Safety & Warnings
- This device has dual charging ports, USB1: 5V/1A, USB2: QC3.0.
- Although the Bluetooth transmitter emits a strong signal, it is best not to have it use a frequency close to a local station for better sound quality.
- Due to the differences between each phone, there will be some small differences during Bluetooth connection.
- Some phones require that the Bluetooth connection is manually re-established when the power is turned off.
- This product is compatible with more than 95% of phones, however, there are still some that are incompatible. Please ensure this product will be suitable for your phone before purchasing this product.
- Do not increase the volume of your radio too much, so as to decrease any unwanted distortion or damage to your speakers.
- Do not use this product in a dusty and humid environment with extremely high or low temperatures.
- Do not drop or impact the product.
- The Bluetooth of this device supports background play. If there is a prompt tone when playing music with the TF card function, it will be automatically switched to the Bluetooth mode. After finishing the call, it will return to TF card playback automatically.
Overview
|
1 |
1.4" LCD screen |
|
2 |
TF card slot |
|
3 |
Mic |
|
4 |
Multifunctional button: Short press for pause/play/answer/hang up a call. Double click for redial. Rotate left and right to adjust volume, long press to switch mode (Bluetooth, TF) |
|
5 |
Short press to play the last song, Long press to increase FM frequency |
|
6 |
Short press to play next song, Long press to decrease FM frequency |
|
7 |
Switch ON/OFF |
|
8 |
Power adaptor |
|
9 |
USB 1: Charging port Maximum 5V/1A with charging recognition |
|
10 |
USB 2: QC3.0 quick charge |
|
11 |
Air vent holder |
Operation
The product is designed as both a car charger and Bluetooth FM Transmitter.
It uses a high-performance Bluetooth chip 4.1 + EDR, and a built-in MP3/WMA decoder to play music from a TF card.
It can play smartphone music by connecting via Bluetooth. The transmitter will switch to hands-free mode automatically when music is playing and you receive a call and will switch back to music when the call is over.
The device also provides hands-free calling via Bluetooth and allows the charging of your smartphone and tablet PC.
Bluetooth Mode
Insert the device into the cigarette plug in your car and fix the display onto the air conditioner vent. Turn on the power switch after power is connected. The transmitter will automatically start. The LCD shows FM frequency and battery voltage. Adjust the frequency of the cars radio to the transmitting frequency of the product.
In the Bluetooth pairing section of your phone, search for the name “CAR_KIT”. Click to connect, and after the connection is completed, the display screen will show that Bluetooth is connected.
Play music on your phone, through Bluetooth. Use the mode button to pause, play and adjust the volume.
Short press the knob button to answer/hang up a call, long press to reject a call. Double click to redial, long-press the mode button to switch to private answering during call time.
Note: You can only redial the last number you dialled.
TF Card Play
Insert a TF card into the TF card slot. The transmitter will automatically switch to TF card mode and play the music on the TF card. Single-click the knob button to pause/play, and use the FM button to switch to the next/previous song.
Frequency Adjustment and Setting
After turning on the product, long-press prev. button to enter FM frequency quick adjustment, short press for slow adjustment. Long press the next button to enter FM quick decrease adjustment, short press for slow adjustment.
When TF card music is paused, short press the prev. button to set the play mode: All repeat, single repeat, menu repeat, normal, random and browse play.
Short press the next button to set sound effects: Nature, Pop, Rock, Jazz, Classic and Country.
Switch Mode
When the device is connected via Bluetooth and has a TF card inserted at the same time, long-press the knob to switch modes.
Note: While switching mode and inserting an external device, the corresponding prompt on the display will show the current status of the device.
Charging Recognition
Plug a device which supports QC3.0 charging into the USB2 port.
It will automatically recognise the type of the device and use the maximum charging current that is safe for the device.
This device complies with QC3.0, QC2.0, FCP, PE, PE2.0, Apple, Samsung and BC1.2.
Power-off Memory
Every time you power off the product, the system will memorise information like the FM frequency and the song you were playing. When you use it next time, the song will continue playing.
When you remove or change the storage or the device is set to the wrong status, the device will play the first song.
Specifications
|
Rated working voltage |
12V-24V |
|
Limit working voltage |
8-32V |
|
USB1 output |
5V/1A charging recognition |
|
Working temperature |
-5-45deg |
|
USB2 |
Support QC3.0 charging phones |
|
Music format |
MP3/WMA |
|
Battery voltage display accuracy |
±1V |
|
SNR |
>60dB |
|
Degree of Distortion |
<0.1% |
|
Frequency Response |
20Hz-15kHz |
|
Left and Right Channel |
>60dB |
|
Bluetooth version |
Version4.1+EDR |
|
Bluetooth sound processing |
HFPV1.6, HSPV1.2, A2DP1.3, AVCTP1.4, AVDTP 1.3 and AVRCP 1.5 |
|
Bluetooth transmission distance |
<10m |
|
Effective distance of Bluetooth microphone |
0.5-2m |
|
FM Frequency |
87.5-108.0MHz |
|
FM Mode |
Stereo digital PLL frequency locking |
In the Box
- Vent Mounted Bluetooth FM Transmitter
- Operating Manual