Safety & Warnings
Handle with care and inspect regularly to ensure product is in good working order. If this product, power supply cord or plug shows any signs of damage: stop use, unplug the product and contact Kogan.com support. |
- Read all instructions before using and retain for reference.
- This device contains small parts is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety. This device is not suitable for children under 5 years of age.
- Do not put the device into fire or water, as this will destroy it and may pose an electrical hazard.
- Do not use in high-temperature or high-humidity environments
- Do not disassemble, squeeze or puncture the device.
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support.
- Fully charge the power bank once before first use.
- In order to ensure the durability of the battery during irregular use, charge and discharge the power bank once every three months.
- Charging by unsupervised, short circuit, or mechanical damage may cause overheating and fire risk.
- Handle with care. Any impacts, vibrations, or falls from a height may damage the product.
- Modifying or dismantling the product may pose a safety risk.
Included Parts
- Power bank
- User Manual
- USB Type-C Charging Cable
Specifications
Input Type C |
5V 15V |
Output Type C |
5V 15V |
Quick Charge 3.0 Output |
5V |
Total max output |
Type C: 60W (20V*3A) QC 3.0: 18W (12V*1.5A) Total Output Simultaneous: 60W (USB Type C ) + 15W (USB A) = 75 Watt Total |
Battery capacity |
26,800mAh / 3.6V / 96.5Wh |
Rated capacity |
14,000mAh / 5V (TYP 1A) |
Dimensions |
188 x 87.4 x 23.4 mm |
Weight |
Approx. 600g |
Product Diagram
- Please note, the adaptor is not included, it is intended for demonstration purposes only.
Operation
To charge the power bank
- Connect the included USB-C charging cable to a USB power supply such as an AC charger or computer USB port.
- The LEDs will blink while charging.
- When fully charged, all indicator LEDs will be illuminated.
To charge the other devices
- Connect a compatible USB cable from your device to the power bank and press the power button.
- Charging will commence once the power bank is powered on.
- LED status indicators for battery percentage are described in the diagram above.