Safety Warnings
To reduce the risk of electric shock, do not remove any covers (or backings). There are no user-serviceable parts are inside.
Caution
- Changes or modifications not expressly approved by Kogan.com could void the user's authority to operate the equipment.
- Do not attempt to modify this product in any way without written authorization from Kogan.com. Unauthorized modifications could void the user's authority to operate this product.
- To prevent fire or shock hazards, do not expose this product to rain or moisture.
- Keep a copy of these instructions handy for future reference
- Heed all warnings.
- Do not use this product near water.
- Clean only with a dry, soft cloth.
- Do not block any ventilation openings.
- Do not install near any heat sources such as radiators, stoves, ovens or other items that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs and where the cord exits the monitor itself.
- Use only with the stand supplied or with a mount recommended by Kogan.com.
- Unplug the monitor during lightning storms or when it will be unused for an extended period of time.
- Do not expose the monitor to dripping or splashing water, and ensure that no objects filled with liquids (such as a vase) are located near the monitor where it could tip and spill.
Product
What's in the Box
Please check that all of the following is supplied:
|
|
|
|
|
Monitor |
Stand |
Quick Start Guide |
Power Cord |
HDMI Cable |
Key Functions
Key |
Function |
1. MENU |
Show OSD menu/select function |
2. DOWN |
Move icon down/decrease value |
3. UP |
Move icon up/increase value |
4. EXIT |
Back to last menu/auto adjust |
5. |
Turn monitor ON/OFF |
Connections
- Connect the power cord for your monitor to the AC IN port on the back of the monitor.
- Plug the power cord for the monitor into a nearby outlet.
- Use a connection appropriate for your computer.
Stand/base Installation Guide
1. Pull out the monitor from carton box carefully.
2. Take out the stand & support column, connect the two parts.
3. Take out the connection block by pressing the detach button. (Keep the monitor in its protective foam).
4. Insert the Connection Block into the back cabinet then push down the stand until firmly connected.
5. Lift the monitor up straight and remove the foam.
6. Stand installation done.
Wall Mount Installation Guide
Wall Mounting
VESA 75*75mm wall mount.
Note: VESA mount or mounting accessory are not included.
1. Open the Box, take out the product with protection form attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to remove the stand plate. If the monitor was already attached to the stand, remove the stand.
2. Remove the original screws x4 ( below) from the opening in the back of the monitor.
3. Follow the directions with your mount and install the monitor on the wall or fixture as desired. Remember to use the included 4 screws when mounting the monitor. Refer to the image ( below) for correct screw placement.
Do not discard the original screws. These may be needed in the future.
4. Follow the directions with your mount, stand, or accessory and install the monitor on the wall or fixture as desired.
OSD
1. Brightness
1.1. Brightness adjustment (This option will adjust your display's brightness)
Use the up and down buttons to increase or decrease brightness setting.
1.2. Contrast adjustment
This option will adjust the amount of difference between white values and black values. Use the up and down buttons to increase or decrease contrast setting.
1.3. Black equalizer adjustment
Use the up and down buttons to increase or decrease black equalizer setting.
1.4. Low blue adjustment
Use the ON/OFF option to adjust the low blue function.
1.5. ECO adjustment
This option will allow you to choose STANDARD/GAME/MOVIE/TEXT/FPS/RTS mode.
1.6. DCR function (Dynamic Contrast Ratio)
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or down to select ON or OFF, press MENU to open or close DCR function.
2. Image
2.1. Horizontal position adjustment
This selection will adjust the horizontal position of the video on your display. This mode is only available in VGA mode. Use the up and down buttons to move your video display area left to right.
2. 2. Vertical position adjustment
This selection will adjust the vertical position of the video on your display. This mode is only available in VGA mode. Use the up and down buttons to move your video display area up and down.
2.3. Clock adjustment
Press up or down to adjust the clock.
2.4. Phase adjustment
Press up or down to adjust phase.
2.5. Aspect adjustment
Switch between screen sizes Wide (16:9), 4:3.
3. Color Temp
This selection will change the amounts of red, green, and blue present in the image. The warm mode will give a redder image, while cool mode will give a bluer image. User mode will allow you to make your own adjustments to the red, green and blue values.
4. OSD Setting
4.1. Language adjustment
This selection will allow you to select the language you want the menu to appear in.
4.2. OSD H-position adjustment
This selection will change the horizontal position of the On-Screen Display Menu. Use the up and down buttons to change the position left to right.
4.3. OSD V-position adjustment
This selection will change the vertical position of the On-Screen Display Menu. Use the up and down buttons to move the display up and down.
4.4. OSD Timer
This selection will adjust the OSD menu display time on the screen, from 5s to 60s.
4.5. Transparency
This selection will adjust OSD menu transparency on the screen. (0%/25%/50%/75%/100%)
5. Reset
5.1. Image Auto adjustment
This selection will automatically adjust your image settings for best viewing. This mode is only available in VGA mode.
5.2. Color Auto adjustment
This selection will automatically adjust your colour settings for best viewing. This mode is only available in VGA mode.
5.3. Reset
This selection will reset the monitor to factory statement.
5.4. Auto Power-down adjustment
Open this function, the display will set power off automatically after standby 60S.
5.5. Time count adjustment
This selection will adjust the timecount setting, 10min, 20min, 30min, 40min, 50min, 60min and 90min.
6. Misc
Signal source adjustment
Press UP or DOWN to select VGA or HDMI source.
Specifications
Compatible Resolutions
Standard |
Resolution |
H-Frequency (KHz) |
V-Frequency (Hz) |
Remark |
|
VGA
|
720 X 400 640 X 480 640 X 480 640 X 480 |
31. 47 31. 47 37. 50 37.861 |
70. 0 60. 0 75. 0 72. 8 |
|
|
SVGA |
800 X 600 800 X 600 800 X 600 |
37.879 48.077 46.875 |
60. 0 72. 2 75. 0 |
||
XVGA |
1024 X 768 1024 X 768 1024 X 768 |
48.363 56.476 60. 02 |
60. 0 70. 0 75. 0 |
||
SXVGA |
1280 X 1024 * 1280 X 1024 |
63. 981 79. 976 |
60. 0 75. 0 |
17/19 |
4:3 |
WXGA |
* 1360 X 768 |
47. 7 |
60. 0 |
15. 6/18.5 |
16:9 |
WXGA+ |
* 1440 X 900 |
55. 469 |
60. 0 |
17/19 |
16:10 |
WXGA+ |
* 1600 X 900 |
55. 906 |
60. 0 |
17.3/20 |
16:9 |
WSXGA+ |
* 1680 X 1050 |
64. 7 |
60. 0 |
22 |
16:10 |
WUXGA |
* 1920 X 1080 |
67- 2 |
60. 0 |
21.5/23 23. 6/24 |
16:9 |
Product Specifications
VGA Input |
Input interface |
D-SUB 15pin |
Input signal |
Analog 0.7pp anode signal/75amp |
|
HDMI Input |
Input interface |
19pin |
Input signal |
18Gbps |
|
H-Frequency |
30 - 80 Khz |
|
V-Frequency |
60 - 75 Hz |
|
Temp. |
Storage Temp Operation Temp |
-20°C to 60°C 0°C to 40°C |
Humidity |
Operation |
10% to 85% |
Input Power |
AC 100-240V 50/60Hz 1.1A |