Installation
Step 1
Insert one AA battery into the battery compartment in the right direction; turn on the switch at the bottom of the mouse.
Step 2
Remove USB receiver from the battery compartment at the bottom of the mouse and plug it into the USB port of your computer.
Step 3
Drivers should automatically install once the USB receiver is inserted to allow the mouse to work. This may take a few minutes to complete.
Once complete, the mouse should work as normal.
Buttons on the Left of the Mouse
Upper Button: Forward, e.g. while in an internet browser
Lower Button: Backward, e.g. while in an internet browser
DPI Button
By pressing the DPI button, you can adjust the sensitivity of the mouse, there are three adjustable DPI levels: 800/1200/1600.
Specifications
|
Connector |
1 x USB 2.0 |
|
Receiver |
Nano USB |
|
Suitability |
For Right-handers |
|
Power saving mode |
3 |
|
Buttons |
4 Standard Buttons, 1 Scroll Wheel and 1 DPI Button |
|
Sensitivity |
800/1200/1600 dpi |
|
Polling rate |
250Hz |
|
Bandwidth |
2.4GHz, operating range up to 20m |
|
Compatibility |
Plug & Play |
|
Battery |
1 x AA (included within the mouse) |
|
Dimensions (L x W x H) |
Mouse: ca. 111.3 x 76.0 x 71.4mm |
|
Weight |
Mouse: ca. 90g USB receiver: ca. 2g |
|
Mouse key life |
3 million |
|
Colour |
Black |
|
Step current |
|
|
Working current |
5mA |
|
Standby current |
0.1mA |
|
Dormancy current |
50nA |
|
No receiver state |
10-25nA |
|
System requirements |
IBM or compatible computer Windows: 2000/ME/XP(x64)/Vista/7/8/10 Mac OS X (10.4 or higher) Workable USB port |
|
Three different power saving modes |
Mode 1: ≈0.6±0.2mA Mode 2: 1min≈0.3±0.2mA Mode 3: 30min≈50±10nA |
Troubleshooting
- Check the battery. If it is drained replace it.
- Disconnect and reconnect the USB dongle to establish a new connection.
- Move to mouse closer to the receiver if it is out of optimum range.
In the Box
- Wireless Mouse with Nano Receiver
- AA Alkaline Battery
- User Manual