Kogan 40" Full HD LED TV (Series 7 GF7200) - ( KALED40GF7200GA) - Manual

Important Notes

• Always unplug the TV before cleaning or moving it.
• Do not allow children or pets near the TV.
• Never allow your TV to come into contact with water.
• Place the TV on an even level surface.
• Place the TV away from any sources of heat or vibrations.
• Make sure there is enough space around the TV for airflow, do not rest items on the TV.
• Clean using a dry microfiber cloth only - do not use water or chemicals.

Please be sure to thoroughly read all of the Safety and Warnings for this TV, at the end of this manual.

In the Box

 

TV Set	Remote Control with Batteries	User’s Manual	Base Stand	4 Screws

 

Installation

 

Wall Mounting

The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT INCLUDED). The VESA mounting pattern is 200 x 200mm. Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4 x M6 x10 isometric threaded screws (not supplied). Do not use screws longer than 10 mm; damage will occur to the internal components.

Caution: Your new TV is heavy; please consult with a professional wall mount installer to perform this installation.

 

Overview

 

Button Functions

1. POWER: Turn on TV/Standby
2. SOURCE: Audio/Video input source selection
3. MENU: Open settings menu
4. VOL-: Decrease volume
5. VOL+: Increase volume
6. CH-: Previous channel
7. CH+: Next channel
8. IR RECEIVER: Receives infrared signals from the remote control
9. INDICATOR LED: Status indicator

 

1. Headphone
2. USB
3. AUDIO IN L/R: Stereo audio input
4. COAXIAL
5. YPbPr: Connect to the YPbPr video output terminal of the DVD
6. VIDEO
7. RF: Antenna connection
8. PC AUDIO: Connect it to the audio output terminal of the PC
9. VGA: PC video input
10. HDMI

Connecting external devices to your LED TV

Remote Control

1. POWER: Turn on the TV/Standby.
2. AUDIO: Switch the audio channel when DVD or multimedia playing.
   I/II: Whilst watching DTV, press this button to select stereo mode.
3. SLEEP: Auto Power Off Timer.
4. SUB: Select subtitle if applicable (the disk or file must support subtitles).
5. FAV: Show the list of favourite channels.
6. NUMBER KEYS: Change the channel directly.
7. DTV/RADIO: In DTV mode, press DTV/RADIO button to enter DTV or RADIO mode.
8. : Return to the previous channel tuned.
9. MUTE: Mute or restore the sound.
10. VOL: Increase and decrease in volume.
11. CH: Change the channel.
12. REPEAT: Repeat mode.
13. INFO: Show information about the current program.
14. SOURCE: Press to change the signal source.
15. NAVIGATION KEYS (Up, Down, Left, Right and OK): To move in the menus and confirm settings.
16. MENU: Display menu page.
17. EXIT: Exit the Menu.
18. P.SIZE: Press to select a different picture size.
    : Displays the main index in Teletext mode.
19. GUIDE: Show the Electronic Program Guide.
    : Reveals hidden information such as the answers to a quiz in TELETEXT mode.
20. S.MODE: Setting audio options.
    : Freeze a multi-page changing on Teletext mode.
21. P.MODE: Output image mode selection.
    : Displays the top, bottom or all of page.
22. : Play/Pause.
    TS: In DTV mode, press TS button to start the delay function, press the  button to delay the program, press the  button to terminate the delay functions.
23. : Stop playback.
24. TXT: Turns on and off the Teletext function.
25. REC/ : In DTV mode , press REC button to start recording, press  Button to stop recording.
26. : Previous file or chapter.
27. : Next file or chapter.
28. : Fast forward playback.
29. : Fast rewind playback.
    Press the appropriate colour to direct access functions in TELETEXT or EPG OSD mode.

Installing the Batteries

If the remote control fails to operate the TV functions, replace the batteries in the remote control.

1. Open the battery cover.
2. Insert two size-AAA batteries. (Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery )
3. Replace the cover.

 

Operation

1. Connect your TV on the power outlet;
2. Press the POWER button on the remote to turn on the TV in green for the LED light.
   Caution: Always disconnect the TV from the power outlet when the TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.
3. Press the ▼/▲ keys and follow the on-screen prompts shown below.

Note:
The picture is for reference only.

First Time Installation

 

This menu will show the first time you install this TV.

Language：Press to change the OSD language.
Country: Press  to change the country.

After configuring the menu, press “OK” to start auto-tuning or press exit to exit the menu.

 

Input Source

Press SOURCE to show input source list. Press ▲/▼ to select and OK to confirm.
The menu will be automatically hidden in a few seconds, or press EXIT to clear the on-screen menu.

 

Channel Menu

The channel menu is available only in Satellite, DTV and ATV mode. Press MENU to display this menu default if you want to display another menu, press  to select.

Channel menu in ATV

Channel menu in DTV

 

Auto Tuning

Auto Tuning can find all strong signal strength channels automatically.

Press ▲/▼ to select Auto Tuning, then press “OK” to configure the Tuning Setup menu.

Press ▲/▼ to select and press  to change the setting or tuning, and then press “OK” to start tuning.

If you want to stop searching, press EXIT, and press  to confirm or  to cancel.

 

ATV Manual Tuning ATV

ATV Manual Tuning will pause when a channel is found. Press  to search down from the current frequency, and press  to search up

DTV Manual Tuning DTV

Press to decrease or increase the current frequency. When the TV finds a signal on the selected frequency, the menu will show the strength of signal on the bar.
When the TV finds a signal on the selected frequency, press “OK” to search all channel in current frequency.

 

Programme Edit

There are four shortcut keys for programming the channel.

First press ▼/▲ to highlight the channel, then:

• Delete: Delete the channel.
• Rename: Rename the channel (only show when the input source is ATV)
• Move: Set the channel to moving state then press ▼/▲ to move it to the position you want.
• Skip: Skip the selected channel. (your TV set will skip the channel automatically when using CH+/-.)
• ENTER: Press “OK” button to display the channel focus.
• Favourite: Press “FAV” to set favorite channel.
• Back: Press the MENU button to return to the previous menu

 

Picture Menu

Press MENU to display the main menu, and press to select the Picture Menu. Highlight the item and press ▼/▲ to select the corresponding sub-menu.

• Picture Mode: Dynamic/Standard/Mild/Personal. Contrast/Brightness/Colour/Hue/Sharpness.
• Colour Temperature: Select the colour temperature that you prefer.
• Noise Reduction: You can reduce the noise of the signal by setting the noise reduction (can’t be used when input source is PC).
• HDMI MODE: Press to select Auto/Video/PC mode (only used when the input source is HDMI).

 

Sound Menu

Press MENU to display the main menu, and press to select the Sound Menu.

• Sound Mode: Standard /Movie/Music/Sports/Personal.
• Treble: Treble adjust
• Bass: Bass adjust
• Balance: Adjust the level of sound from the left and right speakers.
• Auto Volume: When turned on, quick volume changes will be smoothed.
• SPDIF MODE: Press to select SPDIF mode, off/PCM/auto.
• AD Switch: Press to select audio.

 

Time Menu

Press MENU to display the main menu, and press to select the Time Menu.

• Clock: Sets the system time.
• Time Zone: Select the time zone.
• Sleep Timer: Select the time in minutes (10min, 20min, 30min, 60min, 90min, 120min,180min,240min) that you want the TV to shut off automatically after you set the time. Turn the setting off to cancel the setting.
• Auto standby: Select the time in hours（3H/4H/5H）that you want the TV to shut off automatically. Set off to cancel the setting.
• OSD Timer: Set display time of OSD (5s, 15s, 30s).

 

Lock Menu

Press MENU to display the main menu, and press  to select the Lock Menu.

• System Lock: System lock switch.
• Set Password: Set a password lock.
• Block Program: Lock the channel.
• Parental Guidance: Choose the Parental Guidance level.
• Key lock: Lock or unlock the key.

 

Option Menu

Press MENU to display the main menu, and press to select the Option Menu.

• Language: Set the OSD display language.
• TT language: Set the image-text language.
• Audio Languages/Subtitle Language: Press to change language or subtitles.
• Hearing Impaired: Press to set the Hearing Impaired to “on” or “off”.
• PVR File System: Set the recording file system.
• Aspect Ratio: Set the aspect ratio Auto/4:3/16:9/Zoom1/Zoom2.
• Blue screen: Enable blue screen.
• First Time Installation: Press “ “or “OK” to enter relevant options including OSD Language, Country and Environment.
• Reset: Recall the default setting.
• Software Update (USB): Upgrade the software.
• HDMI CEC: Press to select HDMI CEC/HDMI ARC/Auto Standby/Auto TV on/ Device List/Device menu.
• Environment: Press to select or to choose home mode or shop mode.
  

 

Screen Menu

Press MENU to display the main menu, and press to select the SCREEN Menu (This menu only shows when the input source is PC and has a signal).

• Auto Adjust: Adjust the screen automatically.
• Horizontal Pos.: Set the Horizontal Position.
• Vertical Pos: Set the Vertical Position.
• Size: Zoom in or zoom out the image horizontally.
• Phase: Set the phase.
• Position Reset: Reset Horizontal Pos, Vertical Pos and Size.

 

Media

The colour of the icon indicates whether your TV has detected a USB memory or not.

• Blue: Yes.
• Gray: No.

Press to select Photo/Music/Movie/Text icon and press “OK” to enter the USB memory.

 

Photo

Select a picture file and press “OK” to view, and it will display all the pictures in the folder automatically. Press “OK” to display the following menu.

• Play: Press to play/pause the slideshow.
• Next/Prev.: Press “NEXT/PREV.” button to skip to view the photo which is select the photo.
• Stop: Press the “STOP” button to stop and return.
• Repeat ALL: Press “OK” to select the repeat mode: Repeat 1/ALL/None.
• Music Off: Press to play or stop the background music.
• Playlist: Press to view the list of pictures.
• Info: Press to display the information of the current picture (Resolution/Size/Date/Time).

 

• Rotate: Rotate the picture.
• Zoom In: Zoom the picture in.
• Zoom Out: Zoom the picture out.
• Move View: Zoom out the picture first, Highlight the icon and press “OK”, then press
  ▼/▲& to move the picture.

 

Music

Press “OK” to display the menu.

• Play/Pause: Press to play or stop.
• FB: Press to play in reverse.
• FF: Press to play faster.
• Prev.: Press to play the previous song.
• Next: Press to play the next song.
• Stop: Press to stop and return to folder interface.
• Repeat: ALL Press to select the repeat mode: Repeat 1/ALL/None.
• Set AB: Set AB mode.

 

• MUTE: Turn mute on or off.
• Playlist: Select “playlist” to display the playlist.
• Info. : Select “info” to display the music information.
• Goto Time: Select “goto time” to go to a specific time.

 

Movie

Press “OK” to display the menu.

• Play/Pause: Press to play or stop.
• FB: Press to play in reverse.
• FF: Press to play faster.
• Prev.: Press to play previous movie.
• Next: Press to play next movie.
• Stop: Press to stop and back to folder interface.
• CharSet: Press to select charset.
• Repeat ALL: Press to select the repeat mode: Repeat 1/ALL/None.

 

• Set AB: Set AB mode.
• Playlist: Press to view the list of pictures.
• Info. : Press to display the information of the current movie.
• Slow: Slow forward.
• Step: Step forward .
• Goto Time: Select “goto time” to setup play time.
• Zoom In: Zoom the movie in.
• Zoom Out: Zoom the movie out.
• Aspect Ratio: Set the aspect ratio, Auto/4:3/16:9/Zoom1/Zoom2.
• Move View: Zoom in the picture first. Highlight the icon and press “OK”, then press▼/▲&  to move the movie.

Text

• Previous Page: Press to the previous page.
• Next Page: Press to the next page.
• Prev.: Press to play previous text.
• Next: Press to play the next text.
• Stop: Press to stop and back to folder interface.
• CharSet: Press to select charset.
• Music On/Off: Press to play or stop the background music.
• Playlist: Press to view the list of texts.
• Info.: Press to display the information of the current movie

 

Troubleshooting

If you experience any issues with your TV, please attempt the appropriate troubleshooting below. If you require any assistance, please feel free to contact our Support Team via your Kogan.com account.

 

SYMPTOM	POSSIBLE CAUSE	REMEDY
TV – No signal input connected, loose or disconnected.	Signal cable is loose or not connected.	Ensure signal cable is not loose or disconnected. Unplug completely and reinsert the cable and try again.
Remote Control The remote does not work, even at close range.	Receiver of the TV is covered, or IR transmitter of the remote is covered.	Ensure there is a clear line of sight between your remote and the TV, and there is no removable plastic or tape on either device.
	The battery is low.	Change the batteries.
TV The display is faint.	Adjustment is incorrect.	Use auto-adjustment function.
	Display mode is incorrect.	Use recommended mode.
TV Display image does not fill the screen.	Adjustment is incorrect.	Use auto-adjustment function.
		Enter PICTURE to adjust the horizontal and vertical position.
	Display mode is incorrect.	Use recommended mode.
TV Unable to operate the TV	Lighting, static electricity and so on, may affect the normal operation of the TV.	Press the  button to tum off electrical source, then press  the  button to turn on the TV again after 1-2 minutes.
Static and sound noise.	The antenna cable connector is loose, or the cable is damaged.	Check the antenna cable connector plug for secure connection and any damage.
	Antenna cable type is not correct.	Check antenna cable type (VHF/ UHF).
	Direction or position of the antenna is incorrect.	Adjust the direction or position of antenna.
	Signal is weak.	Attempt to use signal amplifier.
TV image is better, but has noise.	Antenna cable connector is loose, cable is damaged.	Check the antenna cable connector plug for a secure connection and any damage.
No image. No sound.	The power plug is loose, or the power cord does not connect well.	Check to ensure power cord is connected.
		Press POWER on panel or remote control.
		Check if the  button is on.
TV image has stripes.	The signal is exposed to interference, such as a car, neon light, electric blower, etc.	Do not use an electric blower around unit.
		Adjust antenna cable direction to reduce interference.
TV image has shadows.	TV signal is reflected by valley or building.	Use a high-directional antenna.
	The direction of antenna is incorrect.	Adjust the direction of the antenna.
TV has no sound.	The volume setting is too low.	Adjust volume to the proper level.
	Sound is muted.	Press MUTE to deactivate mute.

Caution: Do not allow your TV screen to display the same image for an extended period of time. Please implement a screen protection schedule of changing the image regularly. If a high-contrast picture remains on the TV screen for a long time, this picture could burn the image onto the screen. Usually, the burnt image will disappear gradually when you turn off the TV’s power. However, this damage cannot be repaired.

 

Specifications

TV System	DVB -T+C
Maximum	1920x1080
Brightness	200 cd/m2
Static Contrast	5000:1
Response Time	8.5ms
Consumption	75W
Power Supply	AC 100-240V- 50/60Hz
Connectivity	Composite Video Input Component Video Input PC Video Input (VGA) PC Audio Input HDMl input RF Antenna Input Headphones Output COAXIAL
Data Interface	USB
Supported System Files	FAT32 and FAT16

 

Multimedia Playback Format

Multimedia Categories	File Extension
Video	.avi/.mp4/.ts/.mkv/.mov/.mpg/.dat
Music	.mp3/.m4a/.aac
Photo	.jpg/.bmp/.png
Text	.txt

 

Remote Control

Signal Type	Infrared
Control Distance	8 meters
Control Angle	30° (Horizontal)
Power Supply	AAA 1.5V x 2

 

Safety and Warnings

Handle with care and inspect regularly to ensure the product is in good working order. If this product, power supply cord or plug shows any signs of damage: stop use, unplug the product and contact Kogan.com support.

 

A .pdf version of this manual is unavailable, however, you can print out this webpage if you would prefer a hardcopy. If you require any assistance, please feel free to contact our Support Team via your Kogan.com account.