Kogan 2.1 Soundbar with Built-in Subwoofer (80W RMS) - (KASB280WCA) - Manual

Safety & Warnings

• To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
• This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible of their safety. Children should be supervised to ensure that they do not play with the appliance.
• To prevent possible hearing damage, do not listen at high volumes levels for long time periods or a sudden high volume level.
• Never use the device unsupervised. Switch the device off whenever you are not using it, even if this only for a short time.
• The appliance is not intended to be operated by means of external timer.
• If the power cord is damaged, it must be replaced by the manufacturer.
• The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
• To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or
• Do not place this unit close to a strong magnetic
• Do not attempt to clean the unit with chemical solvents as this might damage the Wipe with a clean, dry or slightly damp cloth.
• When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
• The AC adaptor must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on apparatus.

Product Overview

Remote

To install batteries into the remove.
- Remove the back cover
- Insert the batteries in the correct position
- Close the battery cover

Operation

• Plug the sound bar into a power socket and the display will light up.
• Power on the soundbar by using the Standby/Power button on the sound bar or remote. The default input mode will appear on the display.
• Input modes can be changed by pressing the power button again or by using the INPUT button on the remote. The modes identified by the display are listed below:

	Bluetooth Mode
	HDMI (ARC) mode
	Optical Mode
	AUX mode

Bluetooth Mode

• Switch on the soundbar using the power button and switch the mode to Bluetooth mode using the PAIR button on the remote.
• Search for a new Bluetooth device from your phone/tablet/PC/etc.
• Select the device named “SB28W” and connect to it
  - if prompted for a password use "0000”
• The LED light will stop flashing when the soundbar has paired successfully.
• The soundbar will connect automatically to your device from this point on as long as it is saved in your devices list of Bluetooth connections. If connection has been removed then the soundbar will have to be paired again.
  NOTE: The soundbar can only be connected to one device at a time. To connect a new device the previous one must be disconnected.

 AUX Mode

• Switch on the sound bar using the power button and switch the mode to AUX input.
• Plug in a 3.5 AUX cable into the AUX IN connection on the soundbar.
• Play music from the device plugged into the other end of the AUX cable.

NOTE: To reach desired volume, make sure the volume on the connected device to turn to up to its maximum before adjusting the volume on the soundbar.

USB Mode

• Plug a USB flash drive containing music into the USB port on the side.
• Power on the soundbar and switch to USB mode
• The music on the USB will play automatically and can be controlled using the remote.

HDMI Mode

The soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HMDI ARC compliant then the TV audio can be passed through your soundbar using a single HDMI cable.

• Plug a HDMI cable between your TV and the HDMI ARC port on the soundbar.
• Power on the soundbar and select HDMI (ARC) mode.
• On your TV, select source as HDMI (ARC) mode. For details, see the TV user manual.

Optical Mode

• Using an optical cable connect your TV’s OPTICAL OUT to the OPTICAL connector on the soundbar.
• Power on the soundbar and select optical mode.

NOTE: If no sound is coming out of the soundbar, make sure the audio setting of your source player,(e.g DVD player, game player, TV) is set to PCM with optical output.

Troubleshooting