The preset combination is 0-0-0 and can be personalised by following these simple steps:
- Turn the dials to the current opening combination.
- Press down the Reset Button (a) with a pen or other tools, then turn the Dials (b) to your desired combination.
- The lock is now set to the desired combination after you released the Reset Button (a) by pushing the Button (c).
You may change your combination and reset your lock again by following the above steps.
Keep your personal combination in a safe place for future reference.
If the cylinder is opened, please lock it again by turning it to the red dot position in the direction of the arrow. Any tool which can be inserted in the cylinder is OK.