Installation
Step 1
Open the battery case and power switch to “ON”.
Step 2
Insert the battery (pay attention to the positive and negative terminal).
Step 3
Remove the receiver.
Step 4
Insert the computer USB interface.
Inserting the receiver may prompt required drivers to download. Please allow a few minutes for this to complete before the mouse is able to be used.
Buttons on the Left of the Mouse
Upper button: Forward, e.g. next page in the internet browser
Lower button: Backward, e.g. in the internet browser
DPI Button
By pressing the DPI button you can adjust the sensitivity of the mouse, there are three adjustable DPI levels: 800/1200/1600.
Specifications
IBM or compatible computer
Windows: 2000/ME/XP(x64)/Vista/7/8/10
Mac OS X (More than V10.4)
Workable USB port
Mode 1: ≈0.5±0.2mA
Mode 2: 1min≈50µA
Mode 3: 30min≈30µA
Connector |
1 x USB 2.0 |
Receiver |
Nano USB |
Suitability |
For right-handers |
Power saving mode |
3 |
Buttons |
4 standard buttons, 1 scroll wheel and 1 DPI button |
Sensitivity |
800/1200/1600 dpi |
Polling rate |
250Hz |
Bandwidth |
2.4GHz, operating range up to 20m |
Compatibility |
Plug & Play |
Battery |
1 x AA (included within the mouse) |
Dimensions (L x W x H) |
Mouse: ca. 116.0 x 72.5 x 42mm |
Weight |
Mouse: ca. 72g |
Mouse key life |
5 million |
Colour |
Black |
Step Current |
|
Working current |
5mA |
Standby current |
0.1mA |
Dormancy current |
50µA |
No receiver state |
10-25µA |
System requirements |
IBM or compatible computer |
Three different power saving modes |
Mode 1: ≈0.5±0.2mA |
Troubleshooting
- Check the battery. If it is empty replace it.
- Disconnect and reconnect the USB dongle to establish a new connection.
- Move to mouse closer to the receiver if it is out of optimum range.
In the Box
- Wireless mouse
- Nano receiver
- AA alkaline battery
- User manual