|
Please handle this product with care and inspect it regularly to ensure it is in good working order. If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support. |
Safety & Warnings
- Read all instructions before using the appliance and retain for reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not immerse the product in water or allow it to be exposed to heat, impact or water outside of the inner pot.
- Keep the appliance away from flammable substances.
- This appliance does not have any user-serviceable parts. If it suffers any damage or experiences any malfunction, contact the Kogan support team.
- Do not clean with any abrasive substances, especially the inner pot.
- Do not use the appliance unless the pot is fitted correctly and do not use while it empty.
Overview
Specifications
|
Voltage |
Frequency |
Power |
Capacity |
|
220-240V |
50Hz |
1000W |
6L |
Controls
|
Start Press this button for three seconds to start the programme. |
Cancel/Keep Warm Press to cancel the current setting in setting page. Keep pressing for 3 seconds to cancel the current programme during the cooking process. |
|
Menu Press to choose a programme. |
|
|
Preset Press to set the time before cooking if the selected programme has the “preset” function. |
Hour/Min Press to change the time between an hour and minute. Press for several seconds to enable or disable the sound when the appliance is on standby. |
|
Timer/Temp Press to adjust time and temperature. One press adjusts time; two adjusts temperature. |
+ / - Press to adjust time or temperature after pressing the “Time/Temperature” button. You can also press this button to select a cooking programme. |
Pressure-sealed Lid
When pressurised, the lid cannot be removed. Do not try and do so by force. If the cover needs to be opened, turn the appliance off and press the steam release button to ensure the steam is safely removed. Then rotate clockwise by the handle and lift. See below:
|
Release steam |
Lid closed |
Lid open |
Lift lid |
Before Use
Remove the inner pot and fill with food and water. Replace pot and turn to ensure good contact with the heating element. Always ensure the heating element and outer surface of the inner pot are clean.
Closing the Lid
Ensure the seal ring is well-positioned before closing the lid. Hold the handlebar and gently close the lid, rotate the lid anticlockwise to the limit. Make sure that the steam release valve is sealed after closing the lid. A sound will be heard and the appliance will enter standby mode.
Operation
Select a programme
- Power on the appliance: the appliance will sound and enter standby.
- Press the “MENU” button to select a cooking programme: press “+” or “-” to go back and forth when the appliance is on standby.
- Press “Start” for three seconds to start the selected programme.
Set Cooking Time
- Press the Menu button to select the cooking menu, then press “Timer/Temp” to enter cooking adjustment mode,
- Press “+” and “-” buttons to adjust pressure-holding time and temperature.
- Press “Start” for three seconds to start the selected programme.
(Temperature setting is available for some menus: press “Timer/Temp” twice to enter cooking time setting, once again to enter temperature setting.)
Keep Warm
- When cooking finishes, the appliance will automatically keep warm. The display will indicate the keep warm time in minutes.
- Press “Cancel/Keep Warm” for 3 seconds to keep warm during standby.
- Press “Cancel/Keep Warm” for 3 seconds to cancel the current programme during cooking. The appliance will enter standby.
- Press “Cancel/Keep Warm” to cancel the current setting enter mode.
- The maximum keep warm period is 24 hours. After 24 hours, the appliance will automatically enter standby.
Cooking Function: Rice
- Place rice in the inner pot and insert into the appliance.
- Use “Menu” to select frying mode, + and – buttons to set the Rice programme.
- Press “Start” for three seconds to start the selected programme.
Cooking Function: Frying
- Place food in the inner pot and insert into the appliance.
- Use “Menu” or + and – buttons to set mode, “Timer/Temp” to set the cooking time and temperature.
- Press “Start” for three seconds to start the selected programme.
Note: When the set temperature is reached, the appliance will sound and count down.
Cooking Temperatures
| Function | Preset temperature | Can the temperature be changed |
| Rice | 160℃ | NO |
| Pasta | 160℃ | NO |
| Cake | 125~145℃ | NO |
| Slow cook | 90~95℃ | NO |
| Fry | 160℃ | Yes(from 120-160℃, 5℃/step) |
| Soup | 160℃ | NO |
| Porridge | 160℃ | NO |
| Bean/Tendon | 160℃ | NO |
| Steam | 160℃ | NO |
| Meat | 160℃ | NO |
| Potato | 160℃ | NO |
| Crispy rice | 140 ~165 | NO |
| Fish | 160℃ | NO |
| Reheat | 100℃ | NO |
| Bake | 135-165℃ | NO |
| Beef/Lamb | 160℃ | NO |
Cleaning & Care
- Always inspect the pressure limiting valve before and after use to ensure it is not blocked.
- Clean the aluminium lid after use, including the valves.
- Empty and clean the water collector after use.
- Unplug the device before cleaning.
- Do not immerse the appliance in water to clean.
- Use a sponge or soft cloth
Troubleshooting
|
Issue |
Possible Cause |
Steps to Resolve |
|
The lid is hard to close |
• The float valve is stuck • The seal ring is not positioned well |
• Press float valve, e.g. with a chopstick • Reposition seal ring |
|
Lid is hard to open |
• Appliance is pressurised • Float valve has not disengaged |
• Press steam release |
|
Lid leaks |
• The seal ring is not positioned well • Food residue stuck on the seal ring |
• Reposition seal ring • Clean seal ring |
|
Float valve leaks |
• The seal ring is broken |
• Clean front valve seal ring • Change float valve seal ring |
|
Excessive steam from the valve |
• Pressure limiting valve is not positioned well |
• Reposition pressure limiting valve • Contact Kogan Support |
If the above steps do not resolve an issue you are facing, contact Kogan Support.
User manual is subject to change without notice. For the latest version of your user manual, please visit https://www.kogan.com/usermanuals/