Safety and Warnings
- When installing or replacing the batteries, always make sure to place them in the correct polarity. If they are installed incorrectly reversed, it will not work and will damage the circuit board.
- Do not mix different brands batteries or mix the old and new batteries together.
- Before using the camping flashlight, please check that the battery compartment has not loosened, otherwise the light may not function properly.
- When the light is dim, change the battery.
- Do not irradiate the eyes of others to avoid possible injury, especially children.
- Do not disassemble the product to avoid damage to the product.
- Do not use hard or volatile chemicals to clean the light, otherwise, it will damage the plastic parts.
- When not in use, turn off the camping lantern by completely collapsing the device.
- Do not place the product in high temperature or humid environment for extended periods whilst not in use.
- It is recommended that you remove batteries after using, in order to extend the life of the lantern.
Operation
 |
Rotate the base counter clock-wise to open the battery compartment lid. |
 |
Install 3*AA batteries or 1*18650 battery according to the positive and negative polarity marked on the battery compartment. |
 |
Secure the battery compartment lid and rotate clockwise to tighten it shut. |
 |
Adjust the height to control the amount of light, fully collapse will turn off the lantern. |
 |
Using the fold-away handles, pull the handles upwards of the lantern to turn it on. |
  |
|