Operation
Unfolding
Unfold the lightbox by pulling forward from the edges.
Open the corners outwards to 90° (right angle).
Connect the three corners together with the magnet inside the corner.
Adjust as needed, hang up the background and connect to the power supply and you’re ready to take some photos.
Folding
Pull apart the studio from the top and bottom edges.
Fold the corners on the middle and one side in towards the centre. Lay the background inside for convenient storage.
Fold the sides with the corners folded in, then fold over the side with the corners out.
Push the loose corners into the gap between the two other sides.
Place it back into the packaging bag for storage.