Note: these filters are compatible with Kogan SmarterHome™ Smart Air Purifier - (KASMTPRIFRA).
Please refer to the below diagram for how to access the filters.
A: Hold both upper sides of the unit, pull out the front panel, and lift it upward.
- Note: the black sponge used in front of the HEPA filter can be washed with water and can be re-used after dry. It is recommended to wash this sponge every 3 months to extend the life of the HEPA filter.
B: Pull down the strap on the filter to take out the HEPA filter.
C: Pull down the strap on the filter to take out the activated carbon filter.
D: Once filters are replaced, please firmly replace the front panel at the bottom first and then the top.
- Note: filters must be replaced in the same order.
For any assistance, contact Kogan.com support.