Safety & Warnings
Caution:
AC ~90-250V power connection.
Disconnect the power supply before the operation. Use your home circuit breaker to switch off the power. This protects you and your camera.
Overview
|
Power |
AC ~90-250V |
|
Status light |
Solid red light: The camera network is abnormal |
|
Blinking red light: Awaiting Wi-Fi connection |
|
|
Solid blue light: Camera running correctly |
|
|
Blinking blue light: Currently connecting to the microphone |
|
|
Microphone |
Captures sounds for your video |
|
SD card slot |
Supports local SD Card storage (Maximum 128GB) |
|
Reset |
Press and hold the ‘reset’ button for 5 seconds to reset the device (if you have modified settings, they will return to factory defaults) |
|
Light |
Turn the light on/off manually or automatically |
Install the Application
Download the “Kogan Smarter Home” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan Smarter Home account, register or sign in with a verification code sent by SMS.
To register:
- Tap to enter registration page.
- The system automatically recognises your country/area. You can also select your country code manually. Enter your mobile phone number/ email address and tap “Next”.
- If you choose the mobile phone number option, then enter the verification code in the message sent to you by SMS. Set a password as prompted and press “Confirm” to finish your registration.
Add Device Through Network
-
Power the SmarterHome device on and follow the product-specific instructions to enter the Wi-Fi-connect mode.
-
Open Kogan SmarterHome app and tap “+” in the upper right to add a new device through the network.
-
Ensure the device’s indicator light rapidly flashes and tap “Confirm light is rapidly flashing”.
-
Select Wi-Fi network (note: network must be 2.4GHz band) and enter the password. The device will commence the pairing process and connect to the app.
-
After successfully configuring the devices, the device will be shown on the home page. Tap to enter its control page.
Note:
- When the device is online, it can be controlled.
- When the device is offline, it displays “Offline” and cannot be remotely powered on.
Installation
Note:
A. Fix the camera
B. Adjust the angle
C. Adjust the direction and fix the camera
Operation
Functions
Lighting control:
You can turn the light on or off with time settings or PIR.
Full-duplex audio:
You can see and hear the visitor in your App from the camera.
PIR:
When the camera detects someone stopping by, it sends an alarm message to your cell phone.
Record:
Use SD card or open the Cloud-Storage service, to keep recording for every moment.
Day and Night:
Powerful night vision means no interruptions, even in complete darkness
 |
 |
|
Day |
Night |
In the Box
Consult the checklist below for all components
|
|
|
|
Security Camera |
Bracket |
|
|
|
|
Bracket Screws |
Mounting Bracket |
|
|
|
|
Wire Nuts |
Pin |
 |
|
|
Screwdriver |
User Manual |
