In the Box
 |
 |
 |
 |
 |
|
BACK 1PC |
SEAT 1PC |
SEAT MECHANISM 1PC |
ARMREST 2PC |
LEGS 1PC |
|
|
 |
 |
 |
 |
|
GAS LIFT 1PC |
WHEELS 5PC |
BACK PIECE 1PC |
BACK CASING 1PC |
ADJUSTMENT KNOB 1PC |
 |
 |
 |
 |
 |
|
SCREW A 4PC |
SCREW B 10+1PC |
HEADREST 1PC |
HEADREST KNOB 1PC |
LEG COVER 1PC |
Assembly Instructions
Tool Required
Allen key
Step 1
Press the wheels into the leg holes and then place the leg cover and gas lift.
Step 2
Install the seat mechanism on the back piece.
Step 3
Use 6pc Screw B to connect the armrests to the seat. Use 4pc screw A to install the seat mechanism.
Step 4
Use 4pc screw A to connect back to the backs piece. Connect the seat and gas lift and put the gas lift into the mechanism hole.
Step 5
Put the plastic cover on the back.
Step 6
Connect headrest and fix tight with the headrest screw and put the plastic cover on the back. The chair is fully assembled.
 |
 |
 |