General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before your first use, even if you are familiar with this type of product.
The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to.
Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:
|Warning||This heading indicates that there is a serious risk of injury if you do not adhere to the warning(s).|
|Caution||This heading indicates that care should be taken to avoid injury to persons or damage to property.|
|A tick in a circle accompanies a measure or action that you should do or follow.|
|A cross in a circle accompanies a measure or action that you should NOT do.|
- Before connecting and turning on the washing machine, ensure the electrical voltage and circuit frequency of the connection correspond to those indicated on the appliance.
- Only connect the washing machine to a grounded (earthed) electrical outlet.
- Do not insert any objects into the appliance.
- Do not kink or damage the power cord and position it out of the way so no one steps on or places anything on or against the cord.
- Do not overload the wall outlet. Overloading can result in fire or electric shock.
- If the power cord is damaged, it must be replaced by Kogan.com, its service agent or a similarly qualified person in order to avoid a hazard.
- Never use this washing machine with a power adaptor or an extension cord.
- Unplug the washing machine from the power supply before cleaning, servicing, maintenance or moving the appliance. Pull from the plug, not by the cord.
- After use, always unplug the appliance and turn off the water.
- WARNING: All electrical work must be done in accordance with local and national electrical codes as applicable and should be undertaken by licensed and qualified persons only.
- Install the washing machine on a flat surface to avoid overturning during use. If the machine must be placed on carpet, make sure any ventilation openings in the base are not obstructed.
- This appliance is intended to be used in household and similar applications such as:
1. staff kitchen areas in shops, offices and other working environments;
2. farm houses;
3. by clients in hotels, motels and other residential type environments;
4. bed and breakfast type environments;
5. areas for communal use in blocks of flats or launderettes.
- Install the washing machine so that there is a distance of at least 200mm (20cm) between the appliance enclosure and any external heat sources, such as appliances containing heating elements.
- Connect the washing machine to the water mains using new hose sets. Do not reuse old hose sets. The required water pressure is 0.03MPa (min.) to 0.8MPa (max.).
- Make sure that all water and electrical connections are made by qualified personnel only, observing local safety regulations and following the user manual instructions.
- Improper installation may result in the risk of fire, electric shock and/or injury. We assume no liability for any eventual damages caused by improper installation.
Usage Conditions and Restrictions
- The appliance is designed for private domestic use only. It is not suitable for commercial or trade use. The appliance has a capacity (max. weight of dry wash load) of 10kg.
- Do not operate this appliance outdoors.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
- Before loading the machine, always ensure no pet or young child has climbed into it.
- Make sure all pockets of clothing to be washed are empty. Hard, sharp objects such as coins, safety pins, bra wires, nails, screws or stones can cause extensive damage to the appliance and block the pump.
- Any damage or malfunction resulting from foreign objects is not covered by your warranty and may lead to expensive repairs. We assume no liability for any eventual damages caused by improper or faulty use.
Cleaning & Maintenance
- Before cleaning or carrying out maintenance, always unplug the appliance from the power supply.
- Except for the filters that require regular cleaning, the unit has no user-serviceable parts contained within. Do not attempt to repair, disassemble or modify it. Repairs made by inexperienced or unqualified persons may cause injury and/or make more serious repairs to the appliance necessary.
- CAUTION: After each wash, check and clean the lint filter inside the drum. Also, check and clean the lint filter at the back of the machine next to the drain hose outlet on a regular basis.
- This appliance should only be serviced by an authorized service centre and only genuine spare parts should be used. Contact Kogan.com Support for advice.
Do not let children climb into the washing machine or peer into the rotating spin barrel.
Do not wash clothes that have the residue of flammable materials.
Do not use the appliance if the power cord or plug is damaged to avoid an electric shock, short circuit or fire.
Regularly clean the power plug to remove dust and dirt and avoid contact failure.
Turn the machine off before pulling out the plug from the socket if the machine is not in use.
Do not place any flammable items on top of the washing machine.
Insert the power plug securely.
Use a 230-240V AC power source.
To avoid electric shock, fire and malfunction, do not install this machine in a damp place.
Do not pull out or insert the plug with wet hands to avoid electric shock.
Ensure the water inlet hoses are connected and the taps are turned on before washing a load.
Do not allow children to lay or sit on top of the washing machine.
Do not change the power cord. If it needs changing, contact a qualified electrician or Kogan.com Support.
Do not wash jackets, raincoats, fishing coats and similar clothes in the washing machine.
Do not pull the power cord when removing the plug.
The water temperature should not exceed 60°C when washing with warm water.
|Top Load Washing Machine|
|7||Rollers (one on each back corner)|
|8||Handle (one on each side)|
|11||Cold and hot water connections|
|12||Hot water supply hose|
|13||Cold water supply hose|
|Not shown: Base cover and screw for attaching it to the unit|
C Documentation (not shown) Quick start guide, Warranty certificate
- This product has been packaged to protect it against transportation damage. Keep the original packaging carton in a safe place. It will help prevent any damage if the product needs to be transported in the future. In the event that it is to be disposed of, please recycle it and all other packaging materials where possible.
- Plastic wrapping can be a suffocation hazard for babies and young children. Ensure all packaging materials are out of their reach and disposed of safely.
- Unwind the power cord to its full length and inspect it for damage. Do not use the appliance if the appliance or its cord has been damaged or is not working properly. In case of damage, contact Kogan.com Support for advice on examination, repair or return of the damaged product.
- Read this manual to familiarize yourself with all the parts and operating principles of the washing machine. Pay particular attention to the safety instructions.
Installing the Base Cover
- Make sure the power cord is unplugged from the mains supply.
- Place some padding (such as a soft mat, blanket or thick towel) on the floor and gently lay the washing machine on the padding, back side down. Take care not to dent the housing.
- Insert the base cover into the hooks of the leg, pushing it straight until it reaches into the front hooks.
- Fasten the base cover with the supplied screw(s).
- Carefully set the washer upright.
Levelling the Washer
- Install the washer on a stable and level surface, in a dry location, out of sunlight.
- The inbuilt levelling indicator will help you determine whether levelling is necessary. If so, adjust the adjustable leg (at the front right side of the machine), as illustrated, right. The maximum permissible inclination of the supporting surface is 2°.
CAUTION: Installing the washer on a carpeted floor may cause vibration issues. If you must install it on carpet, make sure not to block any ventilation openings on the bottom of the washer.
Connecting the Water Inlet Hoses
Install the water inlet hoses to your hot and cold water taps, as described below.
- Check and ensure that the sealing washers are firmly in place.
- Attach the straight end of the hose to your water taps. Make sure to attach the hot water supply hose (with red markings) to the hot water tap and the cold water supply hose (with blue markings) to the cold water tap.
- Tighten the coupling nuts securely by hand, as illustrated below (the sealing washer is part of and located inside the tap end).
- Attach the curved end of the hose to the corresponding inlet valve of the washer.
- Tighten the coupling nuts securely by hand, as illustrated below.
- Tighten the nut by turning it clockwise while holding the hose. (To detach the water supply hose, turn the nut anticlockwise after turning the tap off.)
- Turn on the taps and check for leaks. Tighten the coupling nuts firmly if there is any leakage. If your water pressure is strong, close the water tap completely, then open it slightly.
- Both the hot water and cold water hoses must be connected to your taps.
- Make sure your hot water from the tap is no hotter than 60°C.
Caution: When tightening the clamping nut, take care not to damage the water inlet valve joint. Apply force evenly and do not twist the water inlet valve.
Caution: Use only the new (supplied) hoses with your new appliance. Do not use a hose from an existing machine or one that has been used previously.
Caution: In the event that the hoses are too short for your set-up, please seek advice from your local washing machine store to purchase a longer hose.
Installing the Drain Hose
- The drain hose and drain pump filter are located at the back of the machine, as illustrated below, left.
- Pinching the two bands of the clamp on the drain hose, connect it to the drain hose connection at the back of the washer, as illustrated below.
- When the washer is in use, put the drain hose into a drain spout (or into a sink/tub), as illustrated on the opposite page.
- While the washer is in use, make sure the height of the drain hose is at least 80cm, otherwise, the washer will not work well or the water may flow out in the course
of washing. Ensure the drain hose is not higher than 120cm above ground, otherwise, the washer will not drain water well.
- Never lay down the drain hose, as water will be discharged.
- Be sure the drain hose is properly routed so it will not kink or lift off the sink.
Using the Rollers
The washing machine is equipped with two rollers at the back that you can use to move the machine more easily. Tilt the washing machine by about 30 degrees and push forward or pull backward, while holding the machine securely on both sides with your hands, as illustrated below.
Do not move the machine on the rollers on uneven ground, which can damage the rollers.
Caution: Take care of your back! Do not tilt the washing machine too much, which could cause injury.
The Control Panel
Before You Start Washing
A. Make sure the washer is stable and level. The inbuilt levelling indicator will help you determine whether levelling is necessary. If so, adjust the adjustable leg (front right) to stabilize the washer.
B. Make sure the water inlet hoses are properly installed.
C. Plug the machine into a nearby power point.
D. Open the water taps.
E. Make sure the drain hose is properly installed. Hang the upper end of the hose over the laundry sink or into a drain spout.
F. Before using the washing machine for the first time, run a complete cycle without laundry items.
Select the Normal program and run the machine until the end of the program.
- Before washing, remove any coins, keys and other hard items from pockets. Close any zippers to prevent damaging your clothes and the washtub. Brush dirt and sand off clothes and turn pockets inside out.
- Sort your washing into appropriate loads: whites, coloureds, cottons, delicates, heavily soiled, etc.
Place delicate items into a wash bag for protection.
- Load your washing items uniformly in the tub.
- Add washing detergent.
- Press the Power button.
- Refer to the Program Selection Guide and select a suitable wash program. For the Normal and Heavy Duty programs, the machine will automatically choose the correct water power and level, wash and spin time and rinse type; for the Custom and Wool programs, the machine will automatically select the correct water level. Other parameters can be set individually.
- Close the lid and press the Start/Pause button. If the washer lid is not closed properly, the washer will sound an alarm and stop working before spinning.
- At the end of the wash, remove your washing, unplug the power plug from the wall outlet and close the water taps. Leave the lid open until the interior has dried.
Program Selection Guide
|Program||Suitable Items||Default settings for individual wash processes|
|Washing time * (minutes)||Rinse type||Spin time (minutes)|
|Normal **||Normally soiled clothing and other items||5-40||2 x Water saver rinse||5-26|
|Custom||Dependent on the custom settings||10||4 x Shower rinse||5|
|Delicate||Delicate fabrics, lingerie||6||2x Water saver rinse||2|
|Heavy Duty||Heavily soiled cottons, workwear||7-14||2x Water saver rinse||7-8|
|Blanket||Blanket or bulky items||12||2x Water saver rinse||8|
|Wool||Delicates, knitwear||10||2x Water saver rinse||2|
1. Total program times differ and depend on the weight of the wash load and water level.
2. When the water level of the Normal program is set to 8, the program has a default setting of 90L of warm water; all other programs have cold water as a default (water temperature is adjustable).
Detergent and Load Recommendations
- It is recommended that use detergent in the amounts shown below. Too little will give poor washing results, but too much will affect rinse performance and may cause overflow of suds, which could interfere with machine operation.
CAUTION: Do not overfill detergent.
- Add detergent into the detergent box or put it directly into the tub.
- Dilute fabric softener with a little water and carefully add it to the softener dispenser on the balance ring for dispersion through the final rinse.
Customising a Program
This washing machine is equipped with a fuzzy logic function that automatically chooses certain wash cycle processes for the Normal, Heavy Duty, Custom and Wool programs. You do not have to adjust them yourself, however, if you want to adjust these values yourself, proceed as follows:
1. Prepare your washing according to points 1 to 4 on page 16.
2. Press the Power button, then press the Program button to select the washing program, e.g. Normal, Heavy Duty.
3. Press the appropriate process button to select the process and time you want to adjust. The relevant indicator light will illuminate when the option is selected.
4. Press the Water Level button and choose an appropriate water level.
5. Close the lid and press the Start/Pause button for the washing program to start.
6. At the end of the washing program, a buzzer will sound to alert you that the program has finished before the power is shut off automatically.
7. Close the water taps and unplug the power plug from the wall outlet.
8. If you want to use a particular customised program on a regular basis, you can program it to the machine’s memory for easy access the next time you want to use the same program. See ‘Memory function’, for instructions.
The Blanket Program
Use this program for washing blankets or other bulky items. It will automatically select the highest water level (90L), but you can adjust this manually down to 62L according to the size of your bulky item(s).
1. Press the Power button and open the washer lid.
2. Press the Program button repeatedly until the indicator for the Blanket program flashes.
3. Dissolve an appropriate amount of washing detergent with a little lukewarm water, then pour the detergent solution directly into the tub of the washing machine.
4. Fold up the blanket and put it into the washing tub, as illustrated below.
|Fold in two by the long side||Fold 4 times in the same direction||Roll up the blanket||Put it into the wash tub with the edge downwards|
5. Close the washer lid.
6. Press the Start / Pause button for the washing program to start.
7. At the end of the washing program, a buzzer will sound to alert you that the program has finished before the power is shut off automatically.
8. Close the water taps and unplug the power plug from the wall outlet.
9. It is recommended that cleaning the lint filter after washing a blanket.
NOTE: If you notice that the blanket floats up during the wash, press the Start/Pause button, the washer will stop working temporarily. Push the blanket down and press the Start/Pause button again to continue washing.
Selecting a Wash Cycle Process
On occasion, you may want to select a single wash cycle process (or two processes)
instead of a complete program. For example, you may want to spin clothes that got
wet from rain while hanging on the line or rinse and spin clothes washed by hand.
- To set a spin cycle only, set the WASH time and RINSE options to "0" and then select a SPIN time (from 0-9 minutes). Then proceed as described opposite.
- To set a rinse and spin cycle, set the WASH time to "0", then select a RINSE option (from 1 to 4) and then the SPIN time (from 0-9 minutes). Then proceed as described opposite.
Preset Timer (delayed washing)
This washing machine has a 0-24 hour preset function, which you can set to determine the time when the washing program will finish. (It is, in effect, similar to a ‘delayed start’ function, but you set the time period after which you want the wash to finish rather than to start.)
- The Preset function is not available for the Delicate program.
- To avoid water leakage when using this function, make sure the water taps are open, the drain hose is properly installed and the washing load and detergent are properly prepared.
- Put your washing in the machine, loading items uniformly in the tub.
- Press the Power button.
- Select the required Program and process and any other Water Level, Temperature and Ultrasonic, if required.
- Press the Preset button to select the desired time period (in hours) for the wash to finish.
- Select the water level, if necessary.
- Add any detergents.
- Close the washer lid and press the Start/Pause button.
- After setting the Preset, the corresponding light will illuminate and all other lights will be switched off about one minute later. (If you set the child lock, the Child Lock light will be on.)
- To check the preset program, press any button (except for the Power button); the program will be indicated for 5 seconds. During these 5 seconds, you can press the Water Level button and set the water level.
- To cancel the preset, shut off the power.
- To change the preset time, first, cancel the preset, then set it again.
Adding Detergent to a Present Wash
When using the delayed wash, please use powder detergent. Do not add detergent directly to the wash tub ahead of the wash time, but follow the instructions below:
- Washing detergent: either put detergent into the detergent box or, if you prefer to put it directly into the wash tub, wrap the powder in E small cloth.
- Fabric softener: dilute the softener with twice the amount of water, then pour the solution into the softener dispenser.
Hot / Cold / Warm Water Wash
This top load washing machine must be connected to both a cold and a hot water tap. You can then set it to use either just cold water for a cold water wash or just hot water for a hot water wash or both hot and cold water for a warm water wash.
To select the wash temperature, press the Temperature button.
- Cold wash: the corresponding indicator light is on.
- Hot wash: the corresponding indicator light is on.
- Warm wash: both the Cold and Hot wash indicator lights are on.
The water power affects the pause time of the pulsator and hence the intensity of the wash. It is automatically selected for the wash and rinse process, however, you can also adjust it yourself (except for the Delicate and Blanket programs). To adjust the water power level:
- Press the Start/Pause button, then press the Soak/Variable Wash button: the display will show "HO".
- Press the Soak/Variable Wash button again, repeatedly, to increase the water power level from "H1", "H2", "H3" to the strongest, "H4".
- Press the Soak/Variable Wash button again, repeatedly, to decrease the water power level from "L1", "L2", "L3" to the weakest: "L4".
Setting The Water Level And Other Processes
You can set the water level for wash and rinse processes. For example, if you are sensitive to detergent residues in your washing, you may want to select a higher water level for rinsing.
To set different water levels:
- Press the Wash button until the Wash light flashes; press the Water Level button to choose the appropriate water level; press the Wash button to set the wash time.
- Then press the Rinse button until the Rinse light flashes; press the Water Level button to choose the appropriate water level; press the Rinse button to set the number of rinses.
To set other processes:
- Then press the Spin button until the Spin light flashes; press the Spin button to set the Spin
- Finally press the Start/Pause button: the washer will start operating according to the set values for wash and rinse water levels, number of rinses and spin time.
For certain wash programs, the machine automatically detects the weight of your wash load and selects the appropriate wash cycle processes.
- For the Normal and Heavy Duty programs, the machine will automatically select the correct water power and level, wash and spin time and rinse type.
- For the Custom and Wool programs, the machine will automatically select the correct water level. Other wash cycle processes have to be manually set.
This top load washing machine is equipped with an ultrasonic pump, which generates thousands of vibrations per second into the wash tub. These vibrations help remove stains and dirt without chemical stain removers, thus reducing the required detergent amount and wash time.
To select this feature, press and hold the Preset/Ultrasonic button for four seconds until the corresponding light comes on and a buzzer sounds. Repeat the steps to cancel. When selecting the Ultrasonic wash, please use less detergent than usual.
When you run the Normal, Custom or Heavy Duty program, the machine memorises your settings (except for preset time and water level) for the next time you select it. NOTE: This function is not available for the Wool, Blanket and Delicate programs.
With the child lock activated, the machine will stop working automatically and sound an alarm if the washer lid is opened for 4 seconds. To set the child lock:
- Press the Power button to switch on the power, then press and hold the Program button for 4 seconds until a buzzer sounds. The child lock will be activated when the Start/Pause button is pressed. Repeat the steps to cancel.
Start of Washing
Washing will start when the water inside the tub has reached two levels below the set level while the water will continue to flow in. This early start of washing will increase the wash time and allow the detergent to dissolve fully before the start of the set wash time. This function will be ineffective:
- When water level 1 (28L) or 2 (35L) is selected.
- When the Delicate or Blanket program is selected.
- When Soak is selected, after the soaking process.
Not all unusual Incidents you may encounter with your washing machine are faults or cause for concern. Check in the list below what issues may arise and why. Check in the table below for solutions to other common problems.
- The drain hose is leaking water during the first use. Does this indicate there is a problem?
No, this is normal; it is residual water from the performance test in the factory and no cause for concern.
- Why is there still some water intake during the wash or rinse cycle?
When the water level is low, the washing machine will automatically refill during the washing or rinsing process. This is no cause for concern.
- At the beginning of the spin cycle, why is the tub turning first and then stopping?
This is intermittent spinning and it results in better spinning performance.
- During the spin cycle, why is the machine spinning and then stopping suddenly and taking in water again?
If the washing Is piled up at one side of the tub during the spin cycle, the washing machine automatically takes in more water to redistribute the load. Once the load is balanced again, the spin cycle will continue.
- Why is there a sound like water flowing after spinning?
This is the sound of the balancing liquid in the balance ring. This helps reduce vibration during spinning.
- Why is the control panel still warm after the power is switched off?
This is caused by the memory circuitry still working.
- The washer does not work at all. What could I have done wrong?
1. Check and ensure that the washer is connected properly to the power supply and power is switched on at the outlet.
2. If both are OK, first press the Power button, then press the Start/Pause button and then press the Preset button.
3. If the machine still does not start the set program, check elsewhere in your home whether there has been a power failure or whether the fuse or circuit breaker has been activated.
|If none of the solutions offered above and below help you solve the problem, contact Kogan.com Support.|
When the following problems occur, the microcomputer inside the washer will detect the abnormal condition. An electronic buzzer will sound for approximately 10 seconds, an error message will flash, as shown below and the washer will stop operating.
Type of Problem
Where to Check
The washer does not work at all.
Water does not flow or only a slim stream flows into the wash/ spin tub.
Water does not drain out.
The washer does not spin.
The washer does not wash.
NOTE: Press the Start/Pause button once to release the emergency stop and cancel the error message; press it again to restart the operation.
Other Useful Information
Cleaning & Care
To prolong the service life of the washing machine, keep it in good condition and perform regular maintenance. For any type of cleaning and maintenance, make sure the washing machine is disconnected from the mains power supply.
Cleaning the Washing Machine (when required)
- Use a soft cloth to wipe any water or dirt off the washer lid and housing. If using a damp cloth, squeeze it almost dry to avoid leaving water residues.
- The detergent box may be pulled out for cleaning, if required. Other inside parts should be wiped with a damp cloth, if necessary.
- Do not use any chemical, alkaline or abrasive cleaning agents to avoid damaging the surface. Do not spray water directly onto the washer housing.
If you frequently use a COLD wash cycle, you will need to clean the inside of your washing machine regularly (every three months), especially if you use a fabric softener. Liquid detergents can cause detergent scum to build up around the outside of the inner tub, which cold water will not remove and which can cause bacteria, unpleasant odours and eventually soiling of your wash load.
To remove scum build-up from the inside of a washing machine, run a cleaning cycle without clothes using the Heavy Duty program and hot water.
As a cleaning agent, use a commercially available washing machine cleaning product (such as Trimat Washing Machine Cleaner) according to the instructions on the product) or use a mix of bicarbonate of soda (Zz cup) and white household vinegar (2 cups).
Cleaning the Lint Filter (suggested interval: every week)
Take out the lint filter as illustrated below. Open the filter and rinse it clean under running water, taking care not the damage any parts. Reinstall the filter, making sure it fits securely behind the cover clasp and latches and locks securely into place.
Cleaning the water inlet valve (suggested interval: every 6 months)
To avoid blockage of the mesh filter at the water inlet after long time use, detach the water inlet hose, making sure you have turned off the water supply at the taps beforehand. Take the mesh filter out of the water inlet valve and clean the filter with a soft brush. Then assemble the mesh filter back into the valve and reconnect the water inlet hose.
Cleaning the hose filter (suggested interval: every 6 months)
To avoid blockage of the hose filter after long time use, detach the water inlet hose, making sure you have turned off the water supply at the taps beforehand. Turn the nut anticlockwise to take off the hose, clean the filter under running water or with a soft brush, then reconnect the hose.
Drain Pump Maintenance
Clean the drain pump filter regularly (at least once a month) to avoid blockages created by bobby pins, coins and excess lint.
Proceed as follows:
1. Disconnect the washer from the power source.
2. If necessary, wait until the water has cooled down.
3. Place a container underneath the pump opening to collect any spillage (see below, left).
4. Turn the filter cap anticlockwise to take it out gently (see below, right). Always keep a rag nearby to dry up water spillage when removing the pump filter.
5. To remove any objects from the filter, wash it thoroughly in a basin or under running water (see below, left).
6. Put the cap back and place the filter back in its seat (see below, right).
Service, Repair and Spare Parts
If the appliance is damaged, do not attempt to repair it yourself. If it requires repair or service, contact Kogan.com Support to arrange for examination or return of the product.
If the appliance is not going to be used for an extended period of time, please unplug the machine from the power supply and disconnect all hoses. Clean the machine and filters as described previously. Let the machine air-dry thoroughly. Then store it in the original packaging in a dry location, out of reach of children.
Specifications and Technical Parameters
|Dimensions||601 mm (W) x 626mm (D) x 985mm (H)|
|Capacity (max. weight of dry wash load)||10kg|
|Water quantity (High)||90 litres|
|Power source||230-240V-, 50Hz|
|Required water pressure||0.03MPa - 0.8MPa (0.3kgf/cm2- Skgf/cm2)|
|Liquid ingress protection||IPX4|
|Required Tap Size||20mm|
- Packaging materials are recyclable. Please keep them for future use or dispose of them responsibly for recycling.
- At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advice on recycling facilities in your area.
Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased. All Images in this manual are for reference purposes only. Parts are not necessarily pictured to scale.