Inserting and Removing the Jet
Insert the jet into the centre of the decorative ring on the top of the unit.
When usage is complete, simply lift the jet back out of the ring.
Filling up the Water Tank
Open the lid on top of the unit and pour water in through the top inlet.
Close the lid when the tank has been filled.
When ready, press the triangular power switch to turn on the water jet.
Press it again when finished to turn the jet off.
While leaning above a sink, aim the jet towards the areas you would like to clean.
When using for the first time, please adjust the pressure down to the minimum level, and then adjust upwards to your own personal preference.
To charge, remove the cover at the bottom of the unit, insert the charging point, then turn on your charger.
Note: Do not use the unit upside down or at a 180° angle.
Warning: Do not use this unit while it is charging. There is a risk of electric shock.