Kogan IP65 Water Resistant Portable Bluetooth Speaker with 360 Sound - (KASPKIP65BA) - Manual
It is normal that the speaker will get hot while playing or charging.
Please turn off the speaker and disconnect it from all audio devices before cleaning. Do not use alcohol, benzene or other chemicals to clean the speaker.
Do not throw or tread on the speaker. Please place it on a stable surface when in use.
Do not place the speaker close to extremely cold or hot objects.
Please use the original accessories provided by us.
Do not disassemble the speaker without authorisation.
Charging: Please fully charge the speaker for about 5.5~6 hours before first use.(The indicator light is red when charging, and it will turn to green after fully charged.) Use the original charging cable to connect to the power adapter (DC 5V/1 A) to get charged.
Power On/Off: Long press the power button " " until the blue indicator light flashes, then release the power button, the speaker turns on with a prompt tone.
Bluetooth Pairing: After turned on, the blue indicator light keeps flashing quickly. Then open your smartphone’s Bluetooth function, search for and choose "X26”. After successful pairing, you will hear the“di~di” prompt tone. Now you can play music from your smartphone with this speaker.
Automatic Connection: If you already paired with a phone, tablet or other Bluetooth devices, when it turns on again, the speaker will automatically pair with this device.
After paired successfully, the blue light flashes slowly, and you can play music or video via the paired device, and can check the battery level on a paired tablet or smartphone.
When you are playing music via Bluetooth, short press "+" to increase the volume, long press "+" to listen to the next song
When you are playing music via Bluetooth, short press "-" to decrease the volume, long press "-" to listen to the previous song.
When the speaker is connected with iOS device, the volume control is synchronized (You can control the volume from the iOS device).
After paired successfully, short press "" to play and pause.
After paired successfully, when there is a call coming through, short press play/pause button to pick up the call with this speaker, long press the Play/Pause button for 2 seconds to reject this call, and when answering the call, short press the Play/Pause button to end it.
Redial: double press the Play/Pause button, your smartphone will redial your last dialed number.
Automatic Power Off: the speaker will turn off in 10 minutes in the below situations to save battery power: A. The device is not connected. B. The phone is out of transmission range. C. The Bluetooth is turned off in your phone.
Pair to Another Smartphone: Method A: Turn off the smartphone A’s Bluetooth function, you will hear the "di~di” prompt tone and the blue indicator light will begin to flash quickly. Then the smartphone B can search for "X26” and choose it to pair. Method B: Long press the Play/Pause button for 3 seconds until you hear the "di~di” prompt tone, the blue indicator light will begin to flash quickly, it means that the smartphone B could search for “X26” and choose it to pair.
Clear Paired Information: The speaker can remember up to 8 devices pairing information. If you need to clear this information, turn on the speaker, and long press the Play / Pause button for 6 seconds until you hear the “di~di” prompt tone and the pairing information list is cleared.
TWS connection (connecting two speakers): Power on the two speakers, do not pair it with your phone, first long press "" button of each speaker to set them into the TWS paring mode, and after paired successfully, the blue indicator no flash. And then open the Bluetooth in your phone to connect one of the X26 to play music. (NOTE: TWS means True Wireless System)
Low Battery Warning: When the speaker’s battery is less than 20%, the red indicator light will flash, then please charge the speaker. When the battery is less than 5%, it will turn off automatically.
Charging time: DC 5V/1 A, 5.5~6 hours, the indicator light is red during charging and it will turn to green after fully charged.
If the speaker is not to be used for a long time, please fully charge it at least once a month to avoid decreasing the speaker battery life.
Note: When speakers are in TWS pairing mode, all the control functions are in sync, so please only operate one of them.
CSR4.2 + TWS
dia.40 x2 4ohm 6W
70 x 150mm
The “X26” device is in smartphone’s Bluetooth device list but failed to connect. Reason A: The speaker is not in pairing mode. Solution: Long press the Play/Pause button for about 3 seconds to set it to pairing mode, when the blue indicator light flashes fast, choose "X26" to pair. Reason B: The speaker’s paired information has been cleared. Solution: Delete the paired device "X26" from your phone, then search"X26" and choose it to pair again.
The smartphone could not search"X26". Reason: The speaker is not in pairing mode. Solution: Long press the “Play/Pause” button for about 3 seconds to set it into pairing mode, when the blue indicator light flashes fast, choose "X26" to pair.
The charging time is too long. Reason: The adapter’s power output is too low, and the charging cable’s consumption is too high. Solution: Please choose the adapter with output not less than DC 5V/1A and use the original charging cable.