Safety and Warnings
Do not place your hands near the struts or support bars when adjusting height, as the angles change quickly which may result in your fingers or hand being pinched and/or injured.
 |
Please make sure all installed equipment is placed securely on the riser and not sticking out over the edges as they may tip or be knocked off accidentally. |
 |
Please ensure there is enough length on the cables to compensate for height adjustments, as raising the desktop may result on expensive electrical equipment being damaged. |
 |
Please press down on the grips to give the desktop a downward force when adjusting the height if the objects on the desktop weight less than 3KG, as otherwise the desktop may rise unexpectedly, resulting in damage or injury. |
This product contains small items that could be a choking hazard if swallowed. Please keep these items way from children.
Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any parts of this installation, please contact the Kogan.com customer support team for further information.
Please check joint parts at least once every two months to ensure no parts are coming loose.
This product is designed for indoor use. Do not use outdoors.
Parts List
Note: the illustrations below are only for reference. They may differ slightly with the product received. If you are missing any parts, please contact the Kogan.com customer support team.
Assembly
Please read the full assembly instructions through before beginning. Ensure that you understand all steps before you start putting the riser together.
Step 1 - Remove from the packaging and place the riser onto a flat, steady table
Step 2 - Attach the keyboard stand as shown below
Step 3 - By pressing both handle grips at once, adjust the height as desired
Step 4 - Please place your devices onto the top of the desk riser
Step 5 - Arrange your cables with enough slack that the riser can be risen and lowered safely
