km/h and observe the deviation of the running belt. Check whether the belt is slipping. If there is a deviation, repeat the running step.
Warning! Do not overtighten the rollers! This will cause permanent bearing damage. If the above steps are not effective, you need to tighten the running belt again.
Specifications
Colour |
Black |
Net Weight |
44kgs |
Running Belt |
45 x 126cm |
Product Size |
153 x 76 x 20cm |
Peak Horsepower |
Peak 2.0hp |
Walking Mode |
1.0-6km/h |
Running Mode |
1.0-12km/h |
Bluetooth Speaker |
Yes |
Shock Absorption |
Yes |
Max User Weight |
220lbs |
Standing Size |
1530 x 760 x 1100mm |
Fold Size |
1530 x 760 x 200mm |
In The Box
![]() |
![]() |
![]() |
Treadmill |
Remote controller |
2 x Silicone oil |
![]() |
![]() |
|
Installation tool |
Security lock |