Kogan 24" Curved Freesync Gaming Moniter 1920 x 1080 75Hz - (KAMN24F7CLA) - Manual – Kogan.com Help Centre

Safety & Warnings

Read all instructions before using the appliance and retain for reference.

Unplug the monitor before cleaning it with a slightly damp, clean cloth.
Wiping the screen once it has been turned off with a dry microfiber cloth is recommended.
Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
Do not insert any objects or spray any liquids into the vents.
Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
Unplug the monitor if it is not going to be used for an extended period.
Do not place heavy objects on the monitor, its power cord or any connected cables.
Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.

Overview

Monitor Controls

1		Menu Button: Press to display the OSD menu or enter sub-menus.
2		Down Button: Press to move down in the menus.
3		Up Button: Press to move up in the menus.
4		Exit Button: Press to exit.
5		Power Button: Press to turn the monitor on/off.
6	LED Indicator: Change colours to indicate status.

Monitor Ports

7	HDMI Connector: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor's HDMI port.
8	VGA Connector: Insert one end of the VGA cable into the computer's VGA output and connect the other end to the monitor's VGA port.
9	Audio Output: Insert one end of the Audio cable into the computer’s audio output to receive the audio signals from your monitor.
10	Power Connector: Insert the power cable to supply power to the monitor.

Assembly Instructions

Stand

Note: Keep the foam underneath the monitor before attaching the stand.

Open the package, take out the product with foam still attached, and gently place it on a desktop or table.

Turn the bracket on a slight angle and align it with the circular slot of the base. Insert the bracket into the base, and then rotate clockwise to clamp the bracket into the base to complete the installation of the base.

Place the assembled bracket base in the groove and push it up tightly. Note: during disassembly, only press the arm handle to unlock (as shown by the arrow), and the internal buckle can be taken out.

Use both hands to stand the assembled machine on a flat desktop.

Note: Do not directly press and hold the LCD screen with your hand during the whole machine's erection to prevent the screen from breaking.

Wall Mounting

Open the carton, remove the foam, remove the upper foam and remove the decorative cover of the shaft.

Lock the two 26mm VESA screws in the upper two holes on the rear of the monitor, and the two 20mm VESA screws in the lower two holes.

Your monitor is now ready to be attached to a wall-mounting bracket. To avoid damage, please do not pinch the screen during bracket installation.

Connectivity

Power Cable

Connect the included power cable to the power connector, and then plug the other end into a power outlet.

Earphones

Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices not included.

HDMI

In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer.

VGA

In order for the monitor to receive VGA signals from the computer, use the VGA cable (not included) to connect the monitor to the computer.

Operation

Insert one end of the DP cable into your PC's graphics card. An HDMI cable may also be used. An HDMI cable is not included.

1. Connect the other end of the cable to the corresponding connector on your monitor.

2. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.

3. Locate the power button on the monitor and press it to turn the monitor on.

FreeSync

The feature itself is off by default when setting 144Hz refresh rate. In order to use this feature, please note you must have hardware with FreeSync capability, an HDMI cable, and the latest graphics drivers. To use this feature, connect your computer and monitor with an HDMI cable. After connecting, you may receive a prompt to enable the feature on your computer. If you do not receive the prompt, you may need to enable the function in your graphics card menu. See your graphics card manufacturer’s documentation for instructions on how to turn on and/or enable FreeSync.

Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source, no horizontal or vertical signal has been detected. Please ensure your computer is on and all video cables are fully inserted and/or connected.

Working Process

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and appears on the screen after turning on the monitor and pressing the button.

When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc.

1. Press any one of the buttons (, , , , ) to activate the navigation window.

2. Press to enter the OSD menu.

3. Press or to browse functions.

Highlight the desired function, then press to enter the sub-menu.
Press or to browse sub-menus, then press to highlight the desired function.
Press or to highlight an option, then press to confirm the settings and exit the current screen.

4. Press to exit the current screen.

List of Functions

Main Menu	Sub-Menu	Options	Description
BRIGHTNESS	Brightness	0-100	Adjust display brightness
	Contrast	0-100	Adjust display contrast
	ECO	Standard, Game, RTS, FPS, Movie, Text	Set visual mode
	DOR	On	Turn on DOR function
	DOR	Off	Turn off DOR function
IMAGE	Aspect	Wide, Auto, 4:3	Set aspect ratio
COLOR TEMP.	Color temp.	Warm, User, Cool,	Adjust color temperature
	Red	0-100	Customize RGB components
	Green	0-100
	Blue	0-100
OSD SETTING	Language	English, Espanol, , Francais, , Portugues, Deutsch, Turkce, , , Polski, Italiano, Nederlands	Set OSD language
	OSD H. POS.	0-100	Adjust the OSD horizontal position
	OSD V.POS.	0-100	Adjust the OSD vertical position
	OSD Timer	0-60	Set how long the OSD remains open after non-use
	Transparency	0-100	Set the OSD overall transparency
RESET	Reset	N/A	Reset monitor configurations
MISC	Signal source	HDMI1, HDMI2, DP	Display the input signal
	Volume	0-100	Adjust audio volume
	Low blue ray	0-100	Set blue light filtering level
	FreeSync	On, Off	Turn on/off FreeSync

ECO Modes and Game-plus Switching