| Please read all instructions carefully before using this product. Retain a copy of this manual for future reference. The specific appearance of the product may slightly differ from the illustrations, and is subject to change without notice. |
Safety and Warnings
 |
Please do not put your hands near the supporting bars, as they can change during adjustment and cause injury. |
 |
Please make sure all equipment is installed safely on the desktop or table, with no parts sticking out over the edge. |
 |
Please ensure there is enough length on the cable for height adjustments, as otherwise adjustments may lead to devices being pulled off the unit. |
 |
When possible, remove all equipment from the unit before adjusting the height, as this will help avoid damage. |
 |
Please move the unit with another person, as parts may move in transit and cause pinching or collisions. |
Product Overview
Dimensions and Weight Limits
WARNING: Please do not exceed the maximum bearing weight.
What's In The Box
Note: the illustrations below are for reference only and may be slightly different to the supplied product. If you find any parts missing or experience any installation problems, please contact the Kogan.com customer support team.
Installation
Assembly Step 1
Please open the carton, take the unit out and place it on a table or desk.
WARNING: Please take care to place the unit on a steady, even surface.
Assembly Step 2
- Hang the junction plate on the knob assembly, then tighten the knob.
- Connect and firmly fix the junction plate and keyboard tray using a phillipshead screwdriver to fasten.
Attach the decorative cover to the connecting arm.
Assembly Step 3
Based on actual usage, press the handle grips on both sides simultaneously, then adjust the workstation so it will sit at the correct height.
WARNING: please do not put your hands near the supporting bars, as they can clamp shut during adjustment, and this may pinch you.
Assembly Step 4
please place the device onto the top of the workstation
CAUTION: please make sure all equipment is placed securely on the table or desk, with no parts of the stand or the computers themselves sticking out over the edge, as being knocked may cause damage to your equipment or injury.
Assembly Step 5
CAUTION: The adhesive buckles will help keep your cables tidy and secured. Please ensure there is enough length on the cable for height adjustments, as otherwise adjustments may lead to devices being pulled off the unit.