Safety & Warnings
Note the following precaution before assembling or operating the machine
- Assemble the machine exactly as the descriptions in the instruction manual.
- Check all the screws, nuts and other connections before using the machine for the first time and ensure that the trainer is in the safe condition.
- Set up the machine in a dry level place and leave it away from moisture and water.
- Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the machine in the area of assembly to avoid dirt and etc.
- Before beginning training, remove all objects within a radius of 2 meters from the machine.
- Do not use aggressive cleaning articles to clean the machine, Only use the supplied tools or suitable tools of your own to assemble the machine or repair any parts of machine. Remove drops of sweat from the machine immediately after finishing training.
- Your health can be affected by incorrect or excessive training. Consult a doctor before beginning a training program. He can define the maximum setting (Pulse. Watts. Duration of training etc) to which you may train yourself and can get precise information during training. This machine is not suitable for therapeutic purpose.
- Only do training on the machine when it is in correct working way. Use only original spare parts for any necessary repairs.
- This machine can be used for only one person’s training at a time.
- Wear training clothes and shoes which are suitable for fitness training with the machine. Your training shoes should be appropriate for the trainer.
- If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop training and consult a doctor ASAP.
- People such as children and handicapped persons should only use the machine in the presence of another person who can give aid and advice.
- The power of the machine increases with increasing the speed, and the reverse. The machine is equipped with adjustable knob which can adjust the resistance. Reduce the resistance by turning the adjusting knob for the resistance setting towards stage 1. Increase the resistance by turning the adjusting knob for the resistance setting towards stage 8.
- The maximum user’s weight is 80kg.
Exploded Diagram
Parts List
|
No. |
Description |
QTY |
No. |
Description |
QTY |
|
1 |
Main frame |
1 |
11 |
End caps |
4 |
|
2 |
Front bottom tube |
1 |
12 |
Screw |
2 |
|
3 |
Rear bottom tube |
1 |
13 |
Arc washer |
2 |
|
4 |
Saddle post |
1 |
14 |
Sensor wire |
1 |
|
5 |
Handlebar |
1 |
15 |
Tension controller |
1 |
|
6L/R |
Crank |
1pr |
16 |
Seat |
1 |
|
7L/R |
Pedal |
1pr |
17 |
Plum knob |
1 |
|
8 |
Meter |
1 |
18 |
Acorn Nut |
4 |
|
9 |
Flat washer |
3 |
19 |
Arc washer |
4 |
|
10 |
Nylon nut |
3 |
20 |
Carriage bolt |
4 |
Assembly Instructions
Step 1
Attach the Front bottom tube (2) and Rear bottom tube (3) to the Main frame (1) with Carriage bolt (20), Arc washer (19) and Acorn nut (18).
Step 2
Attach the Handlebar (5) to the Main frame (1) with Bolt (12) and Arch washer (13).
Step 3
Connect the Sensor wire (14) with the relevant wires coming from the Computer (8), and then fit the Computer (8) onto the computer bracket.
Step 4
Fix the Pedal (7L/R) to the Crank (6L/R) separately.
Note: Both pedals are labeled L FOR LEFT and R FOR RIGHT.
Important:
To tighten, please turn the left pedal COUNTERCLOCKWISE and the right pedal CLOCKWISE.
Step 5
Fix the saddle (16) to the saddle post (4) with flat washer (9) and nylon nut (10), then insert the saddle post (4) into the main frame (1), adjust the saddle to a comfortable height then fix it with plum knob (17).
This X-bike is foldable, please be careful when folding or unfolding the bike!
