Safety & Warnings
If you have a blood circulation disorder, blood diseases, or other physical medical condition, please consult a doctor regarding treatment and use. The measurement results of this watch are for reference only, and not to be used for any medical use or basis.
Caution
- Do not heavily impact the unit, including dropping or knocking on walls or tables.
- Do not allow the unit to contact benzene, thinner or other chemicals.
- Do not keep close to a strong magnetic field.
- Do not wear it during a shower and do not allow contact with water hotter than 35°C.
- Do not disassemble, repair or modify the unit yourself.
- Do not throw into fire, this can be an explosion risk.
Overview
Initial Set Up
When using this watch for the first time, please take out the main unit and charge it with the corresponding charger. While charging, the device will automatically switch on and the device will automatically update the time and date when a phone or device is connected.
The unit will likely not display accurate time and date information before this occurs.
When you press the touch button, the watch screen will light up and enter the clock interface by default.
Mobile Application
Go to the App Store (iOS) or Google Play Store (Android) and download and install the HitFit Pro App.
Necessary conditions for the hardware of mobile device:
- iOS 9.0 and higher or Android 5.0 and higher
- Supporting Bluetooth 4.0
Function Icons
|
Time and date
|
Daily activity
|
Heart rate
|
|
Blood pressure
|
Blood oxygen
|
Weather
|
|
Music control
|
Sports
|
Find
|
|
Stopwatch
|
Brightness
|
Shutdown
|
Click on the loop to switch between different pages.
Operation
Watch Functions
| Clock Display |     |
|
Daily activity
|
Displays the total number of steps, calorie consumption and distance travelled on the day. It can also be viewed in the app after connecting to the watch. |
|
Heart rate
|
Long press the button for 5 seconds while on this page and the icon will change dynamically. The light on the back of the watch will start flashing, indicating that the heart rate measurement will begin. When measuring, about 15 seconds later, the heart rate data will be updated in real-time, and after 40 seconds, the watch will stop the measurement automatically. The watch will then return to the home screen automatically. Note: during measurement, do not move and do not change the interface. |
|
Blood pressure
|
Long press the button for 5 seconds and the watch will start to measure blood pressure. After about 1 min, the watch will stop the measurement automatically and display results. The watch will then return to the home screen automatically. Note: during measurement, do not move and do not change the interface. |
|
Blood oxygen
|
Long press the button for 5 seconds and the watch will start to measure blood oxygen. Measuring will take about 15 seconds. After some time, the watch will stop measurement automatically and will then return to the home screen. Note: during measurement, do not move and do not change the interface. |
|
Sports
|
The sports function supports walking, running, cycling, swimming and tennis modes. |
|
Find phone
|
When you switch to this page, long-press the button and the phone connected via Bluetooth will ring, allowing you to locate it by sound. Note: make sure the Bluetooth is connected when you attempt to use this mode. |
|
Shutdown
|
Switch to this page, long-press the button for 5 seconds, then the watch will shut down. |
Personal Data Settings
After installing and opening the app, enter settings and click on the profile to enter the personal data settings page. The setting of personal information is consistent with the user, which will help to estimate your calorie consumption and blood pressure.
Pairing the Watch
- Turn on Bluetooth on the phone.
- Open the sidebar in the app then click Device, choose your device, the app will start to scan for the device. Click the pairing button to connect your watch and wait until it has connected successfully.
- If you are using an iPhone, when pairing a message will appear stating “Bluetooth Pairing Request”, please click “pair”.
Syncing Data
The watch automatically synchronizes the data after pairing/connecting with your smartphone. Data includes steps, calories, distance, date and time, heart rate and sports. Alternatively, you can manually synchronize data by click the floating button.
Sleep Monitor
To use this function, you need to wear the watch at night and the watch will analyse the quality of your sleep according to your nocturnal movements and monitor your entire sleep schedule.
Heart Rate/Blood pressure/Blood oxygen detection
Manual detection
enter the application and click "Synchronize" or "Measuring" in the health interface to begin measuring. The measurement process lasts 2 minutes. Since the app can't carry out measurements of heart rate, blood pressure and blood oxygen all at the same time, don’t switch the interface during measurement.
When the interface is switched, the watch will stop measuring. Figures below show the heart rate interface. The measurement of blood pressure, blood oxygen are similar processes.
Note: the watch must be worn to be able to measure these.
Calling and Message Alerts
After connecting the watch to your phone, enter the notification page to adjust which notifications can come through on the watch so that the watch will receive the message alerts, phone call alerts, and notifications from Facebook and other third-party apps.
Note: The notification settings in the phone (not the application) must still allow notifications for the application.
Sedentary Reminder
After connecting the watch to your phone, go to the notification page and turn on the sedentary reminder, setting the start time and end time of sedentary reminder period. If you are not active for 1 hour during this period, the watch will vibrate to remind you to get moving.
Drinking Reminder
After connecting the phone, enter the notification page to turn on the drinking reminder and set the times for the watch to remind you to drink some water.
Alarm Setting
After connecting to your phone, open the sidebar, click device then click alarm setting and add a new alarm. The watch will vibrate when it’s time for the alarm. The alarm clock can be set daily or for a specific day of the week and you can set up to 5 alarms.
Remote Camera Control
After connecting to your phone, open the sidebar, click device then click photo switch and turn on the phone camera. Switch to the camera function on the watch and long-press the button to take a photo. This can helpful for taking group photos.
GPS Motion Record in HitFit Pro
Your watch can help you track your exercise using your phones inbuilt GPS.
To do this, first, ensure your GPS is turned on, in the settings of your phone.
Click on a single dynamic view to view the detailed data records after saving locally at the end of the recording. Statistics show only the current data.
- Open the HitFit App, and click the sports icon on the top right corner:
-
Click Start:
-
Choose from one of the sport modes and then select start:
Sharing Strava Function
After you finished tracking GPS sport via the app and the watch's sports data is synchronised with the app, you can share the data to Strava using the Stava button in the app's menu.
When sharing data to Strava, your path and distance will be shared as well as some other information.
It will also allow you to see other people's paths for ideas on the best places to exercise.
You will need to create a Strava account if you do not have one already and log in, or log in using a different account such as Facebook or Google.
Tap "Share to Strava" to confirm, and after the prompt is successful, you can see the data you just shared on Strava.
Due to the limitations of Strava, if the data has been shared with Strava already, the synchronisation failure prompt will pop up as before.
After uploading, you can view the relevant data on Strava, as shown below. Since Strava's data and HitFit Pro's data are different algorithms, there will be some differences between the data.
Once Strava is authorised, it will use the account that was logged in by default the next time you want to share data. If you want to change your account or cancel authorisation, you need to go to the menu and click "Strava" to cancel this.
Specifications
| Waterproof level | IP68 rating |
| Battery | 160mAh |
| Connectivity | Bluetooth 4.0 |
| Charge time | 2 Hours |
| Working condition | 10°C~50°C |