Safety and Warnings
- Please follow all instructions to operate the headphones.
- Charge the headphones with an input power below 5V/1A to protect the battery. Input power greater than this can cause damage to the unit.
- Do not use or store the headphones in a damp or humid environment.
- Keep the headphones away from heat sources such as radiators, stoves or other heat generating devices, as the unit is not designed to withstand high temperatures.
- Do not block or insert foreign objects into the ports of the headphones, such as the charging port, microphone, etc.
- To protect your hearing and extend the life of the speakers, do not keep the unit at maximum volume for extended periods of time.
- If damage occurs, please contact the Support Team for examination.
Overview
- Volume + / Next
- Multi-Function Button (MFB)
- Volume - / Previous
- Status LED Indicator
- AUX Port
- ANC Indicator
- ANC On/Off
- Microphone
- Charging Indicator
- USB Charging Port
Getting Started
Charging
- As the product has a built-in battery, please use the provided micro USB cable to charge the headphones.
- Charging voltage and current is 5V/300mA.
- Fully charge the unit before first use.
- It may take up to 2 hours to charge for each subsequent use.
- The LED will turn red when on low battery and will turn blue when fully charged.
Turn Bluetooth ON/OFF
- To turn on: Hold down the MFB for 2 seconds. The LED will light up blue.
- To turn off: Hold down the MFB for 3 seconds. The blue LED will turn off.
Turn Active Noise Cancellation (ANC) ON/OFF
- Short press the ANC button to activate the ANC function. The LED will turn green. You can then use the ANC function with Bluetooth or wired mode.
- Short press the ANC button to disable the ANC function. The green LED will turn off.
Connecting to Bluetooth
- Hold down the MFB for 2 seconds. The LED will flash blue and a voice prompt will be heard. The headphones are now in pairing mood.
- Activate Bluetooth on your phone or tablet and locate the headphones in the list
- Click on the headphones to connect. If the LED changes to a solid blue for 1 second, and then flashes every 5 seconds, the connection is successful.
- Pairing mode can be active for up to 5 minutes. If you miss this timeframe, restart the device and repeat these steps.
Operation
Music Control
- Play/Pause: Short press the MFB
- Previous: Long press – to select the previous song
- Next: Long press + to select the next song
- Volume +: Short press + to increase the volume
- Volume -: Short press – to decrease volume
Answering Incoming Calls
- Short press the MFB to answer incoming calls.
Please note: Some phones default to answering calls via their own receiver. If you are experiencing this issue, refer to your phone’s manual for instructions on how to change this.
End Current Call
- Press the MFB once to end the current call.
Reject Incoming Calls
- Press the MFB for 1 second to reject an incoming call.
Last Number Redial
- Double press the MFB to redial the last calling number.
Siri (iOS Only)
- In standby status or playing music, press the MFB for 1 second to activate Siri.
Switch Call Answering
- Press the MFB for 1 second to switch answering the call via the headphones or your handset.
Wired Mode
- Connect the headphones to a compatible device using the 3.5mm audio cable.
- Except for the ANC button, all other buttons are invalid.
Note: Phone communication functions are only available with Bluetooth mode.
Troubleshooting
Wired mode not working |
Check cable and port for dirt, dust and damage. |
Not charging |
Check cable, charger and port for dirt, dust and damage. |
Not connecting to Bluetooth |
Reset both devices and attempt again |
Specifications
Bluetooth Version |
V4.1 |
Product Size |
L 168mm * W 202 mm * H 95mm |
Net Weight |
252g |
Wireless Working Range |
10m (without obstacles) |
Speaker |
Ø40mm |
Speaker Sensitivity |
94±3dB at 1KHz;1mW |
Profiles supported |
HFP1.6 A2DP1.2 AVRCP1.4 |
Impedance |
32Ω |
Active Noise Reduction |
~20dB |
Speaker Frequency |
20-20KHz |
Rated Power |
2*20mW |
Input voltage/current |
DC 5V/300mA |
Battery |
3.7V/500mAh |
Playing Time |
20H(BT), 14H(ANC+BT),30H(ANC,BT OFF) |
Talk Time |
25H(BT), 15H (ANC + BT) |
Charging Time |
2.5H |
Standby Time |
500H |
Voice Chat |
Supported |
Material |
ABS + Aluminium Alloy |