Safety & Warnings
- Service Environment: 0 - 40°C
- Unplug the power plug before cleaning, wipe the dust on the surface with a damp cloth when cleaning and be careful not to let water drops into the internal parts or loosen the connector.
- Check carefully to ensure correct and complete assembly before using.
- Familiarise yourself with all functions and program settings of the product before first use.
- This product is not a toy. Do not allow children to play with the product or be around it without supervision.
- Some slight noise caused by the belt or brake system is normal and will not have any effect on the use of the equipment.
- Do not clean the equipment with corrosive or abrasive materials.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
- Ensure there are no hazards in your operating environment: e.g., do not leave tools around. Dispose of the plastic packaging materials as they may pose a choking hazard to children.
- Keep the original package of the equipment if necessary in case of the future use in transportation.
Overview
Notes: The drawings below are only for reference and may be slightly different from the product you receive. If you are missing any parts or have any issues installing, please contact Kogan.com.
Part List
No. |
Part |
Quantity |
1 |
![]() |
2 x Pedestal |
2 |
![]() |
1 x Column |
3 |
![]() |
1 x Column |
4 |
![]() |
1 x Supporting beam |
5 |
![]() |
1 x Transmission rod |
6 |
![]() |
2 x Supporting plate |
7 |
![]() |
1 x Adapter |
8 |
![]() |
2 x Baffle |
9. |
![]() |
1 x Control panel |
10 |
![]() |
1 x Power cable |
11 |
![]() |
4 x Cable tie |
Control panel
- "▲" Adjust the desk upwards
- "▼" Adjust the desk downwards
- "1" Position 1, first height position saved by the user
- "2" Position 2, second height position saved by the user
- "3" Position 3, third height position saved by the user
- "M" Height memory function
- "A" Alert button to remind users changing posture
Installation
Step 1
Install pedestal (1).
Connect (1), (2) and (3) together: use 5x5 wrench (C) to tighten the screws (A).
Step 2
Install supporting beam (4).
Lay column (2) down as in picture 1 and install (4): use a wrench (C) to tighten screws (B). Install column (3) as in picture 2. Adjust the support to suit table top dimensions.
Step 3
Install transmission rod (5).
Install (5), (2) and (3), as in picture 1 first and then picture 2: use 2.5x2.5 wrench (D) to tighten.
Step 4
Install supporting plate (6).
Install (6), (2) and (3), use 5x5 wrench (C) to tighten the screws (A).
Step 5
Install adapter (7) and control panel (9).
Distance between the desktop edge and supporting should be not more than 200mm.
Install desktop with screw (F): use the drill to tighten.
Step 6
Install baffle (8).
Install (8) using 2.5x2.5 wrench (D) to tighten the screws (E).
Connect all cables to the adapter (7).
Operation
Height Adjust Function
Press "▲" or "▼" to adjust the height. The LED display shows the current height.
Height Memory Function
- Use "▲" or "▼" to set to the desired height. Press "M" to save the height and the screen will display " ";
- Press "1", "2" or "3" to store the height at that number.
- Press "1", "2" or "3" to adjust the desk to the stored one.
Reminder Function
- Press REMINDER button "A" to activate the function. The LED display shows
- Two seconds later, press the "▲" or "▼" button to adjust the reminder time only when the display screen flashes. The default time of the reminder is 45 minutes, which is shown as "45". Then press any button to save the time setup or wait 5 seconds and the system will save the time setup automatically. During the countdown, any operation will lead to a repeat starting of the timer. When the countdown finishes, the display screen will show "00" and a beeping tone will be produced.
- Within the 10-second reminder tone, press any button to reactivate the timer countdown that is set up in (b) step. If no operation takes place during the 10-second reminder buzz, there will be another reminder buzz after 5 minutes. No operation during the second buzz will turn off the reminder.
- Press and hold the "A" button for three seconds to tum off the reminder. The LED display will show "
".
Specifications
Maximum Load | 70kg |
Maximum Speed | 25mm/s |
Input Voltage | 100-240V |
Lowest Position | 710mm |
Highest Position | 1210mm |
Desktop Size |
1000-1600mm |
Working Environment | 0–40°C |
Troubleshooting
Issue | Steps to Resolve |
No response while long-pressing down arrow after connected with a power supply | 1. Ensure all cables are connected well. |
2. Contact Kogan.com | |
No response while pressing up arrow/down arrow after connected with a power supply | 1. Ensure all cables are connected well. |
2. Contact Kogan.com | |
Rising in a low speed | 1. Check if overloaded. Maximum loading: 70kg |
2. Contact Kogan.com | |
The motor does not move as instructed | 1. Contact Kogan.com |
Goes down but not goes up | 1. Re-position. |
2. Contact Kogan.com | |
Downward sliding | 1. Check if overloaded. Maximum loading: 70kg |
2. Contact Kogan.com | |
Frequently re-positioning | 1. Check if overloaded. Maximum loading: 70kg |
2. Contact Kogan.com | |
Overwork (Duty cycle: Maximum 2 minutes on/18 minutes OFF) | 1. Turn off and restart after 18 minutes. |
2. Contact Kogan.com | |
Height adjustment range limited | 1. Press "M" and "3" together for 3 seconds to restore factory settings: it will beep to confirm. |
2. Contact Kogan.com |
- When the LED shows"", press "▼" button until the desk reaches the lowest height to carry out a reset.
- If the LED display shows "E01" or "E02", wait 18 minutes and retry.
- If the “▼” button doesn't work, check the cable connection and disconnect power for at least 10 seconds, reconnect power and restart.
If the issue persists, contact Kogan.com.
In The Box
Disposal
![]() |
This marking indicates that this appliance should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. |