Safety & Warnings
- Keep the product away from extreme heat or cold, as well as any flammable materials or damp places.
- DO NOT use under direct sunshine.
- DO NOT disassemble the product without professional instruction. It will void warranty coverage.
Overview
 |
1. Answer/Hang-up 2. Play/pause 3. Long-press one second to find FM mode |
 |
1. Next song 2. Listen to music mode, press once to increase the volume 3. Increase frequency in frequency modulation mode |
 |
1. Previous song 2. Listen to music mode, press once to decrease the volume 3. In frequency modulation mode, press once to decrease the frequency |
Operation
TIP: Before inserting the product into the cigarette lighter port, turn your car radio to an idle FM channel so that only quiet static is audible. When you adjust the FM transmitter to that frequency as instructed below, you will avoid loud static interference.
Instructions
Plug the FM transmitter into your vehicle's cigarette lighter port. The LED display will indicate the voltage of the car battery for 5 seconds. Then the device will enter wireless pairing mode and the LED screen will display “BT”. Follow the FM Frequency Tuning and Wireless Pairing instructions below. After these steps, you can answer phone calls and play audio through the transmitter.
FM Frequency Tuning
Tune your car radio to a blank FM frequency. Press and hold the “ ” button until the LED screen starts flashing. Press the previous/next button to change the output frequency on the transmitter to the same frequency the car radio is tuned to.
Wireless Pairing
Before the first use, you will need to pair your mobile phone with the transmitter. Turn Bluetooth on in your phone’s settings and scan for devices. Select and pair the transmitter with your phone. If you are prompted for a password, enter “0000”.
Answering Phone Call
- Press to answer an incoming call.
- Press to disconnect a call.
- Press twice to redial the last number.
- Long press to reject an incoming call in wireless hands-free mode.
Note: When making a call, you can only enter the number using your mobile phone.
Playing Music
- Either play music using your favourite app on your phone or insert a USB flash drive containing mp3 files into the USB port on the FM transmitter: if a USB flash drive is connected, it will play music automatically. To play from your phone with USB flash drive connected, reconnect over Bluetooth and start music playback.
- Press to play.
- Press during playback to pause.
- Press to skip to the next track.
- Press to skip to the previous track.
- Long press to raise volume.
- Long press to lower volume.
- When there is an incoming call during music playback,the unit will automatically switch to hands-free mode.
USB Ports
- The port with the QC3.0 logo supports Qualcomm QC3.0 fast charging at DC3.5-6.5V/3A, 6.5-9V/2A and 9-12V/1.5A.
- The port with the music logo supports 5V/1Acharging and drives up to 64GB (FAT format).
Specifications
|
Wireless version |
ATS2815 V4.2 |
|
Support agreement |
A2DP, AVRCP, HFP, HSP |
|
Frequency range |
87.5~108.0MHz |
|
FM transmission distance |
About 3M |
|
Product Input |
DC12-24V |
|
Output |
QC3.0 Fast charging |
|
Music format |
MP3, WMA, WAV |
|
USB |
64GB (Max. Capacity) |
|
Product weight |
37g |
|
Low power alert |
Flashing Under 12V |
|
Material |
ABS+High-end Anodic Aluminium Oxide (AAO) |
In the Box
- 1 x FM transmitter
- 1 x User Guide