1. Flip the unit over and remove the two screws holding the SSD (M.2 2280) cover in place.
2. Remove the cover and insert your SSD with the contacts facing the right (outlined) as this is where the contacts in the notebook are located. Use the existing threading to screw the SSD into place (outlined).
Note: your SSD may be able to be inserted with either side facing up, however, only one orientation will work with the unit. If you are not able to detect your SSD with one orientation, try to change the orientation of the SSD to show the other side. Be careful not to damage any contacts.
3. Once inserted and secured into place, place the cover back into position, and screw down with the screws removed in step 1.
Installation is now complete.