Kogan Smart HDR 4K LED TV (Series 8 MU8010, MU8510) - User Manual - (43", 49", 55", 65", 75")

This article applies to the following TVs:

Kogan 43" Smart HDR 4K LED TV (Series 8 MU8010)	KALED43MU8010SZA & KALED43MU8010SZB
Kogan 49" Smart HDR 4K LED TV (Series 8 MU8010)	KALED49MU8010SZA
Kogan 55" Smart HDR 4K LED TV (Series 8 MU8010)	KALED55MU8010SZA & KALED55MU8010SZB
Kogan 65" Smart HDR 4K LED TV (Series 8 MU8010)	KALED65MU8010SZA
Kogan 75" Smart HDR 4K LED TV (Series 8 MU8010)	KALED75MU8010SZA & KALED75MU8010SZB
Kogan 55" Curved Smart HDR 4K LED TV (Series 8 MU8510)	KALED55MU8510SZA & KALED55MU8510SZB

Contents

Safety and Warnings Important Information Product Overview Remote Control Assembly & Installation Stand Assembly Wall-mount installation Operation Channel Selection Input Source EPG Picture Settings Sound Settings Function Menu Option Menu Lock Menu Channel Menu

Network Connection Wired Connection Wireless Connection Media Freeview Applications Netflix YouTube Facebook Twitter AccuWeather Screencast PVR Function Connecting to a Soundbar/Sound System Troubleshooting Firmware Updates/Upgrades Specifications

Safety and Warnings

Handle with care and inspect regularly to ensure the product is in good working order. If this product, power supply cord or plug shows any signs of damage: stop use, unplug the product and contact Kogan.com support.

General Safety Instructions

Risk of electric shock. DO NOT OPEN! Do not attempt to service the television yourself, as opening or removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to the Kogan customer support team.
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The television should not be exposed to dripping or splashing and no liquid filled objects such as vases should be placed on the case.
In the event of smoke, strange noises or a strange smell from the unit, you should follow these steps: Turn off the unit immediately. Disconnect the power plug from the power outlet. Contact the Kogan customer support team. Never attempt to make repairs yourself.
Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill any liquids onto the set. Use special caution in households where children are present. The television is not suitable for children under 4 years old to operate.
Power supply cords should be routed safely to prevent dangers due to damaged cords. The mains plug is the main disconnect method, so it should be easily accessible and not be obstructed during use.
To avoid fires, no naked flame sources such as lit candles or burning incense should be placed onto the casing of the television.
Do not pull the plug out of a power outlet by pulling on the power cable. Always grasp the plug and pull. Never touch the plug with wet hands.
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them may be fatal.
Always turn the set off when it is not being used. Unplug the television from the power outlet when it will not be used for a long time or when there is an electrical storm. Never touch the antenna cable during a lightning storm.
Excessive volume from earphones and headphones can cause permanent hearing loss. Always monitor the volume of noise from these devices, especially when children are using them.

Installation

	Ventilation should not be impeded or limited by covering the ventilation slots with items such as newspapers, tablecloths, curtains etc. At least 10cm of space should be left around the apparatus for sufficient ventilation.
	The television should be situated away from heat sources such as radiators, heaters, stoves or other products that produce heat. Place the television in a position where the screen is not exposed to direct sunlight. It is best to have soft indirect lighting while watching and you should avoid a completely dark viewing environment and reflections to avoid eye fatigue. Keep the product away from high magnetic fields (such as near an amplifier speaker) to avoid affecting the tint.
	Do not place the television on an unstable table, stand or shelf. The set may fall, causing serious injury as well as damage to the television itself. If moving the television on a cart, move the unit with care as sudden stops and starts may cause the television to overturn.
	Do not place this television near water, for example near a bathtub, wash bowl, kitchen sink, laundry tub, swimming pool or in a damp basement etc.
	When moving the television to a warm location from a cold location, allow some time for any dew or condensation inside the television to evaporate fully before you turn the unit on.
	To prevent injury, the television must be securely attached to the floor/wall in accordance to the supplied installation instructions.

Cleaning

Unplug the television from the power supply before cleaning. Do not use any liquid cleaners or harsh chemicals. Use a soft, damp cloth.

Important Information

If the television is not positioned in a sufficiently stable location, it can be potentially hazardous due to the risk of falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer os the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• Keep small accessories out of reach of children so they are not mistakenly swallowed.

Product Overview

The Joystick controls your TV's basic features: arrow buttons (1-4) to navigate, centre button (5) to confirm). To use the more advanced features, you must use the remote control. (6) is the power indicator light and IR sensor for remote control.

NOTE: The above illustrations are for reference only and may vary between models.

Remote Control

POWER: Turn the TV on and off. INPUT: This button is used to switch among different sources, Select a source and press ENTER button to confirm. Digital Buttons (0-9): Directly select channel with digital buttons. RECALL: Switch to the previous program. SUBTITLE: In DTV source, the button is used for subtitle language. In USB source, the button is used to set subtitle. INFO: Display the program information. YouTube: If network connects, press this key to view YouTube directly. HOME: Press it to go to App home page. NETFLIX: If network connects, press this key to view NETFLIX directly. MUTE: Press this button to cut off the sound of the TV set temporarily, press again to resume. MENU: Display the main menu or exit the current menu. ENTER/LIST: Press to show channel list and favorite list on screen. Arrow Buttons ▼▲◄ ►: Use to select on-screen menu items and change menu values. BACK/GUIDE: Display menu GUIDE in DTV mode. Return function in app. EXIT: Exit the menu. COLOURED BUTTONS: It's used as it shows the EPG or Program Edit menu. VOL+/-: Press these buttons to adjust the volume. CH˅/˄: Press these buttons to change channel upward or downward. ASPECT: Press this button to switch the screen mode. l/ll Button: In ATV source, the button is used to set NICAM sound system. In DTV source, the button is used to set the audio language. REVEAL: Pressing this button will reveal any hidden data (answers to quizzes for example). Press the REVEAL button again to return to normal screen. INDEX: Press INDEX button, then index page displays. TEXT: Press TEXT button to enter or exit teletext mode. CANCEL: The CANCEL button will exit from any Teletext on the display. Press CANCEL button again to exit Teletext and return to live TV broadcast. HOLD: Press HOLD button to toggle Hold function on or off. When Hold is switched on, the page acquisition is stopped. When Hold is switched off, the page acquisition is started. SIZE: Press SIZE button one time to display the upper half of the screen in double height, press the SIZE button two times to display the lower half of the screen in double height, press three times to display the full screen in normal size. MIX (●): Teletext buttons for mix function, please refer to TTX description page. It is also used for recording function when TV is on DTV mode, please refer to PVR page. TIME: This button is used to show the time of the teletext. MODE: Press this key to go to picture menu. SUBCODE: Subcode mode gives the possibility to select certain subcode pages of a Teletext page. Entry of digits within the range 0...9 for current subcode entry. If the digit completes the entry, a page request is started. Press CH a and CH v buttons to change the subcode pages. SLEEP: TV will be turn off automatically at preset sleep time if you have set sleep timer. Press this button to select sleep time among 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min and off. S.MODE: Press this key to go to sound menu. DIGITAL MEDIA PLAYER CONTROL BUTTON: Include play/pause, stop, previous, next, backward, forward is used in USB mode. Please refer to relevant instructions in the section of multimedia player. PLEASE NOTE: The dedicated Netflix and YouTube buttons will only load the respective application if you are not already viewing another application. For example, pressing the YouTube button while Netflix is loaded will not open the application - you will need to press the HOME button first.

Assembly & Installation

Before assembly, turn off the TV and spread cushioning flat to lay the TV on and prevent damage.

Stand Assembly

The stands will have their left and right orientation physically marked on them with an "L" and "R" respectively - this refers to the left and right of the TV as you face the screen from the front.

Wall-mount installation

Note: Wall-mount must be purchased separately.

1. Please double check the distance of wall-mounting holes on the back cabinet before you mount your TV on the wall.
2. Mark the horizontal distance screw holes with pencil on the wall using the long wall-mounting bracket as a ruler
3. Align the upper holes on the short wall-mounting bracket to the horizontal distance markers, then mark the vertical distance screw holes with pencil on the wall.
4. Drill the holes at each of the four position markers on the wall.
5. Drive nylon sleeves into the screw holes on the wall.
6. Fasten short wall-mounting bracket on the Nylon sleeves with self-tapping screws on the wall.
7. Fasten long wall-mounting bracket (2) with screws (3) into the two screw holes on the rear cabinet (Place the long wall-mounting end with hook upper as figure 3 shown);
8. Left the TV and hang it on the wall by two people.

NOTES:

1. Please mount your TV on the stronger areas of the wall so it may withstand the TV’s weight.
2. Be careful not to scratch the panel and any TV cabinet or unit when you're fastening the screws on the TV.

First Time Setup

1. Select your OSD (On-Screen Display) language.
   • Use the arrows and enter button on your remote to select this.
2. Data collection and firmware updates.
   • You can read through this as you wish. Use the right button and enter to select "accept".
3. Set up your network
   • You can select "Yes" to proceed with connecting to the internet or select "skip" if you wish to do this at a later time.
   • If you select "Yes", see Network Connection for further information.
4. Select your tuning country.
5. Select your timezone.
6. Do you wish to Auto Search (automatically scan for channels)?
   • Select "Yes" to proceed or "skip" to do this at a later time.
   • If you select "Yes", you will be taken to the auto-search menu.
   • Select your Service Type (ATV - Analog TV or DTV - Digital TV), you can use the left and right buttons to change this.
   • Select your country.
   • The TV will then begin tuning. You can skip during this by pressing the Menu button.
   • Once completed, the TV will automatically begin showing one of the channels it has found.
7. Basic setup is now complete.

Operation

Channel Selection

To set a channel:

1. Use the number keys, e.g. 9 > 0 > Enter to select channel 90.
2. Use the CH ▲/▼ buttons on the remote.
3. Press RECALL button to revisit the last channel.
4. Select from the Channel List or Favourite List.

Press INFO to view current channel information.

Input Source

Press INPUT to select the input source.
Press ▲/▼ to cycle through the input sources, and press ENTER to confirm your selection.

EPG

Press BACK/GUIDE to enter the EPG (Electronic Program Guide) menu. Highlight a programme and press ENTER to set a reminder: your TV will automatically switch to that channel at the scheduled time.

Picture Settings

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select "Picture" option.
3. Press ► key to enter "Picture" submenu.

Picture Mode 
Your TV has four picture settings (Sports, Normal, Mild, Save, User) that are pre-set at the factory. Only "User" mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness.

1. Press ▲/▼ key to select "Picture Mode" option.
2. Press ▲/▼ key to select one picture mode.

From our testing, the recommending setting for this model's picture mode is the Sports option.

User settings (Contrast, Brightness, Color, Sharpness, Tint)
Your TV has several settings which allow you to control picture quality.

1. Press ▲/▼ key to select a particular item.
2. Press ◄/► key to decrease or increase the value of a particular item.

Note: The adjusted values are stored according to the selected particular item.

Contrast:	Adjusts the lightness and darkness between objects and the background.
Brightness:	Adjusts the brightness of the picture.
Colour:	Adjusts the colours, making them lighter or darker.
Sharpness:	Adjusts the outline of objects to either sharpen them or make them duller.
Tint:	Adjusts the Tint of the picture.

Backlight
You can Change the brightness of the entire screen according to your preference.

1. Press ▲/▼ key to select "Backlight" option.
2. Press ◄/► key to increase or decrease the backlight value.

Backlight: Adjusts the brightness of the whole screen.

Colour Temperature
You can change the colour of the entire screen according to your preference.

1. Press ▲/▼ key to select "Colour Temperature" option.
2. Press ▲/▼ key to select one colour temp.

Cool:	Makes whites more blue-toned.
Standard:	Makes whites natural.
Warm:	Makes whites more red-toned.

From our testing, the recommending setting for this model's colour temperature is the Warm option.

Sound Settings

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select "Sound" option.
3. Press ► key to enter "Sound" submenu.

Sound Mode
You can select the type of the special sound effect to be used when watching a given broadcast. Your TV has five sound settings ("Standard", "Music", "Movie", "Sports", "User") that are preset at the factory.

1. Press ▲/▼ key to select "Sound Mode" option.
2. Press ▲/▼ key to select one sound mode.

Standard:	Selects the normal sound mode
Music:	Provides clear and live sound for music.
Movie:	Provides live and full sound for movies.
Sports:	Emphasizes bass over other sounds.
User:	Selects your custom sound settings.

Equalizer
Set sound equalizer mode.

Balance
If the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference.

1. Press ▲/▼ key to select "Balance" option.
2. Press ◄/► key to decrease or increase the value of the item.

AVL
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “AVL” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

1. Press ▲/▼ key to select “AVL” option.
2. Press ▲/▼ key to select “On” or “Off”.

Surround sound
This is used to turn on surround sound to gain better sound effect.

1. Press ▲/▼ key to select "Surround sound” option.
2. Press ▲/▼ key to select “Surround” or “Off’.

AD Switch
Press ▲/▼ button to select AD Switch, then press Enter or ► button to enter sub-menu.
In it you can turn the AD Switch on or off and set the volume ratio in DTV mode.

Digital Audio Output
This is used to set digital audio output.

1. Press ▲/▼ key to select "Digital Audio Output” option.
2. Press ▲/▼ key to select “Auto” or “PCM” in DTV or HDMI mode.

Audio Language
You can set the first and secondary language for audio in DTV mode.

DAP
This is used to set DAP.

1. Press ▲/▼ key to select "DAP” option.
2. Press ► key to enter “DAP” submenu

HDMI ARC
Turn on or turn off the HDMI ARC (Audio Return Channel) function to allow sound to be passed back along an HDMI cable for use with an external audio device (such as a soundbar).

Audio Type
This used to set audio type

1. Press ▲/▼ key to select "Audio Type" option. 
2. Press ► key to select the audio type.

Function Menu

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select “Function” option.
3. Press ► key to enter “Function” submenu.

Noise Reduction
Press ▲/▼ key to select the Noise Reduction mode.
You can select the right mode to match the pictures.

MPEG Noise Reduction
Press ◄/► key to select the mode: off/low/middle/high.
The picture will be better when it is in “high” mode.

Aspect Ratio

1. Press ▲/▼ key to select “Aspect Ratio” option.
2. Press ▲/▼ key to change the size of the picture on the screen.

PVR File System

See PVR Function for information and use.

HDMI CEC

1. Press ▲/▼ key to select “HDMI CEC” (Consumer Electronics Control) option.
2. Press “ENTER” or ►key to enter “HDMI CEC” submenu.

Enable Link:	Press ◄/► to turn on/off the link setup.
Auto Power On:	When this option is "On” and the TV is in standby mode, turning on the input can also turn the TV at the same time.
Auto Standby:	When this Option is “On” and the TV is on, turning off the TV can also turn off the input into standby mode.

Note: Not all inputs will support this function.

HDMI EDID

This function is only used in HDMI mode to enable 4K resolution on the HDMI input you are viewing.

1. Press ▲/▼ key to select “HDMI EDID” (Extended Display Identification Data) option.
2. Press ▲/▼ key to select “4K” or “2K”.

Netflix Deactive

1. Press "▲/▼" key to select "Netflix Deactive" option.
2. Press “►” or “ENTER" key to confirm.
3. Press "Yes" to confirm again, the Netflix will be activated.

Netflix ESN

Display the Netflix ESN (Electronic Serial Number) information.

Netflix Version

Display the Netflix version.

Time Menu

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select "Time" option.
3. Press ► key to enter "Time" submenu.

Off Time

In "Off Time” item, press ► button or ENTER button to enter the submenu, set the day & time to turn off the TV set.

On Time

In "On Time” item, press ► button or ENTER button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can also choose which day to control your TV set in a week.

Sleep Timer

1. Press ▲/▼ key to select "Sleep Timer" option.
2. Press ▲/▼ key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins, 60mins, 90mins, 120mins, 180mins, 240mins).

Note: The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs. When the time is less than 60 seconds away, reminder information will be displayed on the screen. Press any key button to cancel the timer function.

Auto Sleep

 

Press ▲/▼ key to select whether to open the No signal Power off features. If this function is opened, the TV will power off when there is no signal.

Auto Sync

You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is decided by the DTV signal.

Clock

When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off.

Time Zone

You can choose it to modify your time zone in the TV set.

1. Press ▲/▼ key to select "Time Zone" option.
2. Press ▲/▼ key to select time zone.

Option Menu

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select "Option" option.
3. Press ► key to enter “Option" submenu.

OSD Language

1. Press ▲/▼ key to select “OSD Language" option.
2. Press ENTER or ► key to select a proper language for OSD (On-Screen Display).

OSD Time

Set the preferred amount of time for the OSD to be displayed on the screen.

PC Adjust

This option is only used in VGA.

1. Press ▲/▼ key to select “PC Adjust” option.
2. Press ENTER key to enter the“PC Adjust” submenu.

Reset

1. Press “▲/▼" key to select "Reset" option.
2. Press ► or “ENTER" key to confirm.
3. Press "Yes” to confirm again, the TV will turn off automatically and change all setting to factory setting.

Network Configuration

Please see Network Connection for information.

Software Update

When the TV needs to be updated, please copy the new software to a USB storage and insert the USB storage to TV, then operating by following steps.

1. Press “▲/▼" key to select "Software Update" option.
2. Press"►"or “ENTER" key to confirm.
3. Press "Yes” to confirm again, the TV will update by USB, Please wait a few minutes and don't turn off the power, it will turn off auto maticly when updating is finished.

See Firmware Updates/Upgrades for files and downloading instructions.

Internet Update Check

This can update TV via the internet. Use this to check for any available OTA (Over The Air) updates.

Info

Display the software information and LAN MAC address.

View End-User License

View End-User license information.

Network Update information

1. Press ▲/▼ key to select "Network Update information".
2. Press ► key to confirm
3. Press "YES" to confirm again, the tv will start to update via the network, please wait a few minutes and don't turn off the power, it will turn off automatically when updating finish.

Subtitle

This used to set turn on or turn off the subtitle function.

HBBTV

This used to set HBBTV (also known as Freeview).
Turn on or turn off the HBBTV (Freeview) function.

Standby Scan

This used to set standby scan.
Turn on or turn off the standby scan function in DTV mode.

Lock Menu

The "Lock" feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Password before any of the lock restrictions can be set up or changed.

1. Press ▲/▼ key to select "Lock" option.
2. Press OK or ► key to enter "Lock" submenu, "Enter Password" menu will appear, enter your 4-digit password to enter "Lock” submenu (the default and universal password is 1980).

Lock System

Set the Lock function on or off.

1. Press ▲/▼ key to select "Lock System" option.
2. Press ▲/▼ key to select "On" or "Off".

Set Password

1. Press ▲/▼ key to select "Set Password" option.
2. Enter your 4-digit password to enter "Set Password" submenu. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor skips to "Confirm Password” item, re-enter the same 4 digits, and your new password has been memorized.

When the programs are locked, you can also press the menu key, Info key and so on. Then you can press ◄/► key to call back the input-password window.

Parental Guidance

This option only used in DTV mode.

1. Press ▲/▼ key to select “Parental Guidance" option.
2. Press ▲/▼ key to select the lock level of the Parental Rate.

Channel Menu

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select "Channel" option.
3. Press OK or ► key to enter "Channel" submenu.

Auto Search

1. Press ▲/▼ key to select "Auto Search" option.
2. Press ► or ENTER key to confirm, then a notification window will be displayed on the screen.
3. Select "Start" to start search or "Cancel" to cancel it. When searching, press EXIT key to exit tuning at any moment. Press MENU key to skip DTV tuning when searching DTV or skip ATV tuning when searching ATV.
4. After all the available channels are stored, the searching menu will be exited.

Program Edit

After channels have been tuned, select “Program Edit” in the “Channel” menu, press “ENTER” button, channels can be edited such as delete or skip according to the user's habit.

Delete (Red) Button

This function can help delete channels.

1. Select the channel to be deleted in the "Program Edit".
2. Press "Delete"(Red) button, the channel will be deleted.

If you wish to recover deleted channels, you will need to retune your TV.

Block (Green) Button

This function can help lock or unlock the channel.

1. Select the channel to be Locked in the “Program Edit”.
2. Press "Block" (Green) button and input the right password, the lock mark is displayed at the left side of the channel.
3. Press “Block’’ (green) button again, the channel will be unlocked.

Skip (Blue) Button

This function can help skip over certain channels. Channel skips when selecting a program with the “▲/▼" button on the TV or remote control.

1. Select the channel to be skipped in the“Program Edit”.
2. Press “Skip” (Blue) button, the skip mark is displayed at the left side of the channel and this channel is shielded.
3. To cancel the Skip function, enter the channel edit menu, select the shielded channel and press “Skip” (Blue) button, the skip mark at the left side of the channel disappears, then the channel is recovered.

 

Favourite (Yellow) Button

This function can help store favourite channels that can be quickly selected.

1. Select the channel which is favourite.
2. Press “Fav” (Yellow) Button, the favourite mark is displayed at the left side of the channel and this channel is stored in the favourites list.
3. To cancel the Favorite function, enter the program edit menu, select the program and press “Fav” (Yellow) button, the favourite mark at the left side of the program disappears.

Move (Info) Button

This function can move the channel in the list.

DTV Manual Search

Enter digital number and press "ENTER” to select DTV Channel.

ATV Manual Search

 

1. Press ▲/▼ key to select "ATV Manual Search" option.
2. Press ► or ENTER key to enter the submenu.

Current CH

1. Press ▲/▼ key to select the second item.
2. Press ◄/► key to select current channel.

Colour System

Select ATV video system type function.

System

Select ATV audio system type function.

Search

You can use ► button to search channels from low frequency to high frequency and use ◄ button to search channels from high frequency to low frequency. When you have searched a channel, the searching will be paused and you can press it again for other channels after you store the channel.

Fine-Tune

1. Press ▲/▼ key to select the third item.
2. Press ◄/► key to select a better frequency for the current channel.

Signal Information 

This function is only used in DTV.

1. Press ▲/▼ key to select “Signal Information" option.
2. Press “ENTER” or ► key, you can see the information about the DTV channel.

Note: Signal Quality/Signal Strength (DTV Only): Unlike analogue channels, which can vary in reception quality, digital channels must have perfect reception quality or you will not receive them at all. So, unlike analogue channels, you are not able to fine tune a digital channel. If the signal strength indicates that the signal is weak, a possible solution is to adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.

Software Update (OAD)

Turn on or turn off OAD software update function.

OAD Scan

This option only used in DTV mode.

1. Press ▲/▼ button to select "OAD Scan” option.
2. Press ENTER button to search system software update file from DTV broadcast.

Network Connection

Press the "Menu” to enter, then pitch on the "Option”, and press "ENTER” or click the right button to enter the submenu.

Move to the "Network Configuration" option, and press "ENTER” or click the right button to enter the "Network Configuration" settings.

Wired Connection

Ensure you have an ethernet connection plugged in to use the wired connection option.

Go to the "LAN" setting to connect to a wired network.

When the wired network is used, if you select dynamic IP address setting, move to the "DHCP" option in the "Network Configuration", then click the "Setting", and press the “ENTER” button to enter.

If you select static IP address setting, move to the "Static" in the "Network configuration", then set up the IP, netmask, Gateway and DNS in sequence. When the setting is complete, move to "Setting" and press the “ENTER” button.

If this shows "Success”, the "WLAN" on the bottom right corner will turn to green from red; If this shows "Fail", it means the network can not connect, please check whether the ethernet cable and router can connect successfully or not.

Wireless Connection

Select the "WIFI" in the Network Configuration before using a Wi-Fi connection.

Select Scan AP to search for available networks. Please note that only 2.4GHz networks can be detected.

Select your home network and input the password.

If this shows "Success", the "WIFI" on the bottom right corner will turn to green from red, and it means the network connect successfully; If this shows "Fail", it means the network can not connect, please check whether the wireless router connects successfully or not.

 

Media

This TV is embedded with one USB port digital media player. It can find the devices support USB1.1/2.0, including flash disk, USB hard disk and digital camera. It supports functions such as: Display pictures, play music files and play video files.

1. In order to avoid affecting the user's viewing experience, please use a good quality and shorter USB cable
2. Play and preview of some of the non-standard files may appear abnormal.
3. Under the USB channel, you can use only the remote control.
4. Press the menu button to bring up the pop-up menu.

Data	Format
Picture	JPG, JPEG, PNG, BMP
Music	MP3
Video	MPG, MPEG, MP4, MKV, MOV

 

Freeview

Freeview is a live streaming and TV catchup service built directly into the TV's DTV service.

When first navigating to a channel, the Freeview prompt will appear (usually within 5-10 seconds, but allow up to a minute). Follow the direction onscreen to access the Freeview Electronic Program Guide guide (green button), channel-specific catchup TV services (red button) and promoted programmes (blue).

NOTE: Freeview services require internet access to work. An Ethernet connection is recommended for the highest quality and stability.

Applications

Note: These units cannot access or download external applications. These units do not have a web browser. Internet connection is required to use these applications.

Netflix

To access Netflix, select the application icon on the home screen, or press the corresponding button on your remote.

Sign in to your Netflix account to browse by genre, search for titles, manage your queue and review Netflix recommendations all from your TV. If you do not have a Netflix account, you will need to create a new account to use this feature. Watch TV show and movies online or by streaming them from Netflix. For more information, visit www.netflix.com.

Use arrow buttons to select one video and press "ENTER" key to play.

Press the "MENU" button to exit playing.

Use the arrow buttons to browse the pages, press "MENU" key to return to the main menu and press "EXIT" key to exit.

Note:

• A Netflix subscription is required to use the service, fees apply.
• The videos list searched from the TV may differ from the list searched from a web browser on PC.
• The playback videos may be paused, stopped or buffering occurring often depending on your broadband speed. We recommend a minimum connection speed of 1.5 Mbps. For the best playback condition, a connection speed of 4.0 Mbps is required.
• These services are provided by separate Content Provider. Please visit the content providers web site for specific information on their services.
• For service that requires a login, join the applicable service on the website using the PC and log in through the TV to enjoy various additional functionalities.

FAQs

How can I watch Netflix on my TV?

My TV show or movie loads slowly or keeps buffering.

How do I find TV shows or movies on Netflix?

I can't sign in to Netflix.

YouTube

To access YouTube, select the application icon on the home screen, or press the corresponding button on your remote.

Use the arrow keys to select a video and press OK to play.

Press  key to open or close control menu when playing.

You can sign in to your YouTube account through your TV, or via a mobile device on the same network.

For information on how to do this and more, please see the following:

Watch YouTube on your TV (newer models)

Facebook

Press the HOME button on the remote to display the home main interface. Then use the Arrow buttons to select the Facebook app and press OK button to view.

Input the right Email and password, Select "log in" button then press “OK” key to log in.

Press the arrow key to browse the pages and press" OK ” key to view.

Press MENU button to return to the main menu.

Press EXIT button to exit Facebook.

Red Button: log in or log out of Facebook.

Green Button: refresh the current page.

Twitter

Press HOME button on the remote to display the home main interface. Then use the Arrow buttons to select the Twitter app and press OK button to view.

Input the right Email and password, then select “Authorize app” button and press “OK” key to log in.

Use the arrow key to browse the pages, press MENU button to return to the main menu and press EXIT to exit twitter.

Red button: log in or log out twitter.
Green button: refresh the current page.
Yellow button: write a new tweet.
Blue button: Search tweet.

AccuWeather

Press the HOME button on the remote to display the home main interface. Then use the Arrow buttons to select the Accuweather app and press OK button to view.

Input a city or Zip code/postcode and press select to get the weather information

Screencast

With the use of a screen mirroring app, the TV can mirror your phone screen for a quick casting of content. This will show the notification bar on your phone.

See the article below for instructions and a demonstration video.

Smart HDR TV - How do I use Screencast/Multiscreen on my Android device?

NOTE: Your TV and phone must be connected to the same network in order to use the Screencast feature. Best suited for newer Android devices, some Android devices may not support this function. This process will not work with iPhones or iDevices. An Apple TV is required for mirroring from an iPhone.

PVR Function

PVR File System Settings

1. Press MENU key to display the main menu on the screen.
2. Press ▲/▼ key to select “Function” option.
3. Press ► key to enter “Function” submenu. 
4. Press ▲/▼ key to select “PVR File System” option.
5. Press ENTER or ► key to enter submenu in DTV mode.

Connect the USB disk to the standard USB port before using PVR.

Select Disk:	Press “ENTER” button to enter submenu and press “◄/►” to choose the disk for PVR.
PVR File System:	Press “ENTER” button to check if the disk is adapt to PVR.
USB:	Display if the USB Disk is adapt to PVR.
Format Start:	Press “ENTER” button to enter format submenu.
Speed Check:	Display the disk writing/reading speed.
Time Shift Size:	Display the buffer used for PVR.

It is suggested to use the disk whose speed is at least 4500KB/s.

Warnings:

1. The disk must be formatted when first used for PVR, so back up the original data on the disk.
2. It's suggested to use a special disk for PVR. Don’t modify the PVR file on a PC.

PVR Use

When the DTV channel has signal, press “” key to go to the PVR main menu.

1. Press ▲/▼ key to select “Start Record”. If the storage device is ready, press “ENTER” key to start record.

The recording menus will disappear in 5 seconds, press “EXIT” key to recall them out. When recording, press "" key again, then you can choose to stop recording or continue.

2. Press ▲/▼ key to select "Recorded Files". If the storage device is ready, press “ENTER” key to check the record list.

1. Press ▲/▼ key to select the recorded file.
2. Press “ENTER” or ►/ll key to play the selected record file.
3. Press "Red" key to delete the selected file.
4. When recorded files are playing, press  button to fast rewind or forward

3. Press ▲/▼ key to select "Schedule Recording".
In the Schedule Recording menu, you can see the record task list menu.
Press “ENTER” key to select one test.

1. Press "Red" key to delete the task.
2. Press "Yellow" key to Edit the task.
3. Press "Blue" key to add a new task directly.

When the Scheduled record, TV remains silent and black screen, then press the power button to turn on the TV.

Note: The recording times cannot overlap, otherwise the previously recorded programs will be overwritten.

4. In DTV channel, press “ ►/ll ” key to pause, press it again to resume playback.
This is the “Time Shift”. During the suspension the image is temporarily stored in the disk, so programs will not miss the suspension period, the length of time may be suspended by the size of the disk buffer space constraints.

This feature supports fast forward and rewind functions. Press “  ” key to go backward or forward.

5. In EPG menu, press "Red" key to go to manual record mode. Press Left/Right key to choose the manual record mode, press ▲/▼ key to select the Start/End time of the manual record.

Connecting to a Soundbar/Sound System

 The main thing to look out for when wanting to connect your TV to a soundbar or sound system is the output ports on your TV, and the input ports your soundbar/sound system accepts.

If there is a match between these, you will be able to connect the two.

Typically, this will be as simple as connecting the outputs to the respective input on the soundbar or sound system. Use a 3.5mm AUX cable for AUX or headphone input/output, and an optical cable for optical audio input/output, and a coaxial audio cable for coaxial audio input/output. These can be purchased from our website.

After connecting the unit, you may be required to set the input audio mode on the soundbar/sound system so the unit knows where to expect the audio from.

You can find the user manuals for some of our Kogan Soundbars below.

Kogan 2.1CH 80W Soundbar With Built-in Subwoofer

Kogan 2.1CH 100W Detachable Soundbar with Wireless Subwoofer

Kogan 2.0CH 40W Soundbar

Troubleshooting

FAQ

FAQ	Answer
I am concerned about the picture quality or resolution of my TV.	Picture Quality Troubleshooting
How do I use Netflix on my device?	Netflix - What Is It and How Can I Use It?
Freeview - What Is It and How Can I Use It?	Freeview - What Is It and How Can I Use It?
Which Wall Mount is Right for My TV?	Which Wall Mount is Right for My TV?
How do I connect to a Soundbar?	How to Connect your TV to a Soundbar or Sound System
My TV is not turning on and doesn't seem to have any power.	My TV is not turning on and doesn't seem to have any power.

 

Many minor issues can be resolved by hard resetting, or power cycling the unit or upgrading the firmware.

To perform a hard reset, or power cycle, please use the following steps.

1. Unplug it from the main power socket and leave it for 10-15 minutes.

2. Press and hold the power button on the TV for 5 seconds.

3. Connect the TV back to the power and turn it on.

Please refer to the TV Troubleshooting Guide for further assistance.

Alternatively, you are welcome to contact our Support Team with any queries - please note that a photo or video of the issue can assist with identifying and resolving the issue.

Firmware Updates/Upgrades

Please click on the link corresponding to your TV model number for instructions on how to perform a firmware upgrade.

KALED55MU8010SZA - FIRMWARE UPGRADE

KALED55MU8010SZB - FIRMWARE UPGRADE

KALED65MU8010SZA - FIRMWARE UPGRADE

KALED75MU8010SZB - FIRMWARE UPGRADE 

This video shows the steps to carry out a firmware update on your TV:

• Kogan TV Firmware Installation Video

Note: ONLY use the firmware upgrade that matches the exact model number of your TV. Other firmware upgrades will not be compatible and may cause further issues. If you are unsure, you can find your model number on a label on the back of your TV.

Specifications

	Kogan 43" Smart HDR 4K LED TV KALED43MU8010SZA KALED43MU8010SZB	Kogan 49" Smart HDR 4K LED TV KALED49MU8010SZA	Kogan 55" Smart HDR 4K LED TV KALED55MU8010SZA KALED55MU8010SZB	Kogan 65" Smart HDR 4K LED TV KALED65MU8010SZA	Kogan 75" Smart HDR 4K LED TV KALED75MU8010SZA KALED75MU8010SZB	Kogan 55" Curved Smart HDR 4K LED TV KALED55MU8510SZA KALED55MU8510SZB
LED Panel Resolution	3840 x 2160	3840x2160	3840 × 2160	3840x2160	3840x2160	3840 x 2160
Speaker Output Power	2 x 10W	2 x 10W	2 x 10W	2 x 10W	2 x 10W	2 x 10W
Input Ports	Both Models: 1x Antenna 1x Component in 3x HDMI in 1x VGA in Only Model A: 1x AV in	1x Antenna 1x Component in 1x AV in 3x HDMI in 1x VGA in	1x Antenna 1x Component in 1x AV in 3x HDMI in 1x VGA in	1x Antenna 1x Component in 1x AV in 2x HDMI in	1x Antenna 1x Component in 1x AV in 3x HDMI in 1x VGA in	1x Antenna 1x Component in 1x AV in 2x HDMI in
Output Ports	Both Models: 1x Coaxial audio out Only Model A: 1x 3.5mm stereo audio out	1x 3.5mm stereo audio out 1x Coaxial audio out	1x 3.5mm stereo audio out 1x Coaxial audio out	1x Coaxial audio out	1x 3.5mm stereo audio out 1x Coaxial audio out	1x Coaxial audio out
Power Consumption	90W	110W	120W	176W	280W	115W
Standby Consumption	<1W	<1W	<1W	<1W	<1W	<1W
Dimensions	Without Stand: 971.5 x 82.3 x 568.9mm With Stand: 971.5 x 222.3 x 614.6mm	Without Stand: 1106.2 x 85.3 x 643.9mm With Stand: 1106.2 x 259.9 x 694.6mm	Without Stand: 1245 x 85 x 722mm With Stand: 1245 x 259 x 778mm	Without Stand: 1452 x 72.2 x 865.8mm With Stand: 1452 x 287.9 x 930.3mm	Without Stand: 1682 x 68 x 966mm With Stand: 1682 x 335 x 1030mm	Without Stand: 1230 x 128 x 736mm With Stand: 1230 x 272 x 804mm
Weight	7.6kg	9.68kg	13kg	22.5kg	34.8kg	14.5kg
Response Time	9ms	9ms	9ms	6ms	8ms	8ms
VESA Wall Mount Pattern	200 x 200 | M6 Screw	200 x 200 | M6 Screw	400 x 200 | M6 Screw	400 x 200 | M6 Screw	600 x 400 | M8 Screw	200 x 200 | M6 Screw
Brightness	250 cd/m2	250 cd/m2	250 cd/m2	300 cd/m2	300 cd/m2	280 cd/m2
Colours	1.07B	1.07B	1.07B	1.07B	1.07B	1.07B
USB Media Playback Formats	JPG, JPE, PNG, BMP, MP3, AAC, MPG, MPEG4, H.265	JPG, JPE, PNG, BMP, MP3, AAC, MPG, MPEG4, H.265	JPG, JPE, PNG, BMP, MP3, AAC, MPG, MPEG4, H.265	JPG, JPE, PNG, BMP, MP3, AAC, MPG, MPEG4, H.265	JPG, JPE, PNG, BMP, MP3, AAC, MPG, MPEG4, H.265	JPG, JPE, PNG, BMP, MP3, AAC, MPG, MPEG4, H.265
Computer Supported Resolutions	Both Models: 640 x 360 @ 60Hz 853 x 480 @ 60Hz 1024 x 576 @ 60Hz 1280 x 720 @ 60Hz 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz Only Model A: 3840 x 2160 @ 60Hz	640 x 360 @ 60Hz 853 x 480 @ 60Hz 1024 x 576 @ 60Hz 1280 x 720 @ 60Hz 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz 3840 x 2160 @ 60Hz	640 x 360 @ 60Hz 853 x 480 @ 60Hz 1024 x 576 @ 60Hz 1280 x 720 @ 60Hz 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz 3840 x 2160 @ 60Hz	640 x 360 @ 60Hz 853 x 480 @ 60Hz 1024 x 576 @ 60Hz 1280 x 720 @ 60Hz 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz	640 x 360 @ 60Hz 853 x 480 @ 60Hz 1024 x 576 @ 60Hz 1280 x 720 @ 60Hz 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz 3840 x 2160 @ 60Hz	640 x 480 @ 60Hz 800 x 600 @ 60Hz 1024 x 768 @ 60Hz 1360 x 768 @ 60Hz 1920 x 1080 @ 60Hz 3840 x 2160 @ 60Hz
Panel	A: LG B: BOE	LG	A: LG  B: Samsung	LG	AUO	A: Samsung B: SDC

 Note: Some computer supported resolutions are only available with an HDMI connection.

A .pdf version of this manual is unavailable, however, you can print out this webpage if you would prefer a hardcopy.

If you require any assistance, please feel free to contact our Support Team via your Kogan.com account.