Return to Kogan.com Account Login

Kogan 2.1CH 100W Detachable Soundbar with Wireless Subwoofer - (KASBR21DETB) - Manual

mceclip0.png

 

Safety & Warnings


The safety precautions below assist in reducing the risk of fire, electric shock and injury by demonstrating correct use of the device. For this reason, it is extremely important to follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock.

 

Important Warnings and Cautions!

 

mceclip1.png

To reduce the risk of electric shock, do not remove the cover (or back).

This unit contains no user-serviceable parts inside. Refer all servicing to Kogan.com support.

mceclip3.png

The lightning symbol with an arrowhead within an equilateral triangle is intended to alert you to the presence of non-insulated dangerous voltage within the product's enclosure that may be of enough magnitude to be an electric shock risk to anyone who comes in contact with the internal uninsulated components.

mceclip2.png

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

 

Electrical safety and cord handling

 

  • Protect from moisture: Do not expose this equipment, the power supply cord and plug to rain or moisture. Do not use it anywhere near water or where water splashes or drips, such as in a wet basement or near a swimming pool. Do not touch the power plug with wet hands.
  • Voltage: Before connecting this equipment to the mains power supply, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label.
  • Main power connection: When connecting this equipment to the mains power supply, only use the cord and plug supplied. Align the plug properly and insert it fully. Do not overload the power outlet.
  • Damaged cord: When the power cord is damaged, it must be replaced by the manufacturer or similarly qualified personnel in order to avoid a hazard.
  • Protect the power cord: Do not let the cord hang over the edges of a table or counter or touch any hot surface. Do not allow anything to rest on or roll over the power cord. Run any cords so no one steps on or trips over them. Do not run the cord near heat-producing appliances such as radiators or stoves.
  • Disconnect: Switch off and unplug the unit during lightning storms and when it is not going to be used for a while. Grasp the plug, not the cord, when disconnecting.
  • Disconnect device: This equipment must be unplugged for complete disconnection from the mains power supply. Ensure the mains plug remains readily accessible for disconnection.
  • Class II equipment: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

 

Usage conditions and restrictions

 

  • Instructions: Follow the instructions in this manual when installing and adjusting this equipment. Only adjust those controls that are covered in this instruction manual, as improper adjustment of other controls may result in damage. If this happens, unplug the equipment and contact Kogan Support.
  • Location: When using the equipment, make sure to place it:
  1. In a well-ventilated area, keeping a clearance of at least 20cm above and 5cm on each side of the unit to ensure proper ventilation.
  2. Away from heat sources such as radiators, heat registers, stoves or other equipment (including amplifiers) that produce heat.
  3. Away from areas with high temperatures, high humidity or direct sunlight.
  4. Away from excess dirt and dust.
  5. Away from open windows and any place where water or metal objects may get into the equipment and damage it.
  6. Away from strong magnetic fields.
  • Accessories: Only use attachments/accessories specified by the manufacturer or sold with the apparatus. Use of the soundbar with accessories that are not recommended in this manual may cause injury or damage and will void the warranty.
  • Usage restriction: The equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children: Supervise young children to ensure that they do not play with the equipment. Close supervision is always necessary when any appliance is used by or near children.
  • Protect the equipment: Prevent metal objects falling onto the equipment. Do not place heavy objects on top of the equipment or step on it. Do not place objects filled with water (such as vases) or naked flame sources (such as candles), on or near the equipment. If liquid or metal parts enter the system, unplug the power cable immediately and contact Kogan.com support.
  • Ventilation: Openings on the cabinet are provided for ventilation and to protect the unit from overheating. To ensure proper operation, do not cover them with things such as newspapers, tablecloths, curtains etc.
  • Cleaning: Unplug the equipment from the power outlet before cleaning. Clean the equipment only with a clean, dry or slightly damp cloth. Do not use liquid or aerosol cleaners or volatile solvents.
  • Service: If you experience any fault with the product, contact Kogan Support. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, it has been exposed to rain or moisture, or if the product does not operate normally or has been dropped.

Note: Any mishandling or non-compliance with these instructions will void the product's warranty.

 

Overview

 

mceclip4.png

 

Part list:

  1. NFC (Near Field Communication) Sensor.
  2. Speaker
  3. mceclip23.png Power button/Mode: Press to turn on while in Standby mode. Press to select your preferred input source. Press and hold to put it in Standby mode.
  4. PAIRmceclip6.png : Press to select the play or pause function(in Bluetooth/USB mode only).
  5. LED Indicators.
    • Red indicator: in STANDBY mode
    • Red indicator flashing: in COAXIAL mode
    • White indicator flashing: in LINE mode
    • Green indicator lights up: in OPTICAL mode
    • White indicator lights: in HDMI(ARC) mode
    • Green indicator flashing: in USB mode
    • Blue indicator flashing:in Bluetooth mode
    • Blue indicator lights: in Bluetooth pairing mode
    • Indicator flashes: adjust the volume/select a preset sound effect
  1. VOL+mceclip7.png: Increase volume. Skip to the next track. (Bluetooth/USB mode only)
    VOL-mceclip8.png: Decrease volume. Skip to the previous track. (Bluetooth/USB mode only)
  2. Remote control sensor.
  3. LINE in socket.
  4. COAXIAL S/PDIF socket.
  5. OPTICAL S/PDIF socket.
  6. DC power socket.
  7. HDMI (ARC) socket.
  8. USB port.

 

Installation

 

This soundbar unit can be used either as a single soundbar or as 2-piece tube speakers. Installation options include:

Option A:
Two tube speakers installed on stands

mceclip9.png

Option B:
Single soundbar mounted horizontally with rubber feet

mceclip10.png

Option C:
Single soundbar wall-mounted

mceclip11.png

 

Stand Mounting (Option A)

 

Attach a stand to each of the two separate pieces and twist to secure, as illustrated below.

 

mceclip12.png

 

Horizontal Mounting (Option B)

 

Align the two separate pieces and twist to secure, as illustrated below;

 

mceclip13.png

 

You can extend the height of the unit if required. To do so, attach the supplied rubber feet as follows.

  • Ensure the surface of the soundbar is clean prior to attaching the rubber feet.
  • Turn the unit upside down.
  • Remove the backing paper from the rubber feet.
  • Stick the rubber feet to the bottom of the unit, as illustrated below

 

mceclip14.png

 

Wall Mounting (Option C)

Wall-mounted installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal injury and property damage. (If you intend to install this product by yourself, you must check for installations such as electrical wiring and plumbing, which may be hidden inside or behind the wall.)

  • It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of the unit and wall brackets.
  • Additional tools (not included) are required for the installation.
  • Do not over-tighten screws.
  • Use an electronic stud finder to check the wall type before drilling and mounting.

 

mceclip15.png

 

Operation

 

Standby Mode

  • When you first connect the main unit to the mains socket via the AC adapter, the main unit will be in Standby mode.
  • Press the POWER button on the unit or on the remote control to switch the unit ON.
  • Press and hold the POWER button again to switch the unit back to Standby mode. The power indicator will light up red.
  • Disconnect the AC adapter from the mains socket if you want to switch the unit OFF completely.
  • When there is no input signal (or weak input signal) in HDMI (ARC), LINE, Optical and Bluetooth mode (Stop or Pause) for more than 15 minutes, the unit will automatically switch to Standby mode.

 

Mode selection

  • Press the MODE button repeatedly on the unit or the button on the remote control to switch between HDMI (ARC), LINE, USB, Optical, Coaxial and Bluetooth modes.
  • In coaxial optical mode: The status Indicator flashes Red
  • In LINE mode: The status Indicator flash White
  • In USB mode (when the USB drive is connected): The status Indicator flash Green
  • In HDMI (ARC) mode: The White status Indicator lights
  • In optical mode: The status Indicator lights up Green
  • In Bluetooth mode: The status Indicator flash Blue

 

Volume adjustment

  • Press the VOL+/VOL- buttons on the unit or on the remote control to adjust the volume.
  • If you wish to turn the sound off, press the MUTE button on the remote control. Press this button again or press the VOL+/VOL- buttons to resume normal listening.
  • While adjusting the volume, the status indicator flashes quickly.
  • If you press the VOL+or VOL- button, the status indicator flashes once.

 

Preset sound effect selection

  • Press the EQ button on the remote control to select between preset equalisers standard, movie (recommended for viewing movies) and music (recommended for listening to music).

 

HDMI (ARC) / LINE / Optical / Coaxial Operation

  • Ensure that the unit is connected to a TV or audio device.
  • While in ON mode, press the MODE button repeatedly on the unit or on the remote control to select HDMI (ARC), LINE or Optical, Coaxial mode.
  • Operate your audio device directly for playback features.
  • Press the VOL +/-button to adjust the volume to your desired level.

Tip: When in optical mode, if there is no sound coming out of the unit and the green light flashes fast, make sure the audio setting of your source player (e.g. DVD player, game player, TV) is set to PCM with optical output.

 

Playing Bluetooth Enabled Devices

You can listen to tracks from a media device is connected to the unit via Bluetooth wireless technology.

 

Pairing Bluetooth enabled devices

The first time you connect your Bluetooth device to this player, you need to pair your device to this player.

  1. Whilst the device is on, press the MODE button repeatedly on the unit or the remote control to select Bluetooth mode. The blue indicator will flash slowly, indicating that the system has entered pairing mode.
  2. Activate your Bluetooth enabled device and select the search mode. “KASBR21DETB” will appear on your Bluetooth device list.
  3. Select “KASBR21DETB” from the pairing list. The blue indicator will light up solidly if pairing succeeds.
  4. To disconnect the Bluetooth function, switch to another function on the unit or disable the function from your Bluetooth enabled device. The blue indicator will flash slowly.

Important notes

  • The operational range between this player and Bluetooth device is approximately 8m (without any objects between the Bluetooth enabled device and the unit). Any obstacle between the devices can reduce the operational range.
  • Before you connect a Bluetooth enabled the device to this unit, ensure you know the device's capabilities. Compatibility with all Bluetooth devices is not guaranteed.
  • If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode automatically.

Tips

  • The player will also be disconnected when your device is moved beyond the operational range.
  • If you want to reconnect your device to this player, place it within the operational range.
  • If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.
  • If the connection is lost, follow the instructions above to pair your device to the player again.

 

Music playback from Bluetooth enabled device

  1. Pair and connect your Bluetooth enabled device with the soundbar.
  2. Play audio on your Bluetooth enabled device.
  3. Use the remote control to control playback.

Important notes

  • To stream audio via Bluetooth wireless technology, the playback device should support A2DP (Advanced Audio Distribution Profile).
  • To use the playback buttons (Previous/Next, Vol+/-, Play/Pause) on the remote control, the playback device should support AVRCP (Audio Video Remote Control Profile).

 

NFC (Near Field Communication) Operation

Pair your NFC enabled mobile device directly with this unit with just a single tap.

 

mceclip16.png

 

  1. Activate NFC on your mobile device.
  2. Switch the soundbar to Bluetooth mode.
  3. Tap the mobile device on the NFC icon of the unit.
  4. Confirm the Bluetooth connection.
  5. To disconnect, tap the mobile device on the NFC icon of the unit to disconnect or disable NFC from your mobile device.

NOTE: This NFC function only works with mobile devices that support NFC technology.

Tips

  • Some NFC enabled mobile devices cannot pair directly with the unit via NFC. In such a case, please try either one of the solutions below:
  • Please download the App “Tap-and- Pair” from Google Play Store and install.
  • Pair with the unit manually first, then touch again on the NFC sensing area.

 

Remote Control

 

mceclip17.png

 

1

mceclip22.pngPower

Switch the unit between on and standby mode.

2

MUTE

Mute or resume the sound.

3

VOL-/VOL+

Decrease/Increase the volume level

4

  mceclip20.png

In Bluetooth or USB mode, skip to the previous/next audio file.

5

 mceclip19.png 

In Bluetooth or USB mode, start or pause playback.

6

Replay

Replay of single track and all tracks.

7

Mode

Select the input source mode.

8

EQ

Select a preset sound effect.

9

Optical Mode

10

HDMI(ARC) Mode

11

Coaxial Mode

12

Bluetooth Mode

 

Using the remote control

  • The remote control has a range of up to 6 metres from the soundbar. Point the remote control directly towards the sensor at the front of the soundbar.
  • Make sure no obstacles are blocking its path. The remote control will not operate if its path is blocked.
  • Handle the remote control with care. Do not drop, apply shock or step on the remote control. Do not spill the water on the device.
  • Do not use the remote control while simultaneously operating a remote control of another device, as there may be interference.
  • If the remote control is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly due to interference.
  • If you do not intend to use the remote control for an extended period (more than a month), remove the battery to prevent possible damage from battery leakage and corrosion.

Battery precautions

  • Do not use any other battery than specified.
  • There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
  • Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short-circuit, leak or explode.
  • Do not expose the battery to excessive heat such as sunshine, fire or similar.
  • Do not attempt to short-circuit, disassemble or throw batteries into a fire.
  • Never recharge a battery unless it is confirmed to be a rechargeable type.
  • Dispose of batteries promptly and properly, observing any local hazardous waste regulations. Do not burn or bury them.

 

Controls and Connections

 

mceclip24.png

 

LINE Socket
Use the supplied RCA to 3.5mm audio cable to connect the TV’s audio output sockets to the AUX socket on the unit.

Optical/COAXIAL socket
Remove the protective cap from the OPTICAL/COAXIAL socket,then connect an OPTICAL/COAXIAL cable(not included) to the TV's OPTICAL/COAXIAL OUT socket and the OPTICAL/COAXIAL socket on the unit.
TIP: If no sound is coming out of the soundbar and the indicator light flashes fast, make sure the audio setting of your source player, (e.g. DVD player, game player, TV) is set to PCM with optical output.

HDMI (ARC) socket
The ARC (Audio Return Channel) function allows you to send audio input from an ARC-compliant TV to an ARC-compliant audio device (e.g.soundbar) without the need for an additional audio cable connection.
To enjoy the ARC function, make sure the soundbar main unit’s HDMI (ARC) socket is connected via HDMI cable (not included) to the HDMI (ARC) socket of your ARC-compliant TV. Then just use your TV remote control to adjust the volume output(VOL+/-and MUTE) of the connected audio device.

Note

  • Your TV must support the HDMI-ARC and the HDMI-ARC must be set to ON.
  • The setting method of HDMI-ARC may differ depending on the TV for details about ARC functions, please refer to the TV's instruction manual.
  • Make sure the HDMI cable you use can support the ARC function.

 

USB port

This soundbar can play audio files that are stored on a USB stick. Connect your USB stick (not included) to the USB socket for playback.

 

Power connection

 

mceclip25.png

 

  • Before connecting the AC adapter ensure you have completed all other connections.
  • Risk of product damage. Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the AC adapter.
  • Connect the adapter to the main unit and a mains socket.

 

Wireless Subwoofer

Pair the wireless subwoofer with the main unit automatic pairing.

The subwoofer and soundbar will automatically pair when both units are plugged into the mains sockets and turned on. No cable is needed for connecting the two units.

  • The subwoofer should be within 8m of the soundbar in an open area.
  • If a TV or an external device is connected, the main unit and the subwoofer will switch on automatically when the TV or the external device is switched on.

 

Specifications

 

AC Adapter - Input Power Rating

AC 100-240V 50/60Hz

AC Adapter - Output Power Rating

 Soundbar

DC 19V 1.5A

AC Adapter - Output Power Rating

 Subwoofer

DC 19V 2.5A(subwoofer)

Soundbar - Standby Power Consumption

<0.5W

Remote Control Operation Range - Distance, Angle

6m,30 degrees

Soundbar and Subwoofer Operation Range - Distance

8m

Bluetooth Pairing Operation Range - Distance

8m

Soundbar

Rated Power Output

10W/Ch. x4, 4ohm, THD=10%

Subwoofer

Rated Power Output

60W,4ohm, THD=10%

S/N Ratio(Analogue Input)

65dB

Separation(1kHz)

65dB

Bluetooth Pairing Name

KASBR21DETB

Bluetooth Version

5.0

Bluetooth Profiles

A2DP (Advanced Audio Distribution Profile)
A2DP (Audio Video Remote Control Profile)

USB Power Rating

5V 0.5a

Media Code is Supported in USB Mode

Mp3

Distance Between 2 Wall Mounting Points

730mm

Dimensions(WxHxD)

Soundbar

86.5 x 6 x 6.1cm(when L&R speakers are joined together)

Dimensions(WxHxD)

Subwoofer

47 x 14.1 x 26cm

Weight

Soundbar

1.65kg

Weight

Subwoofer

4kg

 

Troubleshooting

This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support after consulting the Troubleshooting section of this manual.

 

Problem

Solution

No power

Ensure that the AC adapter of the apparatus is properly connected.

Ensure that there is power at the AC outlet.

Press the POWER button to turn the unit on.

Remote control does not work

Reduce the distance between the remote control and the unit.

Insert the battery with its polarities (+/-) aligned as indicated. Please check the battery is installed correctly.

Replace the batteries.

Aim the remote control directly at the sensor on the front of the unit.

No response from the unit

Disconnect and reconnect the AC adapter, then turn the unit on again.

Unable to find the soundbar in the Bluetooth device list when pairing

Ensure you have paired the unit with your Bluetooth enabled device.

Ensure the Bluetooth function is activated on your Bluetooth enabled device.

No connection between the main unit and the Subwoofer

Ensure the main cables of the main unit and the subwoofer are both connected securely to the mains power socket.

 

In The Box

 mceclip26.png  mceclip27.png  mceclip28.png

Main Soundbar Unit (left/right)

Subwoofer

Stand x2
 mceclip29.png  mceclip30.png  mceclip31.png

AC Power Adapter(Soundbar 19V1.5A)

AC Power Adapter(Subwoofer 19V2.5A)

3.5mm Line Cable

 mceclip32.png

  mceclip33.png  mceclip34.png

Rubber Feetx3

Wall-mounting screw(rubber column)x2

Remote Control

Related articles