Safety & Warnings
- Keep the device away from fire and do not immerse it in water.
- The device does not have any charger.
- Do not attempt to disassemble the product. If it suffers any failure or damage, contact Kogan.com.
Overview
Parts
- Solar panel
- ON/OFF
- PIR motion inductor
- LED lamp beads
The solar panels and lights can be rotated during installation for optimal performance.
Operation
Unlocking and Activating the Device
The internal battery is locked for shipment. Before use, switch the on/off socket with the supplied pin to unlock the battery and lighting system.
Charging Via The Solar Panel
Install the device facing south and ensure that the solar panel can receive good sunlight directly without any shelter or cover.
Normally, it will charge fully in one day under bright sunlight.
Motion Activation
The device will turn on automatically when motion is detected.
The brightness will be stronger when motion is detected within 3 metres.
When motion is distant, it will come on dimly, which can serve as illumination for the homeowner or visitor.
Note:
- Prior to first use, allow the light to charge for 2 or 3 sunny days.
- If there is no good sunlight in 3 months, the battery may run dry and require recharging with bright sunlight.
- If the light blinks, charge the light immediately.
- If there is no sunlight, it may take longer to fully charge the device, as is normal for solar products.
Specifications
Solar panel |
1.5W, 17% efficiency |
Li-ion battery |
2000mAh |
Weight |
377g |
LED |
56PCS SMD2835 |
Lumens |
120 MCD |
LED span life |
50,000 hours |
Solar charging time |
8 hours |
Protection functions |
Overcharging, over-discharging, over-current and short circuit |
Li-ion battery span life |
500 circles |
Solar panel span life |
More than 5 years |
In The Box
- 1x Solar sensor light
- 1x Quick start guide
- 1x Hanging wall panel
- 1x Key pin
- 2x Expansion pillar-hinge
- 2x Screw