Pestill Electric UV Light Mosquito & Bug Zapper - (PTELBUGZAPA) - Manual

Safety & Warnings

1. While using the product, please reduce the brightness of the environment as much as possible to prevent the intervention of other light sources (e.g. fluorescent light, TV and outside light) and prevent strong winds (e.g. electric fan or air conditioner) from blowing directly onto the product. For better performance, use in an enclosed environment with no bystanders.
2. When the device is working, do not look at the UV light for a long time and keep the UV light at a distance from your body. Looking at the UV light for too long can cause damage to eyesight.
3. While in operation, the device should out of the reach of children.
4. Do not put your finger or a metallic object into the item to avoid injury due to electric shock.
5. When the wire or the high voltage grid is damaged, please contact Kogan.com Support.
6. If the product is not used for a long time, please unplug it and keep it in a safe place.

Warning:

Do not wash the product with water as the high voltage electric grid may cause fire and injuries from electric shock.

Overview

Installation

1. Use three screws to fix the metal hanging board onto the wall (see Pic 1).
2. Insert the hangers (a) tightly into the slots (b) on the board.
3. Connect the power cord to a power supply.
4. Pull the string to switch on the zapper.
5. Pull the string again to switch off.
6. Organize the power cord at the back of the product (see the red arrows).

Tips for use

• Please operate the device for more than 48 hours during first use.
• Don’t open the storage tray during working time. Make sure the mosquitoes are dried to death.
• Please keep windows and doors closed during use. Turn on the zapper 3 hours before you go inside the room to sleep.

Cleaning & Care

Cleaning the front section: Unscrew the three screws on the back and take off the cover to clean (see Pic 3).

Clean the storage tray: Pull out the tray (see Pic 4) and clean it.

Specifications

Troubleshooting