Safety & Warnings
- Please check whether the applied voltage matches product specifications before connecting to power.
- Do not disassemble the unit.
- Do not handle the unit roughly.
- It is strictly prohibited to put the product into or near fire or heat sources source to avoid the risk of fire and explosion.
- To get a better result, reduce the brightness of the working area as much as possible to prevent the intervention of other light sources (e.g. bulbs, TV. etc.) and prevent strong wind (e.g. fan or air conditioner) from blowing straight to the product. It’s suggested to use it in a closed environment away from people.
- When the device is working, do not stare at the UV light for a long time to avoid eye injury. It is best to keep it a good distance away from you.
- Keep away from children while in use. Do not put fingers or metal objects into the device to avoid injury.
- If the power cord or grid is damaged, please contact after-sales team to get support.
- Please unplug the power plug and place it properly when not in use for a long time.
Overview
Operation
The Magnetic Mosquito Trap is an electrical mosquito trap, which is more powerful against mosquitoes than traditional traps.
It first attracts the mosquitoes with light and the airflow produced by the blower inhales the mosquito into the storage box when they get close enough. Inside the mosquito box, they are air-dried to death and an anti-escape net is added above the fan to make the unit difficult to escape.
How to use
- Connect to Power
Connect the USB cable to a power source such as power bank, laptop or another device with a powered USB output. - Turning On
Lift the lure ball upwards and the built-in magnet levitates and holds the ball, pulling the power switch to start the device. Both the lure light and built-in fan start working automatically. - Turning Off
Pull down the mosquito lure ball back to the power supply position. This will release the power switch and turn off the unit.
Tips for Best Results
- Keep the machine working continuously for no less than 12 hours. To prevent mosquitoes from escaping, please do not open the mosquito storage box frequently during operation.
- Close doors and windows while working. Before going to bed, turn on the mosquito trap about 3 hours in advance.
- Due to the method this unit uses to kill the mosquitoes, it will not kill them as quickly as a chemical product like a mosquito coil or similar item does. Please be patient.
Cleaning & Care
1. Cleaning the Storage Box
Rotate the bottom as shown above to unlock it. Replace the glue board, dump out the mosquitoes and clean it.
2. Cleaning the Fan Blades and Inside
Rotate the storage box as shown above to unlock it, then use the soft cloth and dilute neutral cleaner and wipe with a dry cloth.
Specifications
Voltage |
5V |
Rated power |
5W |
Net weight |
0.33kg |
Gross weight |
0.48kg |
Product diameter |
127.2 x 124.7 x 202.5mm |
Package size |
128 x 128 x 228mm |
Wavelength |
365nm-395nm (UV-A) |
In the Box
- USB Cable
- Mosquito Trap
- Instruction Manual