Safety & Warning
- Folding and unfolding of the massage table should be performed by two people.
- Always place the table on a flat, stable surface. Make sure all legs are at the same level to avoid instability which may lead to injury.
- Carry out maintenance checks on the table periodically. Make sure all screws are secured and that cables are not deteriorated or frayed. Make sure there are no cracks in the wood or other parts.
- Do not overload the table beyond the recommended weight limit. This could result in damage to the table and serious injury to the user. Do not put your fingers into any gaps in the table or into the buckle on the bottom of the table.
- Do not use alcohol based cleaners when cleaning the PVC cover. This can cause damage to the material. Wipe clean with a damp cloth only.
Parts List
|
Description |
Quantity |
|
Leg Knob |
4 |
|
Long Cable |
2 |
|
Short Cable |
4 |
|
Leg Cap |
4 |
|
Hinge |
3 |
|
Handle |
2 |
|
PVC |
3 |
|
Short Brace |
4 |
|
Long Brace |
4 |
|
Bottom Brace |
2 |
|
Buckle |
2 |
|
Armrest |
2 |
|
Hand Deck |
1 |
|
Headrest |
1 |
Setting Up Your Table
| Step 1 - Lay table on a flat floor. Release the buckles. |  |
| Step 2 - Open the table. |  |
| Step 3 - Straighten the braces, ensuring they are at 90 degree angles to the table. |  |
| Step 4 - Lift the table until all four legs are Uv flat on the floor. |  |
| Step 5 - Take out the headrest with the cushion on it, and the hand deck, and insert it into the end table holes. |  |
| Step 6 - Insert the armrests. |  |
| Step 7 - Release the mid buckle, then lift the back up to a suitable height. |  |
| Step 8 - Check each section of the table to ensure it is steady and secure before anyone climbs onto it. |  |
Packing The Table Away
| Step 1 - Lower the back and remove the armrests/headrest, then lay the table on it's side. |  |
| Step 2 - Fold the legs away back under the table, then close the table up and lock the latches. |  |