Safety & Warnings
Read all instructions before using the appliance and retain for reference.
1. Unplug the monitor before cleaning it with a slightly damp, clean cloth.
2. Wiping the screen once it has been turned off with a microfibre cloth is recommended.
3. Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
4. This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
5. Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
6. Do not insert any objects or spray any liquids into the vents.
7. Do not position the monitor in unsafe or unstable locations. If the monitor falls, it may be damaged and may injure nearby people.
8. Unplug the monitor if it is not going to be used for an extended period of time.
9. Do not place heavy objects on the monitor, its power cord or any connected cables.
10. Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
Overview
Monitor Controls
| 1. | Menu: Press to bring up the OSD menu and enter sub-menus | 4. | Exit: Press to exit the OSD menu |
| 2. | Down: Press to move down in menus | 5. | Power: Press to turn the monitor on or off |
| 3. | Up: Press to move up in menus | 6. | LED indicator: Shows status of the unit. See below for more information. |
Note: Button 4 (E) can also change colour gamuts when a compatible graphics card and HDMI/DP connection are in use.
Indicator Light
Solid blue/green/white light: Power is on and the monitor is operating normally.
Flashing blue light: No video source has been detected.
Red light: No signal detected, or insufficient power received: check computer/input is set to send video output to monitor and that all cables are fully inserted and secure.
Monitor Ports
| 7. | 3.5mm audio output to connect headphones or powered speakers | 10. | DVI input |
| 8. | Display Port input | 11. | Power input |
| 9. | HDMI input | ||
Connectivity
Power Cable
Connect the included power cable to the monitor, then plug the other end into an AC outlet.
3.5mm Audio Output
Connect a 3.5mm audio device such as headphones or externally-powered speakers.
Caution: Listing to loud audio for prolonged periods of time may permanently damage your hearing.
Display Port
Connect to this monitor from your compatible computer using a DisplayPort cable to receive a high-quality digital video signal.
HDMI
Connect to this monitor from your compatible computer using an HDMI cable to receive a high-quality digital video signal.
DVI
Connect to this monitor from your compatible computer using a DVI cable to receive a high-quality digital video signal.
Operation
Setup
1. For basic setup, connect the monitor to your PC using your preferred connection (HDMI, DVI or DP).
2. Connect the cable to the corresponding connector on your monitor as outlines in the connectivity section of this user guide.
3. Connect the power cable as outlined in the Connectivity section of this user guide.
4. Press the power button on your monitor to turn it on.
OSD Menu
The On-Screen Display (OSD) menu can be used to adjust your monitor's settings.
When first connecting the monitor to your PC, settings will adjust automatically based on the configuration of your PC.
1. Press any button to activate the navigation window.
2. Press M to enter the OSD screen.
3. Press Up or Down to browse functions and change. Press M to enter the sub-menu for the highlighted option. Press E to exit the current menu/screen.
List of Functions
| Main Menu | Sub-Menu | Options | Description |
| Brightness/Contrast | Brightness | 0-100 | Adjust display brightness |
| Contrast | 0-100 | Adjust display contrast | |
| ECO | Standard, Game, RTS, FPS, Movie, Text | Set the ECO mode | |
| DCR | ON | Turn DCR function on | |
| OFF | Turn DCR function off | ||
| Image | Aspect | Wide, Auto, 4:3 | Set display aspect ratio |
| Colour Temperature | Colour temperature | Warm, Cool, User | Set the display colour temperature mode |
| Red | 0-50 | Set custom colour values | |
| Green | 0-50 | ||
| Blue | 0-50 | ||
| OSD Setting | Language | English,  ,  , Español, Français, Deutsch |
Set OSD language |
| OSD H-Position | 0-100 | Adjust OSD horizontal position | |
| OSD V-Position | 0-100 | Adjust OSD vertical position | |
| Transparency | 0-100 | Set OSD transparency | |
| Time Out | 0-60 | Set OSD timeout in seconds | |
| Reset | Reset | N/A | Restore factory defaults |
| Misc. | Signal Source | HDMI, DVI, DP | Select display input |
| Low Blue Light | 0-100 | Set blue light filtering option | |
| Overdriver | Off, Low, Middle, High | Set the Overdriver function | |
| LED Effect | Normal, Off, Flicker | - |
Gameplus
Press the up button in the OSD settings to toggle on-screen center icons for FPS games and other scenarios.
Troubleshooting
| Issue | Possible cause/steps to resolve |
| Screen is blank | Ensure power has been connected and turned on, and the power button has been pressed |
| Check brightness/contrast | |
| Check indicator light; if flashing, no video signal is being received | |
| Check display settings for connected device | |
| Image out of focus | Check video cable connection |
| Screen flashing | Check video cable connection |
| Ensure devices which could cause a magnetic disturbance (unshielded speakers, fluorescent lighting, AC transformers, etc.) are a safe distance away | |
| Issue with power source; contact Kogan.com Support | |
| Colour bleeding, distortion or other unusual effects | Check video cable connection |
| Connect to another source for comparison | |
| Inspect condition of ports on monitor and graphics card | |
| Adjust colour settings in monitor and PC display settings | |
| Screen rolling or moving | Check source frequency is within 55-75Hz |
| Check video cable connection | |
| Indicator light not illuminated | Check power connection |
| Check power has been turned on | |
| No video signal | Confirm PC and graphics card compatibility |
| Inspect condition of ports on monitor and graphics card | |
| Dim image | Adjust brightness/contrast |
| Image jitter/moire pattern | Nearby electronic equipment may be causing interference |
| Indicator on or flashing but no image on screen | Confirm monitor has been turned on |
| Confirm graphics card is installed | |
| Check video cable connection | |
| Inspect condition of ports on monitor and graphics card | |
| Check if PC is asleep or in standby, etc. | |
| Position or size incorrect | Check settings in monitor OSD menu and PC display settings |
Specifications
| Screen Size | 35" | Output | Audio |
| Curvature | 1800R | Signal Input | DP, DVI, HDMI |
| Viewing Angle (H/V) | 178°/178° | Power | AC 100-240V, 50/60Hz 2.0A |
| Aspect Ratio | 21:9 | OSD Language | English, Español, Français, Deutsch,  , |
| Resolution | 2560x1080p | Environmental Temp. & Humidity | Operating Temp: 0-50°C |
| Backlight | E-LED | Storage Temp: -20-60°C | |
| Default Colour Temp. | 6500 | Operating Relative Humidity: RH 10% - 90% (non-condensation) | |
| Typical Brightness | 300 | Height Adjustment | No |
| Contrast Ratio | 2000:1 | Dimensions (with Stand) | 837.4*246.26*457.4mm |
| Dot Pitch | 0.0126*0.0126" | Weight | ~8.364kg |
| Response Time | 8ms | Refresh Rate | 75Hz |
System Requirements
| Operating System | Windows 7/Windows 8/Windows 10 64-bit or higher |
| Processor (CPU) | Intel Core i5 or AMD Phenom II X3 or higher |
| Graphics Card | NVIDIA GeForce GTX 950 or AMD Radeon R9 380 or higher |
| Memory | 6GB RAM |