Safety and Warning
WARNING: Do not use this product if the power cord is damaged. If the power cord is damaged, cease using the product immediately and contact Kogan Support.
 |
Read the instructions carefully. Check no parts are missing. |
 |
Layout all of the components on a soft surface as if you were preparing to do a jigsaw puzzle. |
 |
Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front |
 |
Separate and identify each component from the hardware pack and rest each one in its proper location before fastening. |
Parts
 |
 |
Assembly
|
Step 1 |
Step 2 |
 |
 |
|
Step 3 |
Step 4 |
 |
 |
|
Step 5 |
Step 6 |
 |
 |
Operation
- Insert the power plug into the wall.
- Press the ON/OFF button.
- Press HEAT button to turn on the heating function.
- Press TIMER button to switch between 15min, 30min and 60min.
- Press MODE button to select the desired mode.
- Press INTENSITY button to switch between high and low-intensity vibration.
- Press UPPER BACK, LOWER BACK, HIPS and THIGH buttons to enable or disable massage function to these areas.
Specifications
| Input | 220V, 50Hz |
| Output | DC12V, 1.2A |