Safety & Warnings
For your safety, please read the following instructions carefully before using this device.
- Do not use this product when it is undercharging.
- Children must be supervised by an adult to use this device.
- People with limited physical mobility or reduced sensibility must be supervised to use this device.
- Do not massage in one region for a long time.
- Prolonged usage may cause overheating and shorten the service life of the device. Stop using the device if it is overheating. Do not use again until it becomes cool.
- Do not use on persons who suffer from heart diseases.
- Do not use on persons who suffer from acute diseases.
- Do not use on persons who suffer from osteoporosis or diabetes.
- Do not use on persons who have neurological disorders or perceptual disorders on skin.
- Do not use on persons with heart problems and wearing electronic medical devices such as pacemakers.
- Do not use on pregnant women or menstruating women.
- Do not use on persons that are wounded.
- Do not use on persons who have been instructed by a medical professional or people who are feeling unwell.
- Do not use on children under the age of 12 or persons without the ability to operate the machine.
- Do not use the machine when it is wet.
Overview
Operation
- When the device is off, short press
. The LED blue light will turn on and the device will be turned on and in low-speed mode.
- When the product is on, short press
to turn it off and the LED blue light will turn off.
- Short press
to change speeds; low speed, middle speed, high speed and auto 1, auto 2 and auto speed. If you long press, it will switch from auto 1 to auto 2 speed.
- When the device is on, short press
and it will go into middle speed and when you short press again, it will enter high speed mode.
- When you press power button
and speed button
together for 3 seconds, it will turn on ‘memory’ and will memorise the current speed. If you then turn the unit off and on, it will begin in the last speed it was set on, rather than the default low-speed. Long press the two buttons together for 3 seconds to clear memory speed.
- When the device is off, press the power button
and speed button
together for 3 seconds to activate the travel lock. This will avoid the device accidentally being powered on during transport. Press both buttons together for 3 seconds to disable the travel lock.
- LED light: It will shine when battery is Low. When fully charged, the blue light will be solid.
Note: This device cannot be used while charging.
Specifications
Rated Power |
5W |
Size(LxWxH) |
250 x 50 x 80mm |
Net Weight |
0.4kg |
Material |
Super quality Silicone+ABS |
Input |
~AC100-240V 50/60Hz |
Rated Voltage |
DC5V - 1.0A |
Timer |
5 minutes |
Troubleshooting
Fault |
Reason |
Method of exclusion |
The machine does not work |
Battery is low In travel lock mode |
Charge the device completely or turn off travel lock. |
Stops working |
No power or the 5-minute timer has elapsed. |
Charge the battery or restart the unit. |
Noise from massager |
Due to the motor in the unit, some noise is normal. |