Safety & Warnings
Please handle this product with care and inspect it regularly to ensure it is in good working order.
If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the power supply cord is damaged, it must be replaced by a Kogan.com technician or a similarly qualified person in order to avoid a hazard.
- Do not store explosive substances such as aerosol cans with flammable propellants inside.
- Unplug the appliance after use and before carrying out any user maintenance.
- Keep all ventilation openings clear of obstructions.
- Do not use mechanical devices or other means to accelerate the defrosting process.
- Do not use extension cords.
- The refrigerant and cyclopentane foaming material used in this appliance is flammable.
- When unplugging the appliance from the power outlet, grasp the plug and pull on it. Do not pull on the cord.
- Please use a dedicated power socket for this appliance. Do not share the outlet with other appliances via a power board or double adapter.
- Do not disassemble or attempt to repair the refrigerator yourself. Doing so will void the warranty. Kogan.com is not liable for an appliance that has been tampered with.
- The gaps between the refrigerator door and the cabinet are small. Do not put your hands in this area to avoid having your fingers pinched.
- Do not touch or move items from the freezer compartment with wet hands.
- Do not allow animals or pets to climb into or onto the refrigerator.
- Do not place heavy objects on top of the refrigerator.
- Unplug the unit from the power outlet in the event of a power failure or when cleaning. Avoid plugging the unit back in within the space of 5 minutes after unplugging to avoid damage to the compressor.
- The refrigerator should be used only for the storage of household foods and drinks. It is not designed for storage of blood, drugs or other biological products.
- Do not store beer, beverages or other fluids contained in bottles or enclosed containers in the freezer compartment of the refrigerator, as the bottles may crack due to the freezing process.
- When the refrigerator is being disposed of, the doors should be removed and the power cord should be cut.
Before use, remove all packaging materials, including bottom cushions, foam pads and tape from inside the refrigerator. Remove any protective films on the doors and body.
Place the refrigerator in a location away from heat and direct sunlight. Do not place the freezer in a moist or watery location to prevent rust.
Ensure the refrigerator is placed on a stable, flat surface. Make sure the unit cannot be rocked side to side, back and forth or diagonally.
Ensure there are at least 30cms of empty space above the top of the refrigerator, plus at least 10cm of space to each side to allow for the dissipation of heat.
The picture above is for reference only. The actual appearance of the fridge and feet may slightly differ, however, the function will remain the same.
- Turn the feet clockwise to raise the refrigerator.
- Turn the feet counter-clockwise to lower the refrigerator.
Swapping the Door
To swap the door sides, you will need the following tools.
|Phillips-head Screwdriver||Putty Knife + Flathead Screwdriver|
|5/16" Socket and Ratchet||Masking Tape|
Power off the refrigerator and remove all objects from the door trays.
1. Tape the door shut with masking tape.
Dismantle the upper hinge cover, screws and upper hinge, then remove the plastic screw hole caps from the other side.
2. Dismantle the door and the bottom hinge assembly and the adjustable foot, then assemble the bottom hinge assembly and adjustable foot on the other side.
3. Put the door on the bottom hinge and assemble the upper hinge, upper hinge cover and plastic screw hole caps successively.
- Before the initial start, keep the refrigerator still for half an hour before connecting it to a power supply.
- Before putting any fresh or frozen foods into the fridge, the fridge should be left to run for 2-3 hours, or if the temperature is especially high during summer, up to 4 hours.
- Ensure there is enough space left for the convenient opening of the drawers and doors.
Energy Saving Tips
- This appliance should be located in the coolest area of the room, away from heat sources and heating ducts, as well as away from direct sunlight.
- Let hot foods cool to room temperature before placing them in the refrigerator. Overloading the fridge forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the fridge. The will cut down on frost build-up.
- The storage bin should not be lined with aluminium foil, wax paper or paper towelling. These liners will interfere with the cold air circulation, making the appliance less efficient.
- Organise and label your food to reduce door openings and extended searches. Remove as many items as needed at one time, then close the door as soon as possible.
Structure & Functions
The picture above is for reference only. The actual layout may differ slightly.
- The refrigerator chamber is suitable for the storage of a variety of fruits, vegetables, beverages and other foods to be consumed in the short term.
- Cooked foods should not be put into the fridge until they have cooled to room temperature.
- Foods should be sealed up before being put into the fridge.
- The glass shelves can be adjusted up and down as desired to create suitable storage spaces.
Note: The storage of too much food after the initial connection to the power may adversely affect the freezing effect of the fridge. Foods stored must not block air outlets.
- Turn the temperature control knob to MAX, and the internal temperature will lower.
- Turn the temperature control knob to MIN, and the internal temperature will get higher.
Cleaning & Care
- Dust behind the refrigerator and on the ground should be cleaned to improve the cooling effect and improve energy efficiency. The interior of the refrigerator should be cleaned regularly to avoid odours. Soft towels or sponges dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freeze should be cleaned with clean water and a dry cloth. Open the doors and allow the unit to dry naturally before closing the doors and turning the power back on.
- Do not use hard brushes, steel wool, wire brushes, abrasives, organic solvents, boiling water, acids or alkaline items to clean the refrigerator.
- Unplug the power cord.
- Remove food and store it properly to avoid food spoilage.
- Clear the drain pipe.
- Place down trays to catch the water as the frost melts.
- You can let the freezer defrost using the natural temperature of the room.
- If there is a large amount of ice, an appropriate amount of hot water can be used to speed up the melting process.
- Once defrosted, close the fridge and plug the unit back into a power outlet.
- After a few hours, you are safe to return the food to the freezer.
Out of Operation
- Power Failure: in the event of a power failure, even in summer, the food inside the refrigerator will stay cool for several hours. While the power is out, ensure that the door is not opened and fresh food is not added to the fridge.
- Not in Use: in the event that you will not be using the fridge for an extended period of time, you should unplug the refrigerator from the power outlet and clean it thoroughly. The door should be kept open to prevent odours.
- Moving: Before the refrigerator is moved, you should remove all food objects. Then fix all glass partitions, vegetable holder, freezer drawers etc. with tape. Tighten the levelling feet, then close the doors and seal them with tape. While moving, the refrigerator must not be turned upside down or laid down.
To improve the longevity of the refrigerator, once it has been set up and turned on, it should be disrupted as little as possible. Starting the unit up and shutting it down or moving it, will both significantly shorten the life expectancy of the unit.
If you experience any issues, please check the table below before contacting our support team.
|Failed Operation||Check that the refrigerator is plugged in and the outlet is switched on.
Check whether there is a power failure or if your circuit breakers have tripped.
|Odour||Ensure that foods with strong scents are well wrapped.
Check whether there is any rotten food or liquids in the fridge.
Clean the inside of the refrigerator.
|The compressor is working for long periods||During summer, it is normal for the compressor to work harder due to the higher ambient temperature.
Ensure that food is allowed to cool down before it is placed inside the fridge.
Do not open the doors too frequently.
|Light not turning on||Check to see whether the fridge is plugged in and that the outlet is switched on.
Have the globe replaced.
|The door will not close||Check to see that the door isn’t being blocked by any packaging.
Check that the fridge isn't tilting.
|Loud noises||Check whether the fridge is stable and level.|
|Door seals aren't tight||Remove any foreign matter or liquids on the seals.
Heat the door seal with a hot towel or hairdryer, then close the fridge.
|Water pan overflowing||There is too much food in the freezer, resulting in heavy defrosting.
Doors aren't closing properly, resulting in over frosting.
|Fridge body is hot||Heat dissipation of the built-in condenser into the body is normal.|
|Surface condensation||Condensation on the exterior surface and door seals is normal when the ambient humidity is too high. It can be wiped away with a clean towel.|
|Abnormal noise||Buzzing and creaking from inside the body of the refrigerator is perfectly normal.
This is the sound of the compressor and the refrigerant flowing.