- Ensure the installation surface is clean and dry before you start.
- Assemble the first as shown in images 1 and 2 above. Peel off the 3M adhesive from the latch first before installation.
Note: The illustrations below may not reflect your cabinet or drawer style and design and the setup may vary slightly.
Refer to images 3 and 4 below if the door DOES NOT close into the frame. Align the cradle as shown in image 2 with the side frame of the drawer or cabinet (image 4).
Refer to images 5 and 6 below if the door DOES close into the frame. Install the cradle as shown in image 2 at a depth equal to the thickness of the door (image 6).
Peel off the 3M adhesive of the lock on the cradle and attach the lock on the cabinet door (image 7).
Attach the key holder to the wall or any place out of the child’s reach.
To open cabinet, touch the magnetic key on the surface of the cabinet door (image 11).
To lock it, simply release the magnetic key (image 12).
When no child is present, pull the switch up for easy quick access (image 13).
To lock again, pull the switchback down (image 14).