Product Overview
|
1. Reset Button |
5. LAN | 9. USB Type C |
|
2. DC Input |
6. USB 2.0 | 10. / 11. USB 3.0 |
| 3. VGA | 7. Audio |
12. TF Card |
|
4. HMDI |
8. Microphone | 13. Power Button |
Connection
- Turn on the TV or monitor and change the video output to HDMI.
- Connect the PC to the HDMI connector of the TV or monitor with a HDMI cable.
- Connect the power adapter the into the wall socket, and the other end into the DC port on the PC.
- Press the power button and the PC will turn on and boot into windows.
Package Content
Specifications
|
Chipset |
Intel J3455 2.3GHz 64bit |
|
GPU |
Intel HD Graphics |
|
RAM |
4GB |
|
ROM |
32GB/ 64GB |
Main Features:
|
OS |
Windows 10 |
|
3D |
Hardward 3D Graphics Acceleration |
|
Support Decoder format |
HEVC (H.265 @ 4Kx2K), H.264 @5.1, SVC, VP8 1080p, VP8 4K,VP8 stereo, MPEG4 ASP/SP, AVS, BD2.4, H.263 |
|
Support Media format |
H.264@ 5.1, VP8 1080p, VP8 4K, VP8 stereo, SVC, AVS, H.263 |
|
Support Music format |
MP3, AAC, AC3/DD+, WMA9, PCM (WAV) |
|
Support Photo format |
HD JPEG/BMP/GIF/PNG/TIFF |
|
USB host |
2 High speed USB 3.0, 2 High speed USB 2.0, support USB DISK and USB HDD |
|
Card reader |
TF Card |
|
SATA DISK |
Support SATA DISK |
|
HDD file system |
FAT16/FAT32/NTFS |
|
OSD type of languages |
English/Chinese languages |
|
LAN |
Support RJ45 10/100M/1000M |
|
WiFi |
802.11ac |
|
Bluetooth |
Bluetooth V4.0 |
|
Mouse/ Keyboard |
Support mouse and keyboard via USB; Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle |
|
HDMI |
Support 4K x 2K |
|
Microphone audio |
3.5mm Microphone jack x1 |
|
Power KEY |
Support Power KEY |
|
Dimension |
L222*W152*H52(mm) |
|
Weight |
1000g |
Mounting the PC
Your monitor must have VESA mounting to be able to mount the PC.
To mount your PC:
- Attach the VESA standard bracket (included) to back of the monitor with screws
- Hang the Mini PC on the bracket
Please Note: The bracket shown above is for representation only, the bracket that arrives with the PC is shown below:
Once the bracket is mounted to the monitor. the PC slides onto the bracket as shown:
Installing a 2.5" HDD
1. Disconnect your Mini PC from all power sources and unplug any attachments.
2. Flip the unit over and remove the four screws from the bottom plate.
3. Remove the bottom plate from the unit.
4. Remove the two inner rails from the unit.
5. Locate the four short screws in your product box.
6. Use these to attach the inner rails to your HDD.
7. Place this into the PC enclosure, making sure to connect the HDD to the existing contacts and screw the inner rails into place.
8. Replace the bottom plate and screw to secure.
Access the M.2 SSD Port
1. Disconnect your Mini PC from all power sources and unplug any attachments.
2. Using a rigid bit of plastic such as a business card or guitar pick to gently pry the lid from the main body of the unit.
3. The lid should easily disconnect from the body.
4. Remove the lid from the body. The SSD can be inserted into the port (circled) in the arrow direction. The hole just above the port can be used to secure the SSD into place.
NOTE: SSDs can be inserted in multiple orientations without damaging the unit, however, only one orientation will allow the SSD to be detected. If your SSD is not being detected, please attempt to insert it in a different orientation.
Software
The Kogan Atlas E300 Mini PC comes pre-installed with Windows 10. For more information about using Windows 10 please refer to the Windows Help Center.