Install the Application
Download the “Kogan Smarter Home” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan Smarter Home account, register or sign in with a verification code sent by SMS.
To register
- Tap to enter registration page.
- The system automatically recognizes your country/area. You can also select your country code manually. Enter your mobile phone number/ email address and tap “Next”.
- If you choose the mobile phone number option, then enter the verification code in the message sent to you by SMS. Set a password as prompted and press “Confirm” to finish your registration.
Create a profile on the next page to define your location and room.
Add Device through Network
1. Power the SmarterHome device on and follow the product-specific instructions to enter the Wi-Fi-connect mode.
2. Open Kogan SmarterHome app and tap "+" in the upper right to add a new device through the network.
3. Select the type of device you want to connect to on the next screen.
4. Ensure the device’s indicator light rapidly flashes and tap "Confirm light is rapidly flashing".
5. Select Wi-Fi network (note: network must be 2.4Ghz band) and enter the password. The device will commence the pairing process and connect to the app.
6. After successfully configuring the devices, the device will be shown on the home page. Tap to enter its control page.
Overview
Installation
Battery Installation
|
Warning: When installing the batteries into your product, check that the polarity of the battery matches the polarity marked on the contacts. The "+" indicator on the battery should be facing the "+" on the metal contact of the product. If the batteries are installed incorrectly, it could cause serious damage to your product. |
- Open the cover at the bottom of the camera.
- Insert the batteries in the correct polarity as shown below.
Wall Mounting
1. Fix the bracket on the wall
2. Install rubber
Note: Remove the rubber before resetting
3. Side the Camera slowly into the bracket in the direction of the arrow
4. Adjust the camera's proper angle.
Operations
Remote wake-up
The camera will be in sleep mode to save power, you can preview the camera in the Smarter Home app.
Full-duplex audio
You can see and hear the visitor from the camera in your Smarter Home app.
PIR (Passive Infrared)
When the camera detects someone stopping by, it sends an alarm message to your mobile phone.
Low battery alarm
You can set a low-battery alarm threshold in the Smarter Home app. The threshold is set to a minimum of 10% and a maximum of 50%. When the battery power of the camera is lower than the set threshold, the app will have a reminder.
Record
Use a micro SD card to keep recording for every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Specifications
|
Power Port |
DC 5V 310% |
|
Power |
Press the button for 3 seconds to turn the camera on or off. |
|
Status Light |
|
|
Microphone |
Capture sound for your video |
|
SD card slot |
Support local SD Card storage (Max.128GB) |
|
Reset |
Press and hold on for 5 seconds with pin to reset the camera |
In the Box
 |
 |
 |
| Security Camera | Power Adapter | USB Cable |
 |
Ax2 Bx2 |
 |
| Security Camera | Screw (2 kinds) | Rubber x 2 |
 |
||
| Pin | ||
