Safety & Warnings
For your safety, please read all following instructions carefully before using this device and retain for reference.
- Keep away from children.
- Keep away from flammable and explosive liquids. Don't use in the vicinity of a petrol station.
- Always take care and be observant during use.
- Allow the air compressor to cool after every 8 minutes of use.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support after consulting the Troubleshooting section of this manual.
Overview
Parts |
Function |
||
A |
|
||
B |
|
||
C |
|
||
D |
The micro USB port to charge the built-in lithium battery. |
||
E |
Charging light: Displays red while charging and turns off when fully charged. |
||
F |
Wired power connection, e.g. for car cigarette lighter (optional). |
||
G |
Inflation button: Stops when preset values are reached. |
||
H |
Flashlight: Automatically turns on when G is pressed |
||
I |
Inflation tube |
||
J |
![]() |
![]() |
|
Connectors for boats, flotation rings, balloons, etc. |
Connector for balls, etc. |
Connector for bikes, etc. |
|
K |
USB charge cable |
||
L |
Cigarette lighter cable |
Installation
Step 1
Connect the tube to the air compressor by screwing it on clockwise.
Step 2
Push the button up if there is no airflow.
Step 3
Disconnect the tube from the air compressor by screwing it anticlockwise.
Step 4
When inflating, deflating or monitoring tyre pressure, press the button down. Ensure you choose the right connector for the job.
Inflate: Insert the connector into the tube and screw it on. Press A and B to select air pressure and press the G button to start inflation. It will automatically stop when it is finished.
Deflate: Insert the connector into the tube and attach it with the item to be deflated. Press the tube button down and it will deflate.
Monitor car tyre pressure: Screw the tube on clockwise and connect it to the car tyre. Press A and it will display the tyre pressure.
Specifications
Car power input |
12V/4A |
USB charging input |
5V/2A |
Battery capacity |
6000mAh (2000mAh x 3)/12.4V |
Working temperature |
0°C ~40°C |
Charging time |
Approx. 2 hours |
Reachable pressure |
150psi/10.3Bar/990kPa/10.5kg/cm |
Troubleshooting
Problem |
Solution |
Cannot power on |
Connect with car cigarette lighter or check whether the built-in battery is fully charged |
Cannot inflate, deflate or monitor tyre pressure |
Ensure the button on the tube has been pressed down and the right connector has been used |
No space to press down the button |
Try another direction as indicated below: |
Cannot deflate |
Push the button on the tube up and ensure use the connector is correct. |
Overheating |
Power off after 8 minutes of continuous working and cool for at least 15 minutes |