Safety & Preparations
- Read the instructions carefully. Ensure no parts are missing.
- Lay out all of the components on a soft surface as if you were preparing to do a jigsaw puzzle.
- Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front.
- Separate and identify each component from the hardware pack, and rest each one in its proper location before fastening.
- DO NOT fully tighten screws, leave slightly loose. When the item is fully assembled tighten the screws but do not overtighten.
- DO NOT use power tools on the unit as this can cause damage and may affect your warranty.
- If glue is required, DO NOT set until you are certain the parts belong together.
Note: this manual refers to multiple sets of slide runners and slide tracks (pictured below separately).
To avoid any damage during transit, the slide runners and slide tracks have been pre-assembled together in pairs. Each pair includes a slide runner and slide track. Before assembling your coffee table, please separate the runners from the tracks according to the below instructions.
1. Extend the slide runners apart from the slide tracks
2. Gently press the plastic release lever on the slide runner while pulling the slide runner and slide track apart from each other
3. The slide runner and slide track should now be separated. Repeat these steps for all remaining pairs.
Parts
Assembly
|
Step 1 Parts: 002C x5 |
Step 2 Parts: 002C x1 |
 |
 |
|
Step 3 Parts: 009C x3, 004C x1 |
Step 4 Parts: 009C x3, 004C x1 |
 |
 |
|
Step 5 Parts: 006C x4 |
Step 6 Parts: 003C x4 |
 |
 |
|
Step 7 Parts: 003C x2 |
Step 8 Parts: 002C x9 |
 |
 |
|
Step 9 Parts: 002C x3 |
Step 10 Parts: 002C x3 |
 |
 |
|
Step 11 Parts: 009C x6, 005C x2 |
|
 |
|
| Step 12 | |
 |
|
|
Step 13 Parts: 007C x2 |
|
 |
|
| Step 14 | |
 |
|
|
Step 15 Parts: 001C x6 |
|
 |
|
|
Step 16 Parts: 001C x9 |
|
 |
|
|
Step 17 Parts: 008C x9 |
|
 |
|
Assembly is now complete!