Safety & Warnings
Read all instructions before using the appliance and retain for reference.
- Unplug the monitor before cleaning it with a slightly damp, clean cloth.
- Wiping the screen once it has been turned off with a dry microfibre cloth is recommended.
- Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
- This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
- Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
- Do not insert any objects or spray any liquids into the vents.
- Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
- Unplug the monitor if it is not going to be used for an extended period of time.
- Do not place heavy objects on the monitor, its power cord or any connected cables.
- Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
Overview
Monitor Controls
|
1. |
Menu: Press to display OSD menu and enter sub-menus |
4. |
Exit: Press to exit OSD menu |
|
2. |
Down: Press to move down in menus |
5. |
Power: Press to turn monitor on/off |
|
3. |
Up: Press to move up in menus |
6. |
LED Indicator: See above |
Note: Button 4 (E) can also switch between colour gamuts when a compatible graphics card and HDMI / DP connection are in use.
Indicator Light
Solid blue/green/white light indicates power is on and monitor is operating normally. Flashing blue light indicates no video source has been detected.
Red light indicates no signal detected or insufficient power received: check computer is set to send video output and that all cables are fully inserted and secure.
Monitor Ports
| 7. | Power Input | 10. | HDMI 1 Input (2.0) |
| 8. | Audio output to connect headphones or powered speakers | 11. | HDMI 2 Input (1.4) |
| 9. | DisplayPort input | 12. | HDMI 3 Input (1.4) |
Stand Installation
- Keep the foam underneath the monitor before attaching the stand.
- To avoid damage, do not touch the screen when moving the monitor.
1.Open the package and take out the product with foam still attached.and gently place it on a desktop or table.
2. Use the three screws to fasten the base to the stem.
3. Take out the monitor and remove the bottom foam section.
4. Align the stand stem’s bracket with the opening on the back of the monitor, and carefully insert bracket, the pieces should click into place.
5. Before removing the stand, remove the port cover from the back of monitor, press the button to remove the monitor from the bracket.
Cable Management
Remove the back cover from the stand's stem. Thread any cables through and connect them to the monitor, replace the back cover.
To avoid damage, do not touch the screen when moving the monitor.
Wall Mounting
This monitor only includes screws which may be used when attaching the monitor to a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor If the monitor was already attached to the stand, remove the stand.
2. Remove the original screws x4 (1) from the opening in the back of the monitor. Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired. Remember to use the included 2 screws when attaching anything to the back of the monitor. Refer to the image (2) for correct screw placement.
3. Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired.
Picture in Picture (PIP) Input
• PIP is supported with any secondary connection separate to the primary connection being used (e.g. secondary DP with primary HDMI). The recommended configuration is 2x 1440p@144Hz.
System Requirements
| Operating System | Windows® 7 / Windows® 8 / Windows® 10 64-bit or higher Intel® |
| Processor (CPU) | Core™ i5 or AMD Phenom™ II X3 or higher NVIDIA® GeForce® |
| Graphics Card | GTX 950 or AMD Radeon™ R9 380 or higher |
| Memory | 6 GB RAM |
Connectivity
Power Cable
Connect the included Power Cable to the Monitor, then plug the other end into an AC outlet.
3.5mm Audio Output
Connect a 3.5mm audio device (e.g. headphones or externally-powered speakers, not included).
Listening to loud audio for prolonged periods of time may permanently damage your hearing
DisplayPort
Connect to this monitor from your compatible computer using a DisplayPort cable (not included) to receive a high-quality digital video signal.
HDMI
Connect to this monitor from your compatible computer using an HDMI cable (included) to receive a high-quality digital video signal.
Operation
Setup
- For a basic setup, connect the monitor to your PC's graphics card using the included DisplayPort cable. An HDMI cable (not included) can be used instead.
- Connect the cable to the corresponding connector on your monitor as outlined in the Connectivity section of this user guide.
- Connect the power cable as outlined in the Connectivity section of this user guide.
- Press the power button on your monitor to turn it on.
OSD Menu
The On-Screen Display (OSD) menu can be used to adjust your monitor's settings.
When first connecting the monitor to your PC, settings will adjust automatically based on the configuration of your PC.
- Press any button to activate the navigation window.
- Press M to enter the OSD scree
- Press Up or Down to browse functions and change Press M to enter the sub-menu for a highlighted sub-menu Press E to exit the current screen
List of functions
|
Main Menu |
Sub-Menu |
Options |
Description |
|
Input Source |
DP |
NONE |
Select DP input |
|
HDM11(2.0) |
NONE |
Select HDMI input |
|
|
HDMI 2(1.4) |
|||
|
HDMI 3(1.4) |
|||
|
Brightness/ Contrast |
Brightness |
0-100 |
Adjust display brightness |
|
Contrast |
0-100 |
Adjust display contrast |
|
|
DCR |
ON |
Turn DCR function on |
|
|
OFF |
Turn DCR function off |
||
|
Colour Setting |
Gamma |
Gamma 1.8 |
Set gamma |
|
Gamma 2.0 |
|||
|
Gamma 2.2 |
|||
|
Gamma 2.4 |
|||
|
Gamma 2.6 |
|||
|
Picture Mode |
Standard, Photo, Movie, Game, FPS, RTS |
Set a preset display mode |
|
|
Colour Temperature |
Warm, Cool, User |
Set the display colour temperature mode |
|
|
Low Blue Light |
0-100 |
Set the display blue light filtering |
|
|
Hue/Saturation |
0-100 |
Set the hue and saturation |
|
|
Picture Quality Setting |
Sharpness |
0-100 |
Set display sharpness |
|
Response Time |
Off, High, Middle, Low |
Change response time |
|
|
Noise Reduction |
Off, High, Middle, Low |
Reduce image noise caused by signal interference |
|
|
Super Resolution |
Off, High, Middle, Low |
Enhance image resolution |
|
|
Dynamic Luminous Control |
On, Off |
Strengthen greyscale expression |
|
|
Display |
Aspect Ratio |
Wide Screen, 4:3,1:1, Auto |
Set display ratio |
|
Audio |
Mute |
On, Off |
Toggle Mute on/off |
|
Volume |
0-100 |
Set the audio volume |
|
|
Audio Source |
HDMI 1(2.0) |
Display the input signals from (HDMI or DP) |
|
|
HDMI 2(1.4) |
|||
|
HDMI 3(1.4) |
|||
|
DP |
|||
|
Multi Window |
Multi-Window |
Off, PIP Mode, PBP2Win |
Set Picture-in-Picture or Picture-byPicture options |
|
Sub Win2 Input |
DP |
|
|
|
HDMI 1(2.0) |
|||
|
HDMI 2(1.4) |
|||
|
HDMI 3(1.4) |
|||
|
PIP Size |
Small, Medium, Large |
Adjust PIP/PBP display window size |
|
|
PIP Position |
Top Right, Top Left, Bottom Right, Bottom Left |
Adjust PIP/PBP window position |
|
|
Swap |
NONE |
Swap primary and secondary inputs |
|
|
OSD
|
Language |
English, |
Set OSD language |
|
OSD H-Position |
0-100 |
Adjust OSD horizontal position |
|
|
OSD V-Position |
0-100 |
Adjust OSD vertical position |
|
|
OSD Transparency |
0-100 |
Set OSD transparency |
|
|
OSD Time Out |
5-100 |
Set OSD timeout in seconds |
|
|
OSD Rotation |
Normal, 90,180, 270 |
Rotate OSD for ease of use on rotated displays |
|
| Other |
DP Version |
DP 1.1, DP 1.2 |
Set DisplayPort version |
|
Free Sync (AdaptiveSync) |
On, Off | ||
| HDR | On | ||
| Off | |||
| Auto Detect | |||
| Reset | Reset configuration | Restore factory defaults |
, 
, 
Please Note: When choose PIP/PBP function, make the default resolution in split screen mode 1920x1080 by hand.
AMD FreeSync
If desired, you can use the monitor’s AMD FreeSync feature. In order to use this feature, please note you must have hardware with AMD FreeSync™ capability, a DisplayPort cable, and the latest graphic drivers. To use this feature, connect the appropriate cable to the DP connectors on both the computer and Monitor. After connecting, you will receive a prompt to enable the feature on your computer.
Gameplus
Press the up button in the OSD settings to toggle on-screen centre icons for FPS games or other scenarios.
Troubleshooting
|
Issue |
Possible cause / Steps to resolve |
|
Screen is blank |
Ensure power button has been pressed |
|
Image out of focus Screen is flashing |
Check video cable connection |
|
Colour bleeding, distortion or other unusual effects |
Check video cable connection |
|
Screen strolling, rolling or moving |
Check source frequency is within 55-76Hz |
|
Indicator light not illuminated |
Check power connection |
|
No video signal |
Confirm PC and graphics card compatibility |
|
Dim image Image jitter/moire pattern |
Adjust brightness/contrast |
|
Indicator on or flashing but no image on screen |
Confirm monitor has been turned on |
|
Position or size incorrect |
Check settings in monitor OSD menu and PC display settings |
Specifications
|
Screen Size |
49" |
Output |
Audio |
|
Curvature |
1800R |
Signal Input |
DP,HDMI1,HDMI2,HDMI3, |
|
Viewing Angle (H/V) |
1787178° |
Power |
AC 100-240V, 50/60HZ 2.0A |
|
Aspect Ratio |
32:9 |
OSD Language |
English, |
|
Resolution |
3840x1080p |
Environmental Temperature & Humidity |
Operating temperature: 0-40°C |
|
Backlight |
E-LED |
Storage temperature: -20-60°C |
|
|
Default Colour Temperature |
6500 |
Operating relative humidity: RH 10% to 85% (non-condensation) |
|
|
Typical Brightness |
MAX 320 |
Height Adjustment |
N/A |
|
Contrast Ratio |
3000:1 |
VESA Mounting |
With VESA additional bolt |
|
Dot Pitch |
0.1038(H)x0.3115(V)mm |
Refresh Rate |
up to 144Hz |
|
Response Time |
8ms |
|
|
If you require any assistance, please contact our Support Team via your Kogan.com account.