Return to Kogan.com Account Login

Certa 16000mAh Water Resistant Portable Jump Starter - (CTJMPSTW16A) - Manual

mceclip0.png

 

Safety & Warnings

  • Use only the originally supplied smart battery clamps with the device.
  • Do not use this unit if the cable clamp or cord is damaged.
  • Do not connect two clamps together when the product is turned on.
  • Do not connect both cable clamps to the same piece of metal. Otherwise, the jump starter will be damaged.
  • DO NOT use the product to start a bulging, damaged or faulty car battery.
  • Store the product in a shaded, well-ventilated area.
  • Handle the product with care and do not abuse it. Avoid dropping or striking the product heavily or repeatedly.
  • DO NOT disassemble or modify the product.
  • DO NOT use detergents to clean the product.
  • DO NOT place the products in a high-temperature environment for long periods of time.
    • The operating temperature of this product is -20-60°.
    • The storage temperature of the product should not exceed 50°C.
  • Check the battery level of the product at least once every three months and ensure it is sufficiently charged.
  • Keep the product away from children and pets.

 

Overview

 

mceclip1.png

 

No.

Function

Operation

1

ON/OFF Button (Multi-functional)
  • Press to charge and display the remaining capacity.
  • Press and hold to turn the flashlight on/off.

2

Charge Indicator Lights

Shows the charging progress: 25%, 50%, 75% and 100%.

3

LED Flashlight

Flashlight modes: Solid, SOS, Flash and Off

4–5

USB Output Port 1-2 (QC 3.0)

Charge your devices using QC 3.0, which is faster than standard charging.

6

USB-C Input

Charge the jump starter via USB-A to USB-C cable.

7

Micro USB Input Port

Charge the jump starter via the Micro USB cable.

8

Jump-Starting Port

Connect the jump starter plug

9

Black Clamp

Connect the black clamp to the negative terminal of the car battery.

10

Red Clamp

Connect the red clamp to the positive terminal of the car battery.

11

Plug

Connect the jump starter plug

12

Battery Clamp Indicator Lights

Shows the status of the smart battery clamp.

13

Force Start Button

Press to force start if the car battery voltage is too low.

 

Operation

 

Charging the Product

  1. Connect the jump starter and the power source via the USB-C cable or Micro USB cable.
  2. Short press the ON/OFF button to turn on the product. While charging the jump starter, the battery level indicator will flash. Once it is fully charged, all 4 battery level indicator lights will be on.
  3. Unplug the cable when no charge is required.

Note:

  • When using the product for the first time, make sure that the jump starter is fully charged.
  • Please use the provided USB-C cable or Micro USB cable to charge the product.
  • Wall adapter is not included in the package.

 

Power Bank

  1. Connect your device to the via USB cable.
  2. Press the ON/OFF button to turn on the product.
  3. Unplug the cable when no charge is required.

 

LED Flashlight

Long press ON/OFF button for 3 seconds to turn on the light. Short press ON/OFF button to cycle through Solid, SOS, Flash and OFF

 

Jump Start Car

Note:

  • This product is for 12V cars only (up to all petrol or 6.0L diesel engine)
  • Check to make sure that 3 or 4 indicator lights are illuminated (indicating the battery level is above 50%) before you use it to jump start your car.

Step 1
Insert the plug of the smart battery clamp completely into the jump starter. If the green and red light indicators on the battery clamp are flashing alternately, you are safe to move onto the next step.

 

mceclip2.png

 

Step 2
Connect the red clamp to the positive terminal (+) of the car battery and connect the black clamp to the negative terminal (-) of the car battery. If the green and red light indicators on the battery clamp are flashing alternately, you are safe to move onto the next step.

However, if the red indicator light is on:

  1. The battery clamp may be connected in reverse. If so, you need to disconnect the battery clamp from the vehicle and the jump starter.
  2. Adjust the clamps for maximum contact with battery terminals.

 

mceclip3.png

 

Step 3

 

mceclip4.png

 

a. Start your car.

  • If you failed to start your car, you need to disconnect the battery clamp from the vehicle and the jump starter. Wait for at least 30 seconds and then try again.
  • If you failed to start your car after 3 attempts, you can use the force start function. See step 3-b.

b. (optional): Force Start Function

First please make sure that the clamps are connected to the correct polarity battery terminal. Then, hold the force start button for 3 seconds to start your car. When the indicator light of the smart clamp is solid green, you need to start the vehicle within 30 seconds.

 

mceclip5.png

 

Step 4
Once your car is started, remove the battery clamp from the car battery and the jump starter within 30 seconds.

 

mceclip6.png

 

LED Indicators

 

Indicator

Issue

Resolution

The red/green light will flash

Ready to use

 

The green light is always on

Working normally

 

The red light is always on

1. Battery clamp is connected in reverse.

2. The clamp is short-circuited.
  1. Check whether the clamp is connected in reverse.
  2. Check whether the two clamps are connected together or connect both clamps to the same piece of metal.

The red light flashes slowly

Reverse charging protection, the voltage of the car battery is higher than 12.6V.
  • No jump starter needed, the car battery is enough to start your car.

The red light flashes quickly

The temperature of the clamp exceeds 65(+/-5) degrees.
  • Remove the clamp until the red/green light flash

The green light flashes slowly

The voltage of the jump starter is too low.
  • Try to replace the jump starter or charge it in time.

 

 

Specifications

 

Capacity

16000mAh

Micro USB Input

5V/2A

Type C Input

5V/2A

USB Output 1

5V/3A, 9V/2A, 12V/1.5A

USB Output 2

5V/3A, 9V/2A, 12V/1.5A

Start Current

600A (last for 1s)

Peak Current

1200A (last for 0.2s)

Short Circuit Protection

Enabled

Over-Discharge Protection

≦3v±0.3v

Over-Temperature Protection

>65°±5C°

Reverse Polarity Protection

Enabled

Reverse Charging Protection

≧(12.6v±0.3v)

Dimensions (L*W*H)

185*100*45mm

 

FAQ

 

Question Answer
How do I turn off the product? This product will power off automatically when no load is detected or when charging is complete.
How long does it take to fully charge the jump starter? About 9 hours through the Micro USB input port or Type C input port.
How many times can this product start the vehicle with full capacity? About 20 times.
How many times can this product fully charge my cell phone? It depends on the battery capacity of your cell phone. For example, iPhone 8 can be fully charged 4~5 times.
What are the safety protections of the smart battery clamp? Short-circuit protection, over-temperature protection, over-voltage protection, over-charge protection, over-discharge protection, over-current protection and reverse polarity protection.

 

 In the Box

 

16000mAh Jump Starter

1

Smart Battery Clamp

1

USB Type C Cable

1

Micro USB Cable

1

User Manual

1

Carry Pouch

1

Related articles