Safety & Warnings
 |
Read Instructions carefully. Check no parts are missing. |
 |
Lay out all of the components on a soft surface as if you were preparing to do a jigsaw puzzle. |
 |
Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front |
 |
Separate and identify each component from the hardware pack and rest each one in its proper location before fastening. |
 |
DO NOT fully tighten screws (leave slightly loose). When the item is fully assembled tighten the screws - but do not overtighten. Do not use power tools as they may damage the material. |
 |
If glue is required DO NOT set until you are certain that the parts belong together. |
Overview
Assembly Instructions
In the Box
 |
 |
 |
 |
|
X 16 8 x 35mm |
X 16 | X 1 | X 4 |